Inhaltszusammenfassung zur Seite Nr. 1
FREEZER
ZU 7120 F
INSTRUCTION BOOKLET
2222739-84
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Instructions for the User Instructions for the Installer Important Safety Instructions 3 Technical Specifications 14 Description of the Appliance 4 Installation 14 Positioning 14 Operation 4 Before use 4 Electrical Connection 15 Freezer controls 4 Starting your appliance 5 Building-in instructions 16 Temperature control 5 Grid preparation 16 Warning light (red) 5 Right door opening 16 Acoustic alarm 5 Left door opening 16 Freezing fresh food 5 Door reversal 16 Frozen food storage 5 Buil
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation n Containers with flammable gases or liquids can n Check the appliance for transport damage. Under leak at low temperatures. Do not store any con- no circumstance shoul
Inhaltszusammenfassung zur Seite Nr. 4
DESCRIPTION OF THE APPLIANCE Freezer calendar (recommended storage times for frozen foods) Air outlet duct ` ¯ Freezer controls ´ Air inlet filter ˆ ¯ Comparments for storing frozen food ˜ Compartment for freezing fresh food ¯ ˜ ˜ ˆ ´ ` OPERATION Before use Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry thoroughly. Freezer controls 6 1 5 2 4 3 `ˆ´ ˜¯
Inhaltszusammenfassung zur Seite Nr. 5
Starting your appliance Freezing fresh food Insert the plug into the wall socket. The appliance In any 24 hour period you can freeze up to 20 kg of can be activated/deactivated by pressing the fresh food. ON/OFF button .The pilot light will light up to Activate fast freeze by depressing the fast freeze ¯ ˜ show that the appliance is on. switch 24 hours before you want to freeze your ` fresh food, the yellow light illuminates. This time ´ can be shortened, depending on the quantity of food Tempe
Inhaltszusammenfassung zur Seite Nr. 6
Important Thawing In the event of a power failure causing the Frozen food, prior to being used, can be thawed in temperature within your freezer to rise, do the fridge or at room temperature depending on the not re-freeze the food without checking its time available. Small food items may even be condition. cooked from frozen; in this case cooking will take The following guidelines should assist you: longer. Ice-cream: once thawed should be discarded. Any frozen food which is allowed to thaw acci
Inhaltszusammenfassung zur Seite Nr. 7
DEFROSTING The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thick- ness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs. However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out and it is advisable to carry out this operation when the appliance is empty. To carry out comple
Inhaltszusammenfassung zur Seite Nr. 8
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POW- DERS, HIGHLY PERFUMED CLEANING PROD- UCTS OR WAX POLISHES, TO CLEAN THE INTERI- OR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG SMELL. Clean the drain hole of the water troug
Inhaltszusammenfassung zur Seite Nr. 9
SOMETHING NOT WORKING? Before contacting your local Service Force Centre check the following points. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom Solution No power to appliance - Check there is power at the socket. - Check there is not a power cut by checking the household lights. - Check the fuse has not blown. The temperature in the freezer i
Inhaltszusammenfassung zur Seite Nr. 10
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if Before calling out an engineer, please ensure you you wish to purchase spare parts, please contact your have read the details under the heading ‘Something local Zanussi Service Force Centre by telephoning:- Not Working’. When you contact the Service Centre you will need 08705 929929 to give the following details. 1. Your name, address and post code Your telephone call will be automatically routed to the 2. Your telep
Inhaltszusammenfassung zur Seite Nr. 11
11
Inhaltszusammenfassung zur Seite Nr. 12
12
Inhaltszusammenfassung zur Seite Nr. 13
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: n The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. n The appliance has been
Inhaltszusammenfassung zur Seite Nr. 14
TECHNICAL SPECIFICATIONS DIMENSIONS Height 81,5 cm Width 56 cm Depth 53,8 cm POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 120 W AVERAGE DAILY UNITS ELECTRICITY (*) 0,90 kWh GROSS CAPACITY 95 l NET CAPACITY 86 l STAR RATING (*)This figure is based on standard test results in accordance with European Standard EN153. Actual con- sumption will depend on how the appliance is used and where it is located. INSTALLATION Positioning For this appliance to work efficiently, it
Inhaltszusammenfassung zur Seite Nr. 15
ELECTRICAL CONNECTION This appliance complies with the E.E.C. Directive WARNING: No. 87/308 of 2.6.87 relative to radio interference THIS APPLIANCE MUST BE EARTHED. suppression. The manufacturer declines any liability should this safety measure not be This appliance complies with the following observed. E.E.C. Directive: - 73/23 EEC of 19.2.73 (Low Voltage Directive) If the plug that is fitted to your appliance is not suit- and subsequent amendments. able for your socket outlet, it must be cut
Inhaltszusammenfassung zur Seite Nr. 16
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation a Remove the grid from the appliance pulling it towards you with hands. Right door opening: a Remove the left side (A) of the grid cutting it from the rear (see figure, a). S.I.001 Left door opening: Remove the right side (B) of the grid cutting it from the rear (see figure, b). To reposition the grid on the appliance proceed as fol- a A lows: Apply the grid to the base of the appliance
Inhaltszusammenfassung zur Seite Nr. 17
600 550 Building the appliance in unter a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. The appliance could be inserted between two units (a) or as an end unit (b). a b S.I.004 The plug socket necessary for connection of the appli- ance to the electricity supply should be positioned, so that the plug is not placed in the recess. S.I.005 Fasten the side panel to the rear of the appliance with SUPER. INFER. the fixing brackets. D326 F
Inhaltszusammenfassung zur Seite Nr. 18
50mm 20mm The appliance is equipped with adjustable support feet. To adapt the appliance to the height of the instal- lation area (max 870 mm), screw in, or screw out the feet situated to the four bottom corners. S.I.006 Separate parts A, B, C, D as shown in the figure. B A C D PR266 Place guide (A) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied. A PR166 Fix c
Inhaltszusammenfassung zur Seite Nr. 19
25 ÷ 80 Should the lining up of the furniture door be neces- sary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly. PR168 Fix cover (D) on guide (B) until it clips into place. B D PR167/1 Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. S.I.007 n For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth
Inhaltszusammenfassung zur Seite Nr. 20
© Electrolux Household Appliances Limited 2000