Bedienungsanleitung Harbor Freight Tools 46388

Inhaltszusammenfassung zur Seite Nr. 1

®
4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER
4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER 4” AIR ANGLE GRINDER
46388
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2001 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and

Inhaltszusammenfassung zur Seite Nr. 2

Specifications ITEM DESCRIPTION Overall Dimensions 6-3/4”W x 7-1/2”L x 3-5/8”H Handle Dimensions 1”Dia. x 3-1/8”L (left side only) Inlet Size 1/4” - 18 NPT Max. Rated Air Pressure 90 PSI Air Consumption 4 CFM Revolutions per Minute 11,000 Wheel Material Resin bonded aluminum oxide grit Wheel Dimensions 4”Diameter x 1/4”Thickness Arbor Diameter 5/8” Arbor Tolerance +.005”/- Nothing Spindle Thread 3/8” - 20 TPI Net Weight 3.35 Lbs. Save This Manual You will need the manual for the safety warnings

Inhaltszusammenfassung zur Seite Nr. 3

6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restri

Inhaltszusammenfassung zur Seite Nr. 4

of moving parts, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 17. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 18. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will

Inhaltszusammenfassung zur Seite Nr. 5

2. All accessories must be rated for at least the RPM speed recommended on the tool's warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. 3. For safest operation, it is recommended that only these accessories be used with this product: Abrasive Cut-Off Discs and Wheels, Flap Wheels, Wire Brushes, Wire Wheel Brushes. 4. Always use an approved and proper guard when using the above mentioned accessories. Each accessory must have the correct arbor s

Inhaltszusammenfassung zur Seite Nr. 6

1. Be sure to follow all safety precautions as listed on Pages 2-5 of this manual. 2. Acquire a Union fitting (not supplied) and screw into the Air Inlet fitting. Tighten with a wrench. 3. Attach a quick-coupler (not supplied) to the Union fitting if desired. This allows quick exchange of the Air Hose to other air tools. 4. Connect the Air Hose to the Air Inlet Coupling. This air tool requires lubrication during operation. For best results, it is recom- mended to have an oiler and water filter i

Inhaltszusammenfassung zur Seite Nr. 7

5. Check to be sure all attachments are secure before turning on the tool. Adjust the Wheel Guard so that it provides a shield between you (the user) and the material you are working on. The Wheel Guard must be in place at all times when using the Angle Grinder. 6. Grip the Handle with your left hand and the Housing [25] with your right. Depress the Trigger [31] with your right hand to turn the tool on. Allow the motor to reach its full speed before grinding. Make sure the Wheel is rotating eve

Inhaltszusammenfassung zur Seite Nr. 8

Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as Parts List replacement parts. ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY 1 Disc Nut 2 19 Bearing Spacer 1 2 Disc Wheel 1 20 Rotor 1 3 Screw 4 21 Rotor Blade 4 4 Spring Washer 8 22 Cylinder 1 5 Disc Cover 1 23 Steel Ball 1 6 Gear Shaft 1 24 Bear Plate 1 7 Key 1 25 Housing 1 8 Ball Bearing 1 26 Air Inlet 1 9 Bevel Gear 1 27 Screw 1 10 Retaining Ring 1 28 Spring 1 11 Ball Beari