Bedienungsanleitung Soleus Air FS1-40R-33

Inhaltszusammenfassung zur Seite Nr. 1

16” Stand Fan with Remote Control
Model No: FS1-40R-33
Operating Instructions
3072986
FS1-40R-33
© 2006 Soleus Air International

Inhaltszusammenfassung zur Seite Nr. 2

Thank you for choosing a Soleus Air 16” Stand Fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name:

Inhaltszusammenfassung zur Seite Nr. 3

WARNING: This heater is equipped with a polarized plug (one blade is wider than the other). The plug is in- tended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG. TECHNICAL SPECIFICATIONS Voltage Rating 120V, 60Hz Power Consum

Inhaltszusammenfassung zur Seite Nr. 4

PRODUCT DIAGRAM 4

Inhaltszusammenfassung zur Seite Nr. 5

ASSEMBLY INSTRUCTIONS Tools required: Phillips screwdriver (not included) Remove the fan and packaging materials from the box. Base Assembly 1. Attach the Lower Pole (M) to the Fan Base (N) with the included Screws (P) and Washers (O). 2. Attach the Upper Pole (I) to the Lower Pole (M) and tighten the screw located on the bottom of the Upper Pole (I). Fan Head Assembly 1. Unscrew (turn clockwise) the Fan Blade Cap (C) if it attached to the Motor Shaft (G). Note: Fan B

Inhaltszusammenfassung zur Seite Nr. 6

OPERATING INSTRUCTIONS Using Fan Controls 1. Set the fan on a stable, level surface. 2. Turn the fan on by pressing the POWER/SPEED button located on the control panel below the Multi-Color display, or the POWER/SPEED button on the Remote Control. 3. Adjust the speed setting by pressing the POWER/SPEED on the control panel or remote control. 4. Pressing the MODE button on either the fan or the remote will choose the desired wind mode: Standard, Sleep, & Natural. In standard mode the

Inhaltszusammenfassung zur Seite Nr. 7

CLEANING & MAINTENANCE 1. Turn the fan off and unplug the unit. 2. Wipe the fan down with a damp cloth for most efficient operation. 3. Air dry the fan completely before use. 4. Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit. 5. Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing. Fan Blade Cleaning: • Make certain the fan is unplugged. Unlock the metal clips

Inhaltszusammenfassung zur Seite Nr. 8

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FS1-40R-33 16” Stand Fan to be free of defects in ma- terial and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time