Bedienungsanleitung Haier Little Sea-ox FCD JTHA40-III(E), FCD-JTHA50-III(E), FCD-JTHA60-III(E)

Inhaltszusammenfassung zur Seite Nr. 1

Little Sea-ox
Haier Household Electric Water Heater
User' Manual
FCD JTHA40- E
FCD JTHA50- E
FCD JTHA60- E
Group
Qingdao Economic and Technological Development District
Haier Water Heater Co., Ltd.
Haier Garden, Qianwangang Road, Economic Development Zone,Qingdao, P. R. China
Please read this manual before usage
Retain it for future reference

Inhaltszusammenfassung zur Seite Nr. 2

Pre-safe Expert Packing List This mark is the designation for Pre-Safe Expert of Haier Water Heater Company, which indicates use of the company's Electric patented technology inside the product. It ensures you a safe User's water Expansion Expansion Safety Name bath while monitoring whether your house ground wire is live or Drain hose manual heater bolt hook valve not all the time. If this mark is lighted on, it indicates your house (set) (ply) (pcs) (copy) (pcs) (pcs)

Inhaltszusammenfassung zur Seite Nr. 3

Cleaning and Maintenance Before Usage Dear users, Statement: This water heater shall only be repaired and maintained by qualified servicemen. Improper maintenance may cause severe injury or damage. Thanks for choosing Haier water heater product. Before opening or repairing water heater, please do pull out the power plug. Haier products have good quality and excellent performance. To facilitate you to use Note: the product, please read the manual and operate accordingly. Please retain

Inhaltszusammenfassung zur Seite Nr. 4

Operation Instructions Parameters Rated voltage: 220V~,50Hz Dimension: (See to Figure 1) For the first use after installation, due to there's no water within the tank, first the city Power: 1500W Weight: (See to Figure 1) water inlet valve and mixing valve must be opened. Close the mixing valve when water Rated pressure: 0.65 / 0.75MPa Volume: (See to Figure 1) flows out continuously from the showerhead

Inhaltszusammenfassung zur Seite Nr. 5

²»¿ÉÒÔ ²»¿ÉÒÔ Installation Safety Precautions The water may drip from the discharge pipe of the pressure relied device and that this pipe must be installed in a continuously downward direction and in a frost-free environment. Check safety valve once a month as follow: move the small handle of Check if the ammeter and the diameter of the wires are in safety valve, if there's water flowing out, safety accordance with the rated current of the water heater. If necessary please have it checke

Inhaltszusammenfassung zur Seite Nr. 6

Installation Setting Environment Installation must be made by installers of or designated by our company after-service department. The water heatershall be wall-mounted. Before installation, make sure water heater rear wires are fit firmly. Determine an installation location. Make four holes 12mm, 65 mm deep in the wall with an impact drill according to installating dimension. Insert fixexpansion hooks and expansion bolts in corresponding wall holes. Lift the water heater. Insert wall rack o