Inhaltszusammenfassung zur Seite Nr. 1
Pressure Washer
Operator’s Manual
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON, WISCONSIN, U.S.A.
Manual No. 203656GS Revision A (08/13/2007)
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing this quality-built Briggs & Stratton pressure washer. We are pleased that you’ve placed your confidence in the Briggs & Stratton brand. When operated and maintained according to the instructions in this manual, your Briggs & Stratton pressure washer will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with pressure washers and how to avoid them. Because Briggs & Stratton does not nece
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Equipment Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpack Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Safety Rules Operator Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all Equipment Description safety messages that follow this symbol to avoid Read this manual carefully and become familiar possible injury or death. with your pressure washer. Know its applications, The safety alert symbol ( ) is used with a signal word its limitations, and any hazards involved. (DANGER, CAUTION, WARNING), a pictorial and/or a safety This high quality c
Inhaltszusammenfassung zur Seite Nr. 5
WARNING WARNING Running engine gives off carbon monoxide, an Fuel and its vapors are extremely flammable and odorless, colorless, poison gas. explosive. Breathing carbon monoxide can cause headache, Fire or explosion can cause severe burns or fatigue, dizziness, vomiting, confusion, seizures, death. nausea, fainting or death. Some chemicals or detergents may be harmful if WHEN ADDING OR DRAINING FUEL inhaled or ingested, causing severe nausea, • Turn pressure washer OFF and let it cool at least
Inhaltszusammenfassung zur Seite Nr. 6
WARNING WARNING Starter cord kickback (rapid retraction) can result The high pressure stream of water that this in bodily injury. Kickback will pull hand and arm equipment produces can cut through skin and its toward engine faster than you can let go. underlying tissues, leading to serious injury and possible amputation. Broken bones, fractures, bruises, or sprains could result. Spray gun traps high water pressure, even when engine is stopped and water is disconnected, • NEVER pull starter cord
Inhaltszusammenfassung zur Seite Nr. 7
WARNING NOTICE High pressure spray may damage fragile items including Starter and other rotating parts can entangle glass. hands, hair, clothing, or accessories. • DO NOT point spray gun at glass when using red 0° spray tip. • NEVER aim spray gun at plants. • NEVER operate pressure washer without protective housing or covers. • DO NOT wear loose clothing, jewelry or anything that may be NOTICE caught in the starter or other rotating parts. Improper treatment of pressure washer can damage it and
Inhaltszusammenfassung zur Seite Nr. 8
Attach Handle Assembly 1. Place handle (A) onto handle supports (B) connected to Read entire operator’s manual before you attempt main unit. Make sure holes (C) in handle align with to assemble or operate your new pressure washer. holes on handle supports. Your pressure washer requires some assembly and is ready A for use after it has been properly serviced with the recommended oil and fuel. If you have any problems with the assembly of your pressure C washer, please call the pressure washer hel
Inhaltszusammenfassung zur Seite Nr. 9
Add Fuel Connect Hose and Water Supply to Pump Fuel must meet these requirements: NOTICE • Clean, fresh, unleaded gasoline. DO NOT run the pump without the water supply connected • A minimum of 87 octane/87 AKI (91 RON). High and turned on. altitude use, see High Altitude. • Damage to equipment resulting from failure to follow this instruction will void warranty. • Gasoline with up to 10% ethanol (gasohol) or up to 15% MTBE (methyl tertiary butyl ether) is acceptable. NOTE: Remove and discard th
Inhaltszusammenfassung zur Seite Nr. 10
2. Similarly, attach other end of high pressure hose to 6. Turn ON the water, squeeze the trigger on the spray gun high pressure outlet (A) on pump. Pull down on collar to purge the pump system of air and impurities. of quick connect, slide onto pump and let go of collar. Pull on hose to be sure of tight connection. WARNING Risk of eye injury. A Spray can splash back or propel objects. • Always wear safety goggles when using this equipment or in vicinity of where equipment is in use. • Before st
Inhaltszusammenfassung zur Seite Nr. 11
Features and Controls Read this Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A K B L C M D N E P F Q G R H J S A - Spray Gun — Controls the application of water onto N - Air Filter — Protects engine by filtering dust and debris cleaning surface with trigger device. Includes trigger lock. out of int
