Inhaltszusammenfassung zur Seite Nr. 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Model(s):
CB4236IR
CB4842IR
B-Vent Gas Appliance
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
WARNING
WARNING: If the information in these
HOT SURFACES!
instructions is not followed exactly, a fire
Glass and other surfaces are hot duri
Inhaltszusammenfassung zur Seite Nr. 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. A. Congratulations Congratulations on selecting a Heatilator gas fireplace, This owner’s manual should be retained for future reference. We suggest that you keep it with your other important an elegant and clean alternative to wood burning fire- documents and product manuals. places. The Heatilator gas fireplace you have selected is designed to provide the utmost in safety,
Inhaltszusammenfassung zur Seite Nr. 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations 2 7 Vent Information and Diagrams B. Warranty 5 A. Ve
Inhaltszusammenfassung zur Seite Nr. 4
15 Troubleshooting A. Intellifire Ignition System 32 16 Reference Materials A. Appliance Dimension Diagram 4 B. Service Parts List 5 C. Optional Components 8 D. Contact Information 40 = Contains updated information. 4 Heatilator • Caliber BV Series • 4040-262 • Rev M • 08/09
Inhaltszusammenfassung zur Seite Nr. 5
B. Warranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation within two years follow
Inhaltszusammenfassung zur Seite Nr. 6
B. Warranty (continued) WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is only valid while the HHT appliance remains at the site of original installation. • Contact your installing dealer for warranty service. If the installing dealer is unable to provide necessary parts, contact the nearest HHT authorized dealer or supp
Inhaltszusammenfassung zur Seite Nr. 7
Listing and Code Approvals 1 A. Appliance Certification C. BTU Specifications MODELS: CB4236IR, CB4842IR Caliber BV Series CB4236 CB4842 LABORATORY: Underwriters Laboratories, Inc. (UL) IPI TYPE: Vented Gas Fireplace Heater Max/Min Input Rate (NG) 0,000/20,000 ,000/22,000 Orifice Size (NG) . 0 i n./2.56 mm . 04 in./2.64 mm STANDARD: ANSI Z21.88b-2008/CSA 2.33b-2008 Max/Min Input Rate (LP) 29,500/ 9,500 2,500/20,000 Orifice Size (LP) .06 5 in./ .6 mm .065 in./ .65 mm NOTICE:
Inhaltszusammenfassung zur Seite Nr. 8
User Guide Operating Instructions 2 • Never leave children alone near a hot fireplace, whether A. Gas Fireplace Safety operating or cooling down. • Teach children to NEVER touch the fireplace. WARNING • Consider not using the fireplace when children will be HOT SURFACES! present. Glass and other surfaces are hot during Contact your dealer for more information, or visit: www. operation AND cool down. hpba.org/staysafe. Hot glass will cause burns. • DO NOT touch glass until it is cooled To
Inhaltszusammenfassung zur Seite Nr. 9
C. Fan Kit (optional) G. Remote Controls, Wall Controls and Wall • Refer to Figure 2. for location of control. Switches Follow the instructions supplied with the control installed to operate your fireplace: D. Clear Space For safety: WARNING! DO NOT place combustible objects in • Install a switch lock or a wall/remote control with child front of the fireplace or block louvers. High tempera- protection lockout feature. tures may start a fire. See Figure 2.2. • Keep remote controls out of rea
Inhaltszusammenfassung zur Seite Nr. 10
J. Lighting Instructions (IPI) • For normal use, activate/deactivate your fireplace with the wall switch or remote control. • The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. • If your fireplace must be deactivated for serviced or an extended period of time, follow the instructions below. This appliance needs fresh air for safe operation and must be installed so there are
Inhaltszusammenfassung zur Seite Nr. 11
K. After Fireplace is Lit Initial Break-in Procedure Indicator • The fireplace should be run three to four hours continuously on high. • Turn the fireplace off and allow it to completely cool. • Remove fixed glass assembly. See Section 14.J. • Clean fixed glass assembly. See Section 3. • Replace the fixed glass assembly and run continuously on high an additional 2 hours. This cures the materials used to manufacture the fire- place. NOTICE! Open windows for air circulation during fireplace LO
Inhaltszusammenfassung zur Seite Nr. 12
