Inhaltszusammenfassung zur Seite Nr. 1
PRESSURE WASHER
OWNERS MANUAL
for
Model 2225CWH
Read Owner's Manual. Do not operate equipment until you
have read Owners Manual for Safety, Assembly, Operation,
Maintenance and Storage Instructions.
This product is not equipped with a spark arresting muffler. If the product will be used around
flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or
other similar items, then an approved spark arrester must be installed and is legally require
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Table of Contents ................................................... 2 Assembly ................................................................ 7 Owner's Responsibilities......................................... 2 Operation ................................................................ 8 Pressure Washer Return Policy ............................. 2 Maintenance ......................................................... 14 Warranty.............................................
Inhaltszusammenfassung zur Seite Nr. 3
WARRANTY LIMITED WARRANTY ONE YEAR FROM DATE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company Manufacturing is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user). Products covered under this warranty include: air compressors, *air tools, accessories, service parts, pressure washers, and generators used in consumer applications (i.e., personal residential household
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING. HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT • Spilled gasoline and it’s vapors can become • Shut off engine and allow it to cool before DANGER ignited from cigarette sparks, electrical adding fuel to the tank. arcing, exhaust gases, and hot engine • Use care in filling tank to avoid spilling fuel
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS WHAT CAN HAPPEN HOW TO PREVENT IT HAZARD • Spray directed at electrical outlets or • Unplug any electrically operated product WARNING switches, or objects connected to an before attempting to clean it. Direct spray electrical circuit, could result in a fatal away from electric outlets and switches. RISK OF electrical shock. ELECTRICAL SHOCK • Your washer operates at fluid pressures • Never place hands in front of nozzle. WARNING and velocities high enough to penetra
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS OF CARTON Spanish English Instructional Owner's Owner's Video Manual Manual Handle Engine Manual Nozzle Cleaning Kit Handle Knobs Bagged Parts Bagged Handle Spray Gun Multi-Reg Wand 30 Weight Chemical Hose Engine Frame and High Pressure Hose Engine Oil Wheel Assembly 6 — ENG
Inhaltszusammenfassung zur Seite Nr. 7
UNPACKING 1. Open carton. 2. Remove plastic bag containing handle and engine manual supplied by engine manufacturer. Knobs 3. Remove cardboard from top of unit and inner cardboard from around unit. 4. Remove plastic bag containing two knobs, nozzle cleaning kit, instructional video, English Owner's Manual, and Spanish Owner's Manual from carton. 5. Remove spray gun, multi-reg wand, and bottle of engine oil from carton. 6. Using box cutting tool, cut the four corners of the shipping carton from t
Inhaltszusammenfassung zur Seite Nr. 8
PRESSURE WASHER BASICS NOTE: Become familiar with the controls and features described on these pages before operating your unit. Spray Gun Gun/ Detachable Hose Handle for Holder Storage Choke Spark Plug Air Control 3/8" X 25 ft. High Cleaner Throttle Pressure Hose Control Fuel Lever Filler Cap Multi-Reg Wand Recoil Starter Starter Grip 5 HP Honda Engine Nozzle Airless Knobby Tires DAPC High Pressure Thermal Chemical Pump Relief Hose With Heavy Duty Valve Filter Steel Frame BASIC ELEMENTS OF A P
Inhaltszusammenfassung zur Seite Nr. 9
OPERATION If pressure washer is operated without an adequate PRESSURE WASHER TERMINOLOGY water supply or operated for more than two (2) min- PSI: Pounds per Square Inch. The unit of measure for utes without depressing the spray gun trigger, the water pressure. Also used for air pressure, hydraulic pump will overheat and be seriously damaged. Any pressure, etc. damage to pump due to these causes will not be GPM: Gallons Per Minute. The unit of measure for the covered under warranty. flow rat
