Inhaltszusammenfassung zur Seite Nr. 1
DO NOT
DISCARD
Owner ’ s Manual
Installation and Operation
Model:
XLR-N-CE
XLR-PB-CE
EC-87/09/058
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow
• Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation. and operation.
W ARNING
W ARNING: I f t h e i n f o r m a t i o n i n t h e s e
HOT SURF ACES!
i n s t r u c t i o n s i s n o t f o l l o w e d e
Inhaltszusammenfassung zur Seite Nr. 2
SAMPLE Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fireplace, an important documents and product manuals. elegant and clean alternative to wood burning fireplaces. The information contained in this owner’s manual, unless The Heat & Glo gas firepla
Inhaltszusammenfassung zur Seite Nr. 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. T able of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
D. Decorative Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . 50 B. Remove the Shipping Materials . . . . . . . . . . . . . . . . . . . . 50 C. Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 D. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 E. Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
B. Limited Lifetime W arranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation with
Inhaltszusammenfassung zur Seite Nr. 6
B. Limited Lifetime W arranty (continued) WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is only valid while the HHT appliance remains at the site of original installation. • Contact your installing dealer for warranty service. If the installing dealer is unable to provide necessary parts, contact the nearest HHT author
Inhaltszusammenfassung zur Seite Nr. 7
L i s t i n g a n d C o d e A p p r o v a l s 1 The fireplace and its individual shut-off valve must be dis- A. Appliance Certification connected from the gas supply piping system during any pressure testing of the system at test pressures in excess MODELS: XLR-N-CE, XLR-PB-CE of 60 mbar. LABORATORY: GL Industries Ltd. If the fireplace must be isolated from the gas supply pip- TYPE: Gas Fireplace ing system by closing an individual shut-off valve, it must STANDARD: Latest version of BS
Inhaltszusammenfassung zur Seite Nr. 8
User Guide O p er a t i n g I n s t r u c t i o n s 2 If you expect that small children or vulnerable adults may A. Gas Fireplace Safety come into contact with this fireplace, the following precau- tions are recommended: W ARNING • Install a physical barrier such as: HOT SURF ACES! - A decorative firescreen. Glass and other surfaces are hot during operation AND cool down. - Adjustable safety gate. Hot glass will cause burns. • Install a switch lock or a wall/remote control with child
Inhaltszusammenfassung zur Seite Nr. 9
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Clear Space F . Fixed Glass Assembly WARNING! DO NOT place combustible objects in front See Section 14.E. of the fireplace or block louvers. High temperatures may G. Remote Controls, W all Controls and W all start a fire. See Figure 2.2. Switches Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Follow the instructions supplied with the control installed to operate your fireplace: F
Inhaltszusammenfassung zur Seite Nr. 10
I. Control Module Operation 5. Module Reset Switch 1. The control module has an ON/OFF/REMOTE selector This module may lock-out under certain conditions. switch that must be set. See Figure 2.3. When this occurs, the appliance will not ignite or respond to commands. The module will go into lock-out OFF Position: Appliance will ignore all power inputs and mode by emitting three audible beeps, then continuously will not respond to any commands from a wall switch or displaying an e
Inhaltszusammenfassung zur Seite Nr. 11
J. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. FOR YOUR S AFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) W A R N I N G : If you do not follow these instructions exactly, a fire or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automaticall
Inhaltszusammenfassung zur Seite Nr. 12
K. Battery T ray/Battery Installation L. After Fireplace is Lit TM The IntelliFire Plus system has a battery backup option. Initial Break-in Procedure Battery longevity and performance will be affected by the • The fireplace should be run three to four hours service temperatures of this appliance. Batteries should continuously on high. only be used as a power source in the event of an emer- • Turn the fireplace off and allow it to completely cool. gency such as an outage. • Remove fixed gl
Inhaltszusammenfassung zur Seite Nr. 13
M a i n t e n an c e an d S er v i c e 3 Decorative Doors Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace. Frequency: Annually By: Homeowner When properly maintained, your fireplace will give you many years of trouble-free service. We recommend an- T ools needed: Protective gloves, stable work surface nual service by a qualified service technician. • Refer to the installation instructions which ship with the decorative door. All par
Inhaltszusammenfassung zur Seite Nr. 14
• Gas pressure taps are accessible by removing the deco- B. Maintenance T asks-Qualified Service rative front and fixed glass assembly. Refer to Section T echnician 11.A for information related to the gas valve and gas To prevent inadvertent burner operation while servicing pressure settings. this appliance: Burner Ignition and Operation • Unplug DC regulator from junction cord. Frequency: Annually • Remove batteries from battery pack (if installed). By: Qualified Service Technician • Sh
Inhaltszusammenfassung zur Seite Nr. 15
Installer Guide G e t t i n g S t a r t ed 4 A. T ypical Appliance System NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual HORIZONTAL TERMINATION CAP (SECTION 10.K) VERTICAL TERMINATION CAP (SECTION 10.H) WALL PENETRATION FRAMING (SECTION 8.B) NON-COMBUSTIBLE ROOF STORM COLLAR FLASHING MAINTAINS MINIMUM (SECTION 10.G) CLEARANCE AROUND PIPE VEN
Inhaltszusammenfassung zur Seite Nr. 16
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to • Carefully remove the appliance and components from operate with all combustion air siphoned from outside of the packaging. the building and all exhaust gases expelled to the outside. • The vent system components and decorative doors and No additional outside air source is required. fronts may be shipped in separate packages. Before installing, determine th
Inhaltszusammenfassung zur Seite Nr. 17
F r a m i n g a n d C l e a r an c e s 5 A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1). WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies. NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOS
Inhaltszusammenfassung zur Seite Nr. 18
B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase. NOTICE: Treatment of ceiling firestops and wall shield firestops and construction of the chase may vary with the type of building. These instructions are not substitutes for the requirements of local building codes. Therefore, you MUST check local building codes to determine the requirements
Inhaltszusammenfassung zur Seite Nr. 19
C. Clearances NOTICE: Install appliance on hard metal or wood surfaces extending full width and depth. DO NOT install directly on carpeting, vinyl, tile or any combustible material other than wood. WARNING! Risk of Fire! Maintain specified air space clearances to appliance and vent pipe: • Insulation and other materials must be secured to prevent accidental contact. • The chase must be properly blocked to prevent blown insulation or other combustibles from entering and making contact wit
Inhaltszusammenfassung zur Seite Nr. 20
D. Mantel and W all Projections WARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as specified. Framing or finishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.e., steel studs, concrete board, etc). 2,5 cm FRAMING M a n t e l s ( C o m b u s t i b l e / N o n - C o m b u s t i b l e ) 1,3 cm Thick Wall 30 cm Sheathing MAX. MEASUREMENT FROM TOP OF 36 cm FIREPLACE MIN. OPENING NAILING TAB 1,2 cm FACTORY
