Inhaltszusammenfassung zur Seite Nr. 1
READ AND SAVE THESE INSTRUCTIONS
Model No.
CF755AB04 CF755NW04
CF755OB04 CF755PB04
CF755BK04 CF755TG04
CF755WW04 CF755H04
CF755S04 CF755WPB04
by
®
CF755DB04 CF755V04
CF755W04 CF755HTW04
CF755BS04 CF755WB04
CF755BQ04 CF755PW04
DESIGNER
CF755AW04
Ceiling Fan
Net Weight: 17.3 Lbs.
Owner's Manual
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be
Inhaltszusammenfassung zur Seite Nr. 2
WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of
Inhaltszusammenfassung zur Seite Nr. 3
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50-100 ft. 12 One 1/4” blade screwdriver One wire stripper Three wire connectors (supplied). ! WARNING MATERIALS Before assembly your ceiling fan, refer to section on Wiring outlet box and box connectors must be of type proper method of wiring your fa
Inhaltszusammenfassung zur Seite Nr. 4
3. Make sure the grommet is properly installed in the How to Put Your Ceiling coupling cover, then slide the coupling cover on Fan Together the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure 1. Remove the hanger ball by loosening the setscrew that the ceiling cover and the coupling cover are in the hanger ball until the ball falls freely down the both oriented correctly (Figure 3). downrod (Figure 1). Remove the pin from the downrod, then remove th
Inhaltszusammenfassung zur Seite Nr. 5
housing assembly with the holes in the plate. ! WARNING Secure the switch housing assembly by installing the three screws (Figure 6). To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, WARNING balancing the blades or cleaning the fan. Do not ! insert foreign objects in between rotating fan blades. To avoid possible fire or shock, do not pinch wires between the switch cup assembly and the switch 11. The blade flanges have an interlocking feature
Inhaltszusammenfassung zur Seite Nr. 6
NOTE: CEILING COVER, How to Hang Your SUPPLY WIRES AND OUTLET FAN WIRES OMITTED BOX Ceiling Fan FOR CLARITY. WARNING ! The fan must be hung with at least 7' of clearance from floor to blades (Figure 9). HANGER BRACKET CEILING Figure 11 HANGER BALL/ DOWNROD ASSEMBLY How to Wire Your Ceiling Fan AT LEAST 7' If you feel that you do not have enough electrical wiring knowledge or experience, have your fan Figure 9 FLOOR installed by a licensed electrician. ! WARNING ! WARNING The outlet box must be s
Inhaltszusammenfassung zur Seite Nr. 7
3. Screw the two threaded studs (supplied) into the Maintenance tapped holes in the hanger bracket. IMPORTANT CARE INSTRUCTIONS 4. Lift the ceiling cover up to the threaded studs and for your Ceiling Fan turn until studs protrude through the holes in the ceiling cover (Figure 13). Periodic cleaning of your new ceiling fan is the only maintenance that is needed. 5. Secure the ceiling cover in place by sliding lockwash- ers over the threaded studs and installing the two When cleaning, use only a s
Inhaltszusammenfassung zur Seite Nr. 8
WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your ! Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, 2. Check line wire connections to fan and switch or loose switch wire connections in the wire connections in the switch housing. switch housing. ! WARNING: Make sure main pow
Inhaltszusammenfassung zur Seite Nr. 9
Repair Parts 2 1 3 15 5 4 16 17 20 7 6 9 19 12 13 14 11 8 10 18 9
Inhaltszusammenfassung zur Seite Nr. 10
Repair Parts Listing Model No. Key No. Description CF755AB04 CF755BK04 CF755DB04 CF755WB04 CF755NW04 CF755PB04 CF755OB04 CF755TG04 CF755BS04 CF755PW04 * Hanger Ball Assembly, 760750 760750-5 760750-30 760750-39 760750-29 760750-1 760750-36 760750-37 760750-24 760750-42 Consisting of: 1 Hanger Bracket — — — — — — — — — — 2 Hanger Ball — — — — — — — — — — 3 Downrod — — — — — — — — — — * Parts Bag Containing: 761442 761442 761442 761442 761442-1 761442-1 761442 761442 761442-2 761442 4 Wire Connect
