Inhaltszusammenfassung zur Seite Nr. 1
D DO NOT O NOT
D DISCARD ISCARD
Owner’s Manual
Installation and Operation
Model(s):
NDV3630, NDV3933, NDV4236, NDV4842,
NDV3630I, NDV3933I, NDV4236I, NDV4842I,
NDV3630L, NDV3933L, NDV4236L, NDV4842L,
NDV3036IL, NDV3933IL, NDV4236IL, NDV4842IL
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
WARN
Inhaltszusammenfassung zur Seite Nr. 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This Owner’s Manual should be retained for future reference. A. Congratulations We suggest that you keep it with your other important Congratulations on selecting a Heatilator gas fi replace, an documents and product manuals. elegant and clean alternative to wood burning fi replaces. The information contained in this Owner’s Manual, unless The Heatilator gas fi replace you h
Inhaltszusammenfassung zur Seite Nr. 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations 2 7 Vent Information and Diagrams B. Limited Lifetime
Inhaltszusammenfassung zur Seite Nr. 4
14 Appliance Setup A. Remove the Packaging 55 B. Open Front Screen Assembly 55 C. Remove the Shipping Materials 55 D. Remove Fixed Glass Assembly 55 E. Clean the Appliance 55 F. Accessories 55 G. Place the Rockwool 56 H. Place the Lava Rock 56 I. Place the Vermiculite 56 J. Remove Screen Protector 56 K. Unpackage the Hood & Floor Cover 57 L. Install Hood 57 M. Install Floor Cover 58 N. Fixed Glass Assembly 58 O. Close the Screen Assembly 58 P. Air Shutter Setting 59 15 Troubleshooting A. St
Inhaltszusammenfassung zur Seite Nr. 5
B. Limited Lifetime Warranty Gas Appliance (Fireplace) Limited Lifetime Warranty HEARTH & HOME TECHNOLOGIES INC. (“HHT”) extends the following warranty for HEATILATOR ® gas appliances installed in the United States of America or Canada (the "Appliance"). Dealers and employees of HHT have no authority to make any warranty or authorize any remedies in addition to or inconsistent with the terms of this warranty. Limited Lifetime Warranty HHT warrants the Appliance for component failure due to a
Inhaltszusammenfassung zur Seite Nr. 6
Listing and Code Approvals 1 1 A. Appliance Certifi cation C. BTU Specifi cations Novus NDV NDV3630 NDV3933 MODELS: NDV3630, NDV3933, NDV4236, NDV4842, Standing Pilot or IPI NDV3630I, NDV3933I, NDV4236I, NDV4842I, Max/Min Input Rate (NG) 20,000/14,000 22,000/15,000 NDV3630L, NDV3933L, NDV4236L, NDV4842L, Orifi ce Size (NG) 0.083 0.089/#43 NDV3630IL, NDV3933IL, NDV4236IL, NDV4842IL Max/Min Input Rate (LP) 20,000/15,000 22,000/15,000 LABORATORY: Underwriters Laboratories, Inc. (UL) Orifi ce S
Inhaltszusammenfassung zur Seite Nr. 7
Note: The following requirements reference various Massachusetts and national codes not contained in this document. G. Requirements for the Commonwealth of Massacusetts For all side wall horizontally vented gas fueled equipment serves carbon monoxide detectors and signage installed installed in every dwelling, building or structure used in in accordance with the provisions of 248 CMR 5.08(2)(a)1 whole or in part for residential purposes, including those through 4. owned or operated by th
Inhaltszusammenfassung zur Seite Nr. 8
User Guide Operating Instructions 2 2 • Install a switch lock or a wall/remote control with child A. Gas Fireplace Safety protection lockout feature. • Keep remote controls out of reach of children. WARNING • Never leave children alone near a hot fi replace, whether HOT SURFACES! operating or cooling down. Glass and other surfaces are hot during • Teach children to NEVER touch the fi replace. operation AND cool down. • Consider not using the fi replace when children will be Hot glass will c
Inhaltszusammenfassung zur Seite Nr. 9
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Fan Kit (optional) F. Fixed Glass Assembly • Refer to Figure 2.1 for location of control. See Section 14.K. D. Clear Space G. Remote Controls, Wall Controls and Wall WARNING! DO NOT place combustible objects in front of Switches the fi replace or block louvers. High temperatures may start Follow the instructions supplied with the control installed to a fi re. See Figure 2.2. operate your fi replace: Avoid placing candles and other heat-sensitive object
Inhaltszusammenfassung zur Seite Nr. 10
I. Intermittent Pilot Ignition (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. 10 Heatilator • Novus NDV Series • 4055-187 Rev F • 06/08 This appliance needs fresh air for safe operation and must be installed so there are provisions for FOR YOUR SAFETY READ BEFORE LIGHTING adequate combustion and ventilation air. WARNING: If you do not follow these instructions exac
