Inhaltszusammenfassung zur Seite Nr. 1
™
ThermalFlo
Heat Pump
Installation
and
User's Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Inhaltszusammenfassung zur Seite Nr. 2
Customer Service If you have questions about ordering Pentair Water Pool and Spa replacement parts, and pool products, please use the following contact information: Customer Service (8 A.M. to 5 P.M. — Eastern and Pacific Times) Phone: (800) 831-7133 Fax: (800) 284-4151 Technical Support Sanford, North Carolina (8 A.M. to 5 P.M. — Eastern Time) Phone: (919) 566-8000 Fax: (919) 566-8920 Moorpark, California (8 A.M. to 5 P.M. — Pacific Time) Phone: (805) 553-5000 (Ext. 5591) Fax: (805) 553-5515 We
Inhaltszusammenfassung zur Seite Nr. 3
i Contents Important Safety Precautions..............................................................................................iii Section 1: Introduction .....................................................................................................1 ThermalFlo Overview ..............................................................................................1 General Features.....................................................................................................2 S
Inhaltszusammenfassung zur Seite Nr. 4
ii Contents, continued Section 3: Operating the ThermalFlo ...............................................................................15 Initial Start-up Precautions ......................................................................................15 Operating the Controller ..........................................................................................16 Controller Panel .......................................................................................................16
Inhaltszusammenfassung zur Seite Nr. 5
iii IMPORTANT SAFETY PRECAUTIONS Important Notice: This guide provides installation and operation instructions for the ThermalFlo HP models of Heat Pumps. Consult Pentair Water with any questions regarding this equipment. Attention Installer: This guide contains important information about the installation, operation and safe use of this product. This information should be given to the owner and/or operator of this equipment after installation or left on or near the heat pump. Attention User:
Inhaltszusammenfassung zur Seite Nr. 6
iv IMPORTANT SAFETY PRECAUTIONS (continued) Consumer Information and Safety The ThermalFlo series of heat pumps are designed and manufactured to provide many years of safe and reliable service when installed, operated and maintained according to the information in this manual and the installation codes referred to in later sections. Throughout the manual, safety warnings and cautions are identified by the “ “ symbol. Be sure to read and comply with all of the warnings and cautions. WARNING
Inhaltszusammenfassung zur Seite Nr. 7
v IMPORTANT SAFETY PRECAUTIONS (continued) Swimming Pool Energy Saving Tips It is important to note that a heat pump will not heat a pool as fast as a large gas or electric pool heater. If the pool water is allowed to cool significantly, it may take several days to return to the desired swimming temperature. For weekend use, it is more economical to maintain the pool water temperature at or near your desired swimming temperature. If you do not plan to use your pool for a prolonged period, then y
Inhaltszusammenfassung zur Seite Nr. 8
vi IMPORTANT SAFETY PRECAUTIONS (continued) General Installation Information 1. Installation and service must be performed by a qualified installer or service agency, and must conform to all national, state, and local codes. 2. The ThermalFlo heat pump gets electrical power from an external source and provides a dual electronic thermostat control system for pool/spa combinations or preheat convenience. 3. This heat pump is specifically designed for heating fresh water swimming pools and spas. Do
Inhaltszusammenfassung zur Seite Nr. 9
1 Section 1 Introduction ThermalFlo Overview The ThermalFlo heat pump gets electrical power from an external source and provides a dual electronic thermostat control system for pool/spa combinations or preheat convenience. ThermalFlo HP heat pumps transfer the heat from the outside air to your pool, providing the most energy efficient pool and spa heating available. Compared to gas, oil, or electric heaters, ThermalFlo HP heat pumps operate up to 80% less, saving you hundreds of dollars in energ
Inhaltszusammenfassung zur Seite Nr. 10
2 General Features • Dual digital thermostats offer precise temperature control to maintain the desired separate water temperatures in pool/spa combinations without overheating or wasting energy. • Long-life corrosion resistant composite cabinet stands up to severe climates and pool chemicals. ® • High efficiency Trane compressor is the most energy efficient, durable, and quiet compressor available. • Self-diagnostic control panel monitors and troubleshoots heat pump operations to ensure safe, d
Inhaltszusammenfassung zur Seite Nr. 11
