Inhaltszusammenfassung zur Seite Nr. 1
Table of contents
Getting started 4 Conference call 16
Parts checklist 4 Find Handset 16
Installation 5 Voice mail service 16
Choose location 5 Telephone directory 17
Inst
Inhaltszusammenfassung zur Seite Nr. 2
Table of contents Additional information 29 Troubleshooting 29 Maintenance 35 Warranty 35 Important safety instructions 37 FCC, ACTA and IC regulations 38 ® The RBRC Seal 39 Technical specifications 40 Index
Inhaltszusammenfassung zur Seite Nr. 3
NEED HELP? This manual has all the feature operations and troubleshooting you need to install and operate your new VTech telephone Please take the time to review thoroughly to ensure proper installation of this VTech innovative and feature rich product You can also visit our website at www vtechphones com for support, shopping, and everything new at VTech In Canada, please visit www vtechcanada com VTech toll free 1-800-595-9511 In Canada dial 1-800-267-7377
Inhaltszusammenfassung zur Seite Nr. 4
Getting started Parts checklist: 1 Base unit • Before using 2 Handsets (2) this telephone, Charger power adaptor you must read 3 Charger power adaptor Important 4 Charger safety 5 Telephone line cord instructions on 6 Wall mount bracket page 37 7 Belt clips (2) Base unit Handsets (2) Charger 8 Base power adaptor 9 Battery packs (2) 10 User’s manual 11 Quick Start Guide Telephone line cord Wall mount To p
Inhaltszusammenfassung zur Seite Nr. 5
Getting started Installation Choose location Install handset battery For maximum performance of your 1 Align the two holes in the plug with the socket pins, matching cordless telephone system: • Use only the the red and the black connectors, then snap the plug provided VTech 1 Choose a central location for your into place battery, or base unit 2 Place the battery in the compartment with the wires in equivalent 2 Install your phone(s) as far away as the upper right corner possi
Inhaltszusammenfassung zur Seite Nr. 6
Installation Connect power to base unit/chargers 1 Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector • C onnect the power into the bottom of the base unit and telephone 2 Choose the location for your charger, and plug its power supply into an electrical outlet line cords to the underside of the base as illustrated To telephone outlet To power outlet • P lug the AC adaptor into an electrical outlet If the battery has not been charge
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Installation Check battery indicator When the handset displays WARNING CHECK BATTERY, it indicates one of the following: 1 There is no battery in your handset You need to install the supplied battery into your handset (see Install handset battery on page 5 ) 2 The battery needs to be replaced 3 The battery has been installed incorrectly Please reinstall (see Install handset battery) and/or see the diagram in the battery compartment of the handset Check for dial tone Afte
Inhaltszusammenfassung zur Seite Nr. 8
Installation If you subscribe to DSL service If you hear interference during conversations, and/or your caller ID features are not functioning properly, and you subscribe to DSL service from your telephone company, install a noise filter to • If the phone will not be used for the telephone line between the base unit and the telephone line jack Contact your DSL provider to a long period of obtain a noise filter. time, remove the battery pack to prevent possible leakage Telephone Nois
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Wall mounting (optional) The wall mount brackets are designed for use on standard wall mount plates only 1 Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit Then plug the adaptor into an electrical outlet. 2 Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to the wall jack 3 Line up the tabs on the wall mount adaptors with the holes at the bottom of the base unit/back of the cha
Inhaltszusammenfassung zur Seite Nr. 10
Handset layout 1 Earpiece 2 Headset jack (2 5mm) 3 Caller ID (scroll down) 4. Talk/flash 5 Dialing keys (0-9, *, #) 6 Redial/pause 7 Speaker 8 LCD display 9 Directory (scroll up) 10 Volume control 11 Select/menu 12 Off/clear 13 Intercom 14 Mute/remove 10 www vtechphones com
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Base unit layout 1 Find handset 2 Charge 3 In use 4 Voice mail 5 Power connector jack 6 Telephone jack www vtechphones com 11
Inhaltszusammenfassung zur Seite Nr. 12