Inhaltszusammenfassung zur Seite Nr. 12
How to Start Your Pressure Washer Operation To start your pressure washer for the first time, follow these If you have any problems operating your pressure washer, instructions step-by-step. This starting information also please call the pressure washer helpline at (800) 743-4115. applies if you have let the pressure washer sit idle for at least a day. Pressure Washer Location 1. Place pressure washer outside near a water source Clearances and Air Movement capable of supplying water at a flow ra
Inhaltszusammenfassung zur Seite Nr. 13
10. Push engine rocker switch to run position (I). WARNING Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go. Broken bones, fractures, bruises, or sprains could result. • NEVER pull starter cord without first relieving spray gun pressure. 11. Push choke lever (A) to “Choke” position. • When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback. • After each st
Inhaltszusammenfassung zur Seite Nr. 14
Follow these instructions to change spray tips: WARNING 1. Engage trigger lock on spray gun. Contact with muffler area can result in serious WARNING burns. The high pressure stream of water that this Exhaust heat/gases can ignite combustibles, equipment produces can cut through skin and structures or damage fuel tank causing a fire. its underlying tissues, leading to serious injury and possible amputation. • DO NOT touch hot parts and AVOID hot exhaust gases. • NEVER exchange spray tips without
Inhaltszusammenfassung zur Seite Nr. 15
How to Use the Turbo Nozzle Cleaning and Applying Detergent The turbo nozzle spins a 0° nozzle stream in a circular CAUTION pattern, providing an intense wide-spray pattern for scouring Chemicals can cause bodily injury, and/or property large surface areas fast and efficiently. damage. A turbo nozzle can easily cut through heavy oil and grease • NEVER use caustic liquid with pressure washer. stains on concrete, brick and plastic and strip paint from • Use ONLY pressure washer safe detergents/soa
Inhaltszusammenfassung zur Seite Nr. 16
8. Allow detergent to "soak in" for 3-5 minutes before Cleaning Detergent Siphoning Tube washing and rinsing. Reapply as needed to prevent If you used the detergent siphoning tube, you must flush it surface from drying. DO NOT allow detergent to dry on with clean water before stopping the engine. (prevents streaking). 1. Engage trigger lock on spray gun. IMPORTANT: You must flush the detergent siphoning 2. Remove high pressure spray tip from nozzle extension. system after each use by placing the
Inhaltszusammenfassung zur Seite Nr. 17
Maintenance Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below. Maintenance Schedule - Fill in Dates as You Complete Regular Service Maintenance Task Service Dates Service Dates Every 25 Every 50 Every 100 Every 250 Before Hours or Hours or Hours or Hours or Each Use Yearly Yearly Yearly Yearly Pressure Washer 1 Check/clean water inlet screen X Check high pressure hose X Check de
Inhaltszusammenfassung zur Seite Nr. 18
General Recommendations Pressure Washer Maintenance Regular maintenance will improve the performance and Clean Debris extend the life of the pressure washer. See any Briggs & Daily or before use, clean accumulated debris from cleaning Stratton Authorized Dealer for service. system. Keep linkage, spring and controls clean. Keep area The pressure washer’s warranty does not cover items that around and behind muffler free from any combustible debris. have been subjected to operator abuse or negligen
Inhaltszusammenfassung zur Seite Nr. 19
Nozzle Maintenance O-Ring Maintenance A pulsing sensation felt while squeezing the spray gun Purchase an O-Ring/Maintenance Kit, model 6048, by trigger may be caused by excessive pump pressure. The contacting the nearest Briggs & Stratton Authorized Dealer. principal cause of excessive pump pressure is a spray tip It is not included with the pressure washer. This kit includes clogged or restricted with foreign materials, such as dirt, etc. replacement o-rings, rubber washer and water inlet filte
Inhaltszusammenfassung zur Seite Nr. 20
* Below 40°F (4°C) the use of SAE 30 will result in hard starting. Changing Engine Oil ** Above 80°F (27°C) the use of 10W30 may cause increased oil Change the oil after the first 5 hours of operation. Change oil consumption. Check oil level more frequently. every 50 hours thereafter. If you are using your pressure washer under extremely dirty or dusty conditions, or in NOTE: Synthetic oil meeting ILSAC GF-2, API extremely hot weather, change the oil more often. certification mark and API servic
