Bedienungsanleitung Haier Silver Sea-ox FCD-JTHMG50-III, FCD-JTHMG60-III, FCD-JTHMG80-III, FCD-JTHMG100-III

Inhaltszusammenfassung zur Seite Nr. 1

Silver Sea-ox
HAIER-THERMOCOOL Household Electric Water Heater
User's Manual
HAIER
THERMOCOOL
Limited
45/47, Town Planning Way, Ilupeju Industrial Estate,P.M.B 21132, Lagos, Nigeria.
Tel: 01-4973474, 5554768, 7734074/5
Fax: 01-5553289, 4962076
E-mail: sales@hpz.com.ng
Website: www.htcool.com
Please read this manual before usage
Retain it for future regerence
HAIER
THERMOCOOL

Inhaltszusammenfassung zur Seite Nr. 2

Pre-safe Expert Cleaning and Maintenance This mark is the designation for Pre-Safe Expert of Statement: This water heater shall only be repaired and maintained by qualified servicemen. Improper maintenance may cause severe injury or damage. HAIER-THERMOCOOL Water Heater Company, which Before opening or repairing water heater, please do pull out the power plug. indicates use of the company's patented technology Note: Before asking for service, please refer to troubleshooting section to reso

Inhaltszusammenfassung zur Seite Nr. 3

Use of Remote Controller Before Usage 1. button: Power on / off the machine. In off status, clock time is displayed and can be Dear users, adjusted by pressing Set button, and or button. Thanks for choosing HAIER-THERMOCOOL water heater product. 2.Mode button: With machined powered on, you can lightly press Mode button to shift HAIER-THERMOCOOL products have good quality and excellent performance. To facilitate between Real-time Heat / Warm, Medium Warm, Night Power, Time 1,Time 2,Ti

Inhaltszusammenfassung zur Seite Nr. 4

Features Operation Instructions D.In non-heating intelligent mode, machine stays in standby status. You can activate 2. Safe: interface by pressing any button on the control panel (buttons on remote controller are High-quality imported heat-resistant stainless steel heating element, corrosion inactive). resistant and more reliable. Fuzzy control with over-temperature protection, tank liner over-pressure protection and current leakage protection. Safe Care patented design together with the

Inhaltszusammenfassung zur Seite Nr. 5

²»¿ÉÒÔ ²» ¿É ÒÔ Operation Instructions Safety Precautions 9. Delay Time Setting Delay function means that, system automatically calculates the time needed to reach temperature setting value with a defaulted 2150 W power, then determines the time to start heating, and automatically heats to the set temperature before the preset delayed time to use hot water. Two Delay Times (Time 1 + Time 2) means machine as needed can heat water in two delayed use times. This machine can be manually set t

Inhaltszusammenfassung zur Seite Nr. 6

Setting Environment Operation Instructions Water heater automatically sets an energy saving temperature between 35 - 40 according to the difference between water temperature and ambient temperature (normally this medium temperature can ensure small demand but not shower. For shower, you need to quit Medium Warm mode, and press Mode button to enter Real-time Heating / Keeping mode.Then the water can be heated to the setting temperature in a short time.). When water temperature decreases to 3

Inhaltszusammenfassung zur Seite Nr. 7

Operation Instructions Dimensions (Fig.1) 2. Temperature Setting With the machine powered on (with no any digits flashing on the display), press or Front View Bottom View button to enter temperature setting status with the temperature digits rapidly flashing. a1 Temperature can be changed between 35 - 75 with an increment 1 . In real-time heating mode, you can directly press or button to adjust temperature setting value. In medium warm status, machine defaulted highest temperature

Inhaltszusammenfassung zur Seite Nr. 8

Installation Control Panel Illustration Installation must be made by installers of or designated by our company after-service department. The water heatershall be wall-mounted. Before installation, make sure water heater rear wires are fit firmly. Determine an installation location. Make four holes 12mm, 65 mm deep in the wall with an impact drill as shown in Fig. 2. Insert and fixexpansion hooks and expansion bolts in corresponding wall holes. Lift the water heater. Insert wall rack onto th