Inhaltszusammenfassung zur Seite Nr. 1
TITAN 250
Turbomachinery Package Specification
Oil & Gas and Power Generation Applications
Generator Set
Inhaltszusammenfassung zur Seite Nr. 2
TURBOMACHINERY PACKAGE SPECIFICATION TM Titan 250 Generator Set Solar Turbines Incorporated P.O. Box 85376 San Diego, CA 92186-5376 Caterpillar is a trademark of Caterpillar Inc. Solar, Titan, SoLoNOx, and Turbotronic are trademarks of Solar Turbines Incorporated. All other trademarks, service marks, or registered trademarks appearing in this specification are the intellectual property of their respective companies. Spe
Inhaltszusammenfassung zur Seite Nr. 3
Turbomachinery Package Specification Titan 250 Generator Set Table of Contents 1 INTRODUCTION........................................................................................................................5 1.1 General Description ..........................................................................................................5 1.2 Overview ...........................................................................................................................5 2
Inhaltszusammenfassung zur Seite Nr. 4
Turbomachinery Package Specification Titan 250 Generator Set 15 MARINIZATION.......................................................................................................................61 15.1 General Description ........................................................................................................61 16 QUALITY ASSURANCE AND TESTING................................................................................63 16.1 Quality Assurance.............................
Inhaltszusammenfassung zur Seite Nr. 5
Turbomachinery Package Specification Titan 250 Generator Set Table of Figures Figure 1. Typical Titan 250 Gas Turbine Generator Set.............................................................6 Figure 2. Typical Titan 250 Generator Set Service Connections (Driver Skid) ..........................8 Figure 3. Titan 250 Two-Shaft Gas Turbine Cutaway ..............................................................10 Figure 4. Typical Combustion Process ...........................................
Inhaltszusammenfassung zur Seite Nr. 6
Turbomachinery Package Specification Titan 250 Generator Set 1 Introduction 1.1 General Description Solar Turbines Incorporated is a worldwide leader in the design, manufacture, and installation of industrial gas turbines. Solar's 40 years of experience integrating high technology with fluid compression, liquid pumping, power generation, and cogeneration applications has resulted in more than 12,500 gas turbine installations in 92 countries around the world. Solar gas turbine packages hav
Inhaltszusammenfassung zur Seite Nr. 7
Turbomachinery Package Specification Titan 250 Generator Set 2 Titan 250 Gas Turbine Generator Set 2.1 General Description The Titan 250 gas turbine generator set (Figure 1) is a completely integrated and fully operational package equipped with all accessories and auxiliary systems required for operation. In addition to the standard package features, a wide array of optional equipment is available to meet the customer’s installation and operation requirements. Designed specifically for in
Inhaltszusammenfassung zur Seite Nr. 8
Turbomachinery Package Specification Titan 250 Generator Set • Fuel system • Lubricating oil system • Turbotronic™ 4 Control System • Onskid electrical wiring • Skid with drip pans • Piping and manifolds • Ancillary air inlet system • Ancillary exhaust system • Package enclosure (if specified) with: − Ventilation system − Fire detection and suppression system − Combustible gas detection system 2.3.1 Package Electrical System The onskid package electrical system can be furnished to
Inhaltszusammenfassung zur Seite Nr. 9
Turbomachinery Package Specification Titan 250 Generator Set Figure 2. Typical Titan 250 Generator Set Service Connections (Driver Skid) Table 1. Package Specifications Dimensions Approximate Package Measurements Height, Unenclosed 3.89 m (12 ft 9 in.) Height, Enclosed 4.12 m (13 ft. 6 in.) Width (to skid edges) 3.37 m (11 ft 1 in.) Width (including lifting bollards) 3.60 m (11 ft 10 in.) Length, Engine Skid 10.29 m (33 ft 9 in.) Length, Generator Skid Approximate Packag
Inhaltszusammenfassung zur Seite Nr. 10
Turbomachinery Package Specification Titan 250 Generator Set Construction Materials Piping, Manifolds, and Tubing < 10.2 cm (4 in.) 316L Stainless Steel (Unless Otherwise Specified) Note (a) Piping, Manifolds, and Tubing > 10.2 cm (4 in.) Carbon Steel (Unless Otherwise Specified) Note (a) Piping Interface Connections 316L Stainless Steel (Unless Otherwise Specified) Flange Assembly Hardware 316L Stainless Steel Pipe Support Brackets Carbon Steel (Standard) 316L Stainless Steel (Opti
Inhaltszusammenfassung zur Seite Nr. 11