Inhaltszusammenfassung zur Seite Nr. 11
PILOT ON PILOT OFF ON ON J. Standing Pilot Ignition Heatilator • Novus NDV Series • 4055-187 Rev F • 06/08 11 PILOT OFF This appliance needs fresh air for safe operation and must be installed so there are provisions for FOR YOUR SAFETY READ BEFORE LIGHTING adequate combustion and ventilation air. WARNING: If you do not follow these instructions exactly, a fire or This appliance must be installed in accordance with explosion may result causing property damage, personal local codes, if any;
Inhaltszusammenfassung zur Seite Nr. 12
K. After Appliance is Lit Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • Turn the appliance off and allow it to completely cool. • Remove and clean fi xed glass assembly. See Section 3. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during ap- pliance break-in. • Some people may be sensitive to smoke
Inhaltszusammenfassung zur Seite Nr. 13
Maintenance and Service 3 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be re- placed prior to operating the appliance. Frequency: Annually By: Homeowner When properly maintained, your appliance will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualifi ed technician. • Assess condition of screen and replace as necessary. • Inspect for scratches, dents or other dam
Inhaltszusammenfassung zur Seite Nr. 14
Tools needed: Protective gloves, vacuum cleaner, dust Venting cloths Frequency: Seasonally • Vacuum and wipe out dust, cobwebs, debris or pet hair. By: Homeowner Use caution when cleaning these areas. Screw tips that Tools needed: Protective gloves and safety glasses. have penetrated the sheet metal are sharp and should be avoided. • Inspect venting and termination cap for blockage or • Remove all foreign objects. obstruction such plants, bird nests, leaves, snow, debris, • Verify un
Inhaltszusammenfassung zur Seite Nr. 15
(Either cobrahead or SIT) Figure 3.1 IPI Flame Patterns Figure 3.2 Standing Pilot Flame Patterns Heatilator • Novus NDV Series • 4055-187 Rev F • 06/08 15 PRODUCT SPECIFIC
Inhaltszusammenfassung zur Seite Nr. 16
Installer Guide Getting Started 4 4 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual VERTICAL TERMINATION CAP (SECTION 10.F. ) NOTE: An installation will have either a vertical termination or a horizontal termination. It will not have both (as shown). NON-COMBUSTIBLE ROOF FLASHING MAINTAINS MINIMUM CLEARANCE AROUND
Inhaltszusammenfassung zur Seite Nr. 17
B. Design and Installation Considerations D. Inspect Appliance and Components Heatilator direct vent gas appliances are designed to oper- • Carefully remove the appliance and components from ate with all combustion air siphoned from outside of the the packaging. building and all exhaust gases expelled to the outside. No • The vent system components and decorative doors and additional outside air source is required. fronts may be shipped in separate packages. • If packaged separately, the lo
Inhaltszusammenfassung zur Seite Nr. 18
Framing and Clearances 5 5 NOTICE: Illustrations refl ect typical installations and are A. Select Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for your appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to hi
Inhaltszusammenfassung zur Seite Nr. 19
To further prevent drafts, the wall shield and ceiling fi re- B. Constructing the Appliance Chase stops should be caulked with high temperature caulk to A chase is a vertical box-like structure built to enclose the seal gaps. Gas line holes and other openings should be gas appliance and/or its vent system. In cooler climates the caulked with high temp caulk or stuffed with unfaced insu- vent should enclosed inside the chase. lation. If the appliance is being installed on a cement slab, a lay
Inhaltszusammenfassung zur Seite Nr. 20
D. Mantel and Wall Projections Mantel Legs or Wall Projections WARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as specifi ed. Framing or fi nishing Top of material closer than the minimums listed must be construct- Appliance ed entirely of noncombustible materials (i.e., steel studs, Drywall concrete board, etc). A Mantels B 30 in. minimum to ceiling Mantel Leg or Perpendicular Wall 18 17 16 16 15 15-1/4 A 1 in. (25 mm) min. 14 14-1/2 to perpendicular wall 13 13-