Basic operation Handset icons Icon Description MUTE • On when the microphone is muted, see page 14 NEW • On when there are new calls in the call log, see page 22 • On when the handset ringer is muted, see page 25 • Low battery or charging indicator, see page 8 Handset LEDs Icon Description • On when handset speakerphone is in use Base LEDs Icon Description IN USE • On when the phone is on a call • Flashes when an extension phone is on a call CHARGE • On when handset is positioned so
Inhaltszusammenfassung zur Seite Nr. 13
Basic operation Handset operation Making calls • Press (or SPEAKER) to use the handset speakerphone feature), • The procedure then dial the phone number to change -OR- the volume is Dial the phone number first, then press (or SPEAKER) the same for • Press OFF to end your call or place the handset in its base or the handset charger earpiece, speakerphone Answering calls and headset • Press , SPEAKER or any dialing keys • Use to access phone • Press OFF to end your call or place
Inhaltszusammenfassung zur Seite Nr. 14
Handset operation • Press or SPEAKER to dial the displayed number • Press MUTE/REMOVE to delete the displayed number You’ll hear a confirmation beep. • To exit the redial review list, Press OFF. PHONE 00:00:15 Mute MUTED • During a call, press the MUTE/REMOVE key to disable the microphone The other person on the call will not be able to hear MUTE you The screen will display MUTED briefly: PHONE 00:00:15 • Press MUTE/REMOVE again to return to normal two-way MICROPHONE ON conversation
Inhaltszusammenfassung zur Seite Nr. 15
Basic operation Handset operation Intercom (continued) INTERCOM ENDED • Press INT, OFF, or place HS1 or HS2 back in the base or charger to end the call If HS2 is out of range, the screen on HS1 will show NO SIGNAL CALL ENDED If HS2 is off, in use or out of range, HS1 will show UNABLE TO CALL TRY AGAIN UNABLE TO CALL TRY AGAIN Call forward An external call can be forwarded or transferred from the originating handset (HS1) to the destination handset (HS2) • While HS1 is on an external cal
Inhaltszusammenfassung zur Seite Nr. 16
Handset operation Call transfer • The originating handset (HS1) can transfer an external call to another handset (HS2) by pressing INT The external call is put on hold and the screen will display CALLING OTHER HANDSET • For the FIND HANDSET • HS2 will ring and display OTHER HANDSET IS CALLING function to work, • HS2 can pick up the transferred call by pressing TALK/FLASH the system • An intercom call is established between HS1 and HS2 and they can discuss the call prior to the handse
Inhaltszusammenfassung zur Seite Nr. 17
Basic operation Telephone directory Your phone can store up to 50 numbers with names in the directory Each directory location can hold up to 32 digits for the number and 16 characters for the name Only one handset can access the directory at a time NOT AVAILABLE AT THIS TIME will be displayed if you try to access the • All handsets directory when another handset is already using the directory share a common directory which is stored in the Store a new entry base Entries >STORE • Press
Inhaltszusammenfassung zur Seite Nr. 18
Telephone directory Characters by number Pressing any particular key causes different characters to be displayed in the following order: • If you wish to store a number Characters by number of key presses from redial Key memory into the 1 2 3 4 5 6 7 8 9 directory, press REDIAL/PAUSE 1 # ‘ , - & 1 then or A B C 2 a b c 2 to scroll to the desired redial D E F 3 d e f 3 number from G H I 4 g h i memory Press 4 SEL J K L 5 j k l 5 M N O 6 m n o 6 P Q R S 7 p q r s 7 T U V
Inhaltszusammenfassung zur Seite Nr. 19
Basic operation Telephone directory Review/dial from the directory >DIRECTORY • Press MENU, when DIRECTORY is displayed, press SEL With CALL LOG REVIEW in the first line, press SEL • When reviewing the phonebook, - OR - the second line With the handset in idle, press to enter the directory review mode of the display The first directory entry will be displayed. will show the number, up to 16 digits For • Scroll through the directory entries using and or enter the first
Inhaltszusammenfassung zur Seite Nr. 20
Telephone directory • Press SEL EDIT NAME • Press MUTE/REMOVE to backspace and use the digit keys to VTech Com_ enter the correct name • Press SEL. You’ll hear a confirmation tone. Delete a directory entry • Follow the steps in Review/dial from the directory (page 19) to reach the entry to be deleted • Press MUTE/REMOVE to delete the entry. A confirmation tone will sound • The handset will then advance to the next entry, if any 20 www vtechphones com