Turbomachinery Package Specification Titan 250 Generator Set 3 Titan 250 Gas Turbine 3.1 General Description The two-shaft Titan 250 gas turbine (Figure 3) is a completely integrated and self- contained prime mover. The Titan 250 gas turbine combines high performance operation with rugged industrial construction. This design philosophy allows for high efficiency, low maintenance, and a long service life. The Titan 250 gas turbine is designed for a high degree of compliance with American
Inhaltszusammenfassung zur Seite Nr. 12
Turbomachinery Package Specification Titan 250 Generator Set For combustion, the gas turbine requires approximately one-fourth of the total air it compresses. The excess air is mixed with the combustion products to reduce the gas temperature at the turbine first stage-inlet. The cooling air also keeps metal temperatures in the combustor and turbine assembly relatively low to ensure a long service life. Figure 4. Typical Combustion Process 3.1.2 SoLoNOx Combustion System The Titan 25
Inhaltszusammenfassung zur Seite Nr. 13
Turbomachinery Package Specification Titan 250 Generator Set Construction Materials Compressor Case - Forward Section Nodular Iron - Aft Section WC6 Alloy Steel Combustor Case 410 Stainless Steel Exhaust Diffuser Nodular Iron Accessory Gear Housing Ductile Iron Protective Coatings Compressor Rotor and Stator Blades Inorganic Aluminum Nozzles, First and Second Stage Precious Metal Diffusion Aluminide Blades, First and Second Stage Precious Metal Diffusion Aluminide Approximate Weight
Inhaltszusammenfassung zur Seite Nr. 14
Turbomachinery Package Specification Titan 250 Generator Set 4 Reduction-Drive Gearbox 4.1 General Description The reduction-drive gearbox (Figure 5) is an industrial, epicyclic, star-gear design selected specifically for generator set applications. The gearbox uses few moving parts, which provides high reliability and ease of assembly and disassembly. The reduction gearbox is designed for continuous-duty operation and reduces the output speed of the turbine to the required operating spee
Inhaltszusammenfassung zur Seite Nr. 15
Turbomachinery Package Specification Titan 250 Generator Set 5 Generator and Associated Equipment 5.1 General Description For maximum flexibility, the gas turbine package can be provided with several different generator types and voltage outputs to accommodate a broad range of application requirements. The generator, exciter, and control system are integrated to provide optimal performance. The standard generator type supplied is open drip-proof (ODP) (Figure 6). However the following ot
Inhaltszusammenfassung zur Seite Nr. 16
Turbomachinery Package Specification Titan 250 Generator Set Any variations in bus potential will also be sensed and corrected by this circuit. After voltage builds, the generator accelerates to 100% speed and excitation and voltage control is assumed by the CGCM. A crosscurrent-compensating transformer provides the signal to the CGCM for reactive loadsharing between multiple paralleled units. It should be noted that the generator rotor windings rotate and the generator armature is station
Inhaltszusammenfassung zur Seite Nr. 17
Turbomachinery Package Specification Titan 250 Generator Set armature and a three-phase, full-wave, diode-type bridge rectifier that rotates with the armature. The pilot exciter is a PMG that rotates with the main generator rotor shaft. It feeds the exciter field windings with excitation current and is controlled by the CGCM. 5.2.7 Bearing Lubrication System The generator is supplied with a force-fed bearing lubrication system consisting of onskid piping and a filter strainer. Oil is suppl
Inhaltszusammenfassung zur Seite Nr. 18
Turbomachinery Package Specification Titan 250 Generator Set 6 Start System 6.1 General Description The start system includes a direct-drive AC starter motor driven by a solid-state variable frequency drive (VFD). The start system provides torque to initiate engine rotation and to assist the engine in reaching a self-sustaining speed. The starter motor is mounted directly on the gas turbine accessory drive gearbox. The VFD regulates voltage and frequency to the starter motor for engine ro
Inhaltszusammenfassung zur Seite Nr. 19
Turbomachinery Package Specification Titan 250 Generator Set 6.2.2 Variable Frequency Drive The VFD (Figure 7) is a motor speed controller that provides pulse-width modulated power with variable frequency and voltage to the starter motor. Controlled by the Turbotronic 4 control system, the VFD regulates voltage and frequency to the starter motor to control engine speed from standstill to starter dropout speed. The system is capable of performing up to six start attempts per hour, as well a
Inhaltszusammenfassung zur Seite Nr. 20
Turbomachinery Package Specification Titan 250 Generator Set Table 4. Start System Specifications Variable Frequency Drive Optional Voltage Input Ranges See Note (a) 380 to 460 VAC, (48 to 62 Hz) 500 to 600 VAC, (48 to 62 Hz) Minimum Input Current - 380 to 460 VAC Input 525 amps - 500 to 600 VAC Input 342 amps Voltage Output Range 0 to 460 VAC, (0 to 240 Hz) Maximum Line Distribution Capacity 1000 kVa Maximum Fault Current Capacity See Note (b) 30 000 amps Maximum Breakaway Amperage