3 Section 2 Installation The following general information describes how to install the ThermalFlo heat pump. Note: Before installing this product, read and follow all warning notices and instructions starting on page iii. Installing the ThermalFlo Only a qualified service person should install the ThermalFlo heat pump. Materials needed for Installation The following items are needed and are to be supplied by the installer for all heat pump installations: 1. Plumbing connections (2 inch). 2. Le
Inhaltszusammenfassung zur Seite Nr. 12
4 ThermalFlo Heat Pump Dimensions 38.7" 30.7" WATER PRESSURE REMOTE THERMOSTAT POOL SPA HEATING MODE POWER/ COOLING TEMPERATURE SETTING AUTO-HEAT/COOL POOL SPA PRESS CHECK SET TEMPERA ANY ARROW ONCE TURE TO A ETL LISTED UL STD CONFORMS 1995 TO C US 3044065 CAN/CSA STD C2 2.2 NO CERTIFIED T . 236 O PART NUMBER SERIAL NO. CONTAINER ID PRODUCT SPEC LABEL ThermalFlo™ HP 11.25" 9.25" 4.5" 18.0" 6.5" .5" 32.0" MODEL NUMBER 50 00 70 0 90 01C 201C 200 1200R H/ Figu
Inhaltszusammenfassung zur Seite Nr. 13
5 Clearances All criteria given in the following sections reflect minimum clearances. However, each installation must also be evaluated, taking into account the prevailing local conditions such as proximity and height of walls, and proximity to public access areas. The heat pump must be placed to provide clearances on all sides for maintenance and inspection. 1. At least 24 in. [61cm] access must be available in the front and 12 in. [30 cm] on all the other sides of the heat pump for service, se
Inhaltszusammenfassung zur Seite Nr. 14
6 Drainage and Condensation Condensation will occur from the evaporator coil while the unit is running and drain at a steady rate, usually three to five gallons per hour, depending upon ambient air temperature and humidity. The more humid the ambient conditions, the more condensation will be produced. The bottom of the unit acts as a tray to catch rainwater and condensation. Keep the drain holes, located on the bottom pan of the base of the unit, clear of debris. Lawn Sprinklers N NO SPRINKLERS
Inhaltszusammenfassung zur Seite Nr. 15
7 Anchor Clamp(s) Installation, continued AIR COIL GUARD AIR 6. Drill a hole in the cement using a masonry drill bit, with a COIL diameter as determined by the concrete anchor, at each of the 1-3/8" HEX BOLT (installer provided) marks on the equipment pad. The hole should be approximately 1½ in. deep. HEAT PUMP ANCHOR CLAMP HEAT PUMP 7. Insert a bolt anchor into each of the holes. Be sure the anchors BASE are set completely into the holes BOLT ANCHOR (installer provided) 8. Position the anchor c
Inhaltszusammenfassung zur Seite Nr. 16
8 Water Connections at the Heat Pump Two inch Quick Connect fittings have been installed on the water inlet and outlet connections, see Figure 7. Filtered cool water is plumbed to the inlet, located on the right side of the heat pump front panel. Heated water flows through the outlet, located on the left side of the heat pump front. Water Plastic piping (PVC Schedule 40) should be connected to the heat Inlet Union pump. The unions, provided with the unit, accept 2 in. PVC pipe. CAUTION — Make s
Inhaltszusammenfassung zur Seite Nr. 17
9 Multiple Unit Installation Heat Pump, Heater and/or Solar Combination In certain regions of the country it may be more economical to run a heat pump during the warmer months and a gas heater during the cooler months. In some situations it may be desirable to run the heat pump in the “Chiller” mode, if so equipped, during the hottest portion of the year and a heater during the cooler months. The Pentair Water heat pump may be used in conjunction with a gas or electric heater or any combination
Inhaltszusammenfassung zur Seite Nr. 18
10 Multiple Heat Pump Connections All plumbing on multiple heat pump installations must be done in parallel see Figures 9 and 10. An equal flow of water to each heat pump is important for optimum operation. NOTE: It may be necessary to adjust water pressure switch if a unit is installed below the water level. See page 20 for details on when and how to adjust the pressure switch. Each heat pump allows a maximum flow rate of 125 gpm and requires a minimum of 30 gpm. 24 inches min. clearance around
Inhaltszusammenfassung zur Seite Nr. 19
11 Electrical Connections WARNING —Risk of electrical shock or electrocution. This heat pump contains wiring that carries high voltage. Contact with these wires could result in death or serious injury to pool or spa users, installers, or others due to electrical shock, and may also cause damage to property. Always disconnect power circuit before connecting the heat pump. CAUTION — Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous ope
Inhaltszusammenfassung zur Seite Nr. 20
24 VAC BROWN BROWN PINK PURPLE Green 12 Wiring Diagram 460812, 460813, 460814, 460815, 460822, 460804 10K Thermistor Heat Pump Control Board REMOTE TEMPERATURE Switch factory set to H THERMISTER Optional for 460812, 460813, Reversing Valve on 460814, 460815, set to 460822 C for 460804, and set to HC AU AU for 460822 (on back of circuit board) 24 VAC TBR TBL BLUE BLUE WHITE 1 1 WHITE YELLOW YELLOW 2 2 PURPLE WHITE WHITE 3 3 PURPLE WHITE WHITE 4 4 BLACK BLACK BLACK 5 5 BLACK BLACK BLACK 6 6 RED RE