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION For low pressure operation, extend the nozzle of the multi-reg wand as shown. RISK OF INJECTION OR INJURY TO PERSON. DO NOT DIRECT DISCHARGE Multi-Reg (Low Pressure Setting) STREAM TOWARD PERSONS. WHEN USING THE HIGH PRESSURE SET- TING, DO NOT ALLOW THE JET-LIKE SPRAY TO COME IN CONTACT WITH UNPROTECTED SKIN, EYES, OR WITH ANY PETS OR ANIMALS. SERIOUS INJURY CAN OCCUR. HOW TO USE WAND Your pressure washer is equipped with a multi-reg HOW TO SIPHON CHEMICALS/CLEANING wand with both hi
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION 6. Attach other end of high pressure hose to quick BEFORE STARTING connect fitting on pump as shown. 1. Move pressure washer to level ground. 2. Check engine oil level. Refer to engine manufacturer's manual for procedure. NOTE The engine on this pressure washer is equipped with a low oil sensor. The amount of oil in the engine must be correct or the engine will not start. 3. Verify that filter screen is in water inlet of pump, as 7. Make sure high pressure hose and water su
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION Choke Control NEVER FILL FUEL TANK COMPLETELY. FILL TANK TO 1/2" BELOW BOTTOM OF FILLER NECK TO PROVIDE SPACE FOR FUEL EX- PANSION. WIPE ANY FUEL SPILLAGE FROM OPEN ENGINE AND EQUIPMENT BEFORE START- ING ENGINE. CLOSED TYPICAL HOOK-UP Your pressure washer hookup should resemble this 2. Move throttle control lever out of SLOW position, diagram. about 1/3 of the way toward FAST position. Throttle Control Pressure Washer Chemical Wand Chemical Hose FAST Garden Hose Hi- Pressure Hose SLO
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION Throttle Control WHEN USING THE HIGH PRESSURE FAST SETTING, DO NOT ALLOW THE HIGH PRESSURE SPRAY TO COME IN CONTACT WITH UNPROTECTED SKIN, EYES, OR WITH ANY PETS OR ANIMALS. SERIOUS SLOW INJURY CAN OCCUR. STOP 4. Turn off water supply. DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for Never turn water supply off while pressure more than two minutes internal componen
Inhaltszusammenfassung zur Seite Nr. 14
MAINTENANCE WHEN DOING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES, WATER PRESSURE, MOVING PARTS, OR FIRE RESULTING IN DEATH. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE, LET ENGINE COOL AND RELEASE ALL WATER PRES- SURE. THE ENGINE CONTAINS FLAMMABLE FUEL. DO NOT SMOKE OR WORK NEAR OPEN FLAMES WHILE PERFORMING MAINTENANCE. To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. The fol
Inhaltszusammenfassung zur Seite Nr. 15
MAINTENANCE HOW TO CLEAN THE WATER INLET FILTER This screen filter should be checked periodically and cleaned if necessary. 1. Remove filter by grasping the end and removing it from water inlet of pump. 2. Clean filter by flushing with water on both sides. screen 3. Install filter into water inlet of pump. filter STORAGE PREPARATION FOR STORAGE It is recommended that you follow these steps to protect the internal seals of the pressure washer when Use only RV antifreeze. Any other antifreeze
Inhaltszusammenfassung zur Seite Nr. 16
TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine will not start 1. Add fuel. 1. No fuel. (see Engine Manual for 2. Low oil (if oil-alert equipped). 2. Add required amount of oil. further engine trouble- 3. Squeeze gun trigger to relieve pres- 3. Pressure buildup after initial shooting) use. sure. 4. Push primer bulb 3 times or choke 4. Not primed or choked. engine. 5. Attach spark plug wire. 5. Spark plug wire not attached. 6. Engine ON/OFF switch in OFF 6. Place engine ON/OFF switch to ON positi
Inhaltszusammenfassung zur Seite Nr. 17
REPAIR PARTS 4 10 3 1 5 8 2 9 10 7 6 11 1 * Honda Engine Model Number GC-160 2 ^ DAPC- Horizontal Pump 3 16254 High Pressure Hose 4 16496 Trigger Gun 5 H133 Wand 6 NCT001 Nozzle Cleaning Kit 7 H140 Chemical Hose 8 X003 Tire 9 F464 Pal Nut 10 17367 Hand Grips 11 16371 Foot * Contact your local engine dealer for parts and service. ^ Contact an Authorized Warranty Service Center near you, call 1-800-888-2468, Ext. 2,1 17 — ENG
Inhaltszusammenfassung zur Seite Nr. 18
NOTES 18 — ENG
Inhaltszusammenfassung zur Seite Nr. 19
NOTES 19 — ENG
Inhaltszusammenfassung zur Seite Nr. 20
QUICK FACTS Pressure Washer Quick Facts CALL 1-800-888-2468 EXT. 2,1 TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES. Use fresh high quality gas. GAS Add stabilizer to fuel tank and run engine for 5 minutes before storage. Pump oil: Refer to owners manual supplied with this unit. Engine oil: Refer to engine manual supplied with this unit. OIL Some units are equipped with a low oil sensor and adequate oil must be added or the unit will not start. Use on
