Bedienungsanleitung England's Stove Works 55SHP22

Inhaltszusammenfassung zur Seite Nr. 1

Pellet Stoves


Wood Stoves

Gas Stoves


Multi-Fuel Stoves


P.O. Box 206 Monroe, VA 24574 www.englanderstoves.com Phone: (800) 516-3636 Fax: (434) 929-4810

Installing the PU-DTSTAT

BEFORE BEGINNING THERMOSTAT INSTALLATION BE CERTAIN
THE STOVE IS UNPLUGGED AND COMPLETELY COOL. DEPENDING
ON WHICH STOVE THE THERMOSTAT IS BEING INSTALLED ON,
THE CONTROL BOARD MAY NEED TO BE REMOVED FOR
INSTALLATION.

1. Using a sm

Inhaltszusammenfassung zur Seite Nr. 2

3. Pull the two halves of the thermostat apart so that the interior of the thermostat is visible. Install one thermostat wire into the “G” terminal of the thermostat and the other wire into the “W” terminal (it does not matter which wire color is installed at each terminal). Use the previously mentioned jeweler’s screwdriver to tighten the retaining screws and tightly secure the wires into the thermostat. Connect one thermostat wire “G” terminal.” Connect one thermostat w

Inhaltszusammenfassung zur Seite Nr. 3

6. Consult the Owner’s Manual of your stove (and see the chart below) for more details on how the thermostat works with your control board to manage heat output and fuel usage. Stove  Thermostat Function  Stove  Thermostat Function  Thermostat puts stove into idle  Thermostat puts stove into idle  25‐PDV  10‐CDV  mode when the call for heat is  mode when the call for heat is  55‐SHP22  49‐SHC22  gone (control board does not  gone (control board does not  55‐TRP22  49‐TRC22  indicate change)