Inhaltszusammenfassung zur Seite Nr. 1
4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER
4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER
95504
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed Exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
®
Copyright © 20
Inhaltszusammenfassung zur Seite Nr. 2
Specifications DESCRIPTION ITEM 7-1/2” L x 5” W x 3-3/4” H Overall Dimensions 1”Dia. x 3-1/8”L (left side only) Handle Dimensions 1/4” - 18 NPT Female thread Inlet Size 90 PSI Max. Rated Air Pressure 6 CFM @90 PSI Air Consumption 10,000 RPM Maximum Speed Resin bonded aluminum oxide grit Wheel Material 4” Diameter x 1/4”Thickness Wheel Dimensions 5/8” Arbor Diameter 3/8” Spindle Thread 2.65 Lbs. Net Weight Save This Manual You will need the manual for the safety warnings and precautions, assembly
Inhaltszusammenfassung zur Seite Nr. 3
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restri
Inhaltszusammenfassung zur Seite Nr. 4
17. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 18. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 19. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescript
Inhaltszusammenfassung zur Seite Nr. 5
2. All accessories must be rated for at least the RPM speed recommended on the tool's warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. 3. For safest operation, it is recommended that only these accessories be used with this product: Abrasive Cut-Off Discs and Wheels, Flap Wheels, Wire Brushes, Wire Wheel Brushes. 4. Always use an approved and proper guard when using the above mentioned accessories. Each accessory must have the correct arbor s
Inhaltszusammenfassung zur Seite Nr. 6
1. Be sure to follow all safety precautions as listed on Pages 2-5 of this manual. 2. Acquire a 1/4” NPT air fitting (not supplied) and screw into the Air Inlet fitting. Tighten with a wrench. 3. Attach a quick-coupler (not supplied) to the air fitting if desired. This allows quick exchange of the Air Hose to other air tools. 4. Once the air compressor is off, connect the Air Hose to the Air Inlet Coupling. This air tool requires lubrication during operation. For best results, it is recom- mende
Inhaltszusammenfassung zur Seite Nr. 7
5. Check to be sure all attachments are secure before turning on the tool. Adjust the Wheel Guard so that it provides a shield between you (the user) and the material you are working on. The Wheel Guard must be in place at all times when using the Angle Grinder. 6. Grip the Handle [35] with your left hand and the Housing [25] with your right hand. Depress the Lever [31] with your right hand to turn the tool on. Allow the motor to reach its full speed before grinding. Make sure the Wheel is rot
Inhaltszusammenfassung zur Seite Nr. 8
Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as Parts List replacement parts. ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY 1 Disc Nut 2 19 Bearing Spacer 1 2 Disc Wheel 1 20 Rotor 1 3 Screw 4 21 Rotor Blade 4 4 Spring Washer 8 22 Cylinder 1 5 Disc Cover 1 23 Steel Ball 1 6 Gear Shaft 1 24 Bear Plate 1 7 Key 1 25 Housing 1 8 Ball Bearing 1 26 Air Inlet 1 9 Bevel Gear 1 27 Screw 1 10 Retaining Ring 1 28 Spring 1 11 Ball Beari
Inhaltszusammenfassung zur Seite Nr. 9
WARRANTY LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents; repairs or alterations outside our facilities; or to lack of maintenance.