Maintenance and Service 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be Frequency: Annually replaced prior to operating the fireplace. By: Homeowner When properly maintained, your fireplace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualified service technician. • Assess condition of screen and replace as necessary. • Inspect for scratches, dents or other
Inhaltszusammenfassung zur Seite Nr. 13
B. Maintenance Tasks-Qualified Service Burner Ignition and Operation Technician Frequency: Annually The following tasks must be performed by a qualified By: Qualified Service Technician service technician. Tools needed: Protective gloves, vacuum cleaner, whisk Gasket Seal and Glass Assembly Inspection broom, flashlight, voltmeter, indexed drill bit set, and a manom- eter. Frequency: Annually • Verify burner is properly secured and aligned with pilot By: Qualified Service Technician or ignit
Inhaltszusammenfassung zur Seite Nr. 14
Installer Guide Getting Started 4 A. Typical Appliance System NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Vertical Termination Cap Noncombustible roof flashing maintains minimum Storm Collar clearance around pipe Vent pipe penetrates roof, preferably without affecting roof rafters Attic insulation shield (not shown) must be used here to Lis
Inhaltszusammenfassung zur Seite Nr. 15
B. Design and Installation Considerations D. Inspect Appliance and Components Heatilator B-type vent gas appliances are designed to The following B-vent components are needed for installa- operate with all exhaust gases expelled to the outside of tion. the building, and combustion air pulled from the room. • Fireplace Box Installation MUST comply with local, regional, state and • Pipe Components national codes and regulations. Consult insurance carrier, • Firestops local building inspector, fi
Inhaltszusammenfassung zur Seite Nr. 16
• Ensure furnace and air conditioning return vents are not E. Negative Pressure located in the immediate vicinity of the fireplace. WARNING! Asphyxiation Risk! Negative pressure can • Avoid installing the fireplace near doors, walkways or cause spillage of combustion fumes and soot. Fireplace small isolated spaces. needs to draft properly for safety. • Recessed lighting should be of “sealed can” design; attic hatches weather stripped or sealed; and attic mounted Draft is the pressure diffe
Inhaltszusammenfassung zur Seite Nr. 17
Framing and Clearances 5 A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls, Figures 5. and 5.2. WARNING! Risk of Fire or Burns! Provide adequate NOTICE: Illustrations reflect typical installations and are clearance around air openings and for service access. Due FOR DESIGN PURPOSES ONLY. Illustrations/diagrams to high temperatures, the appliance should be located out are not drawn to scale. Actual insta
Inhaltszusammenfassung zur Seite Nr. 18
C. Clearances WARNING! Risk of Fire! Maintain specified air space NOTICE: Install appliance on hard metal or wood surfaces clearances to appliance and vent pipe: extending full width and depth. DO NOT install directly on carpeting, vinyl, tile or any combustible material other than • Insulation and other materials must be secured to wood. prevent accidental contact. • The chase must be properly blocked to prevent blown insulation or other combustibles from entering and making contact with
Inhaltszusammenfassung zur Seite Nr. 19
D. Mantel and Wall Projections WARNING! Risk of Fire! Comply with all minimum clear- ances as specified. Framing or finishing material closer than the minimums listed must be constructed entirely of noncombustible materials (i.e., steel studs, concrete board, etc). Mantels 30 in. minimum to ceiling 18 17 16 16 15 15-1/4 14 14-1/2 13 13-3/4 12 13 11 12-1/4 10 11-1/2 9 10-3/4 8 10 7 9-1/4 6 8-1/2 5 7-3/4 4 7 3 6-1/4 5-1/2 5 Measured from top of hood (in inches) Figure 5.3 Minimum Vertical and M
Inhaltszusammenfassung zur Seite Nr. 20
Termination Locations 6 A. Vent Termination Minimum Clearances A B 6 in. (minimum) up to 20 in. 18 in. minimum WARNING 152 mm/508 mm 457 mm 20 in. and over 0 in. minimum Fire Risk. Maintain vent clearance to combustibles as Gas, Wood or Fuel Oil specified. Termination Cap • DO NOT pack air space with insulation or other materials. Failure to keep insulation or other materials away B from vent pipe may cause overheating and fire. A * 8 ft Gas (2.44 m) Termination Vertical Lowest wall Cap **
