Bedienungsanleitung Soleus Air FT1-30-44

Inhaltszusammenfassung zur Seite Nr. 1

12 INCH OSCILLATING
METAL TABLE FAN

OWNER’S MANUAL
Model # FT1-30-44



PLEASE READ AND SAVE THESE INSTRUCTIONS

Inhaltszusammenfassung zur Seite Nr. 2

12 INCH OSCILLATING METAL TABLE FAN Thank you for choosing a Soleus Air fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and seri

Inhaltszusammenfassung zur Seite Nr. 3

10) We do not recommend the use of an extension cord. It could overheat and cause a fire hazard. 11) Unplug the fan before cleaning or making repairs. NOTE: If for any reason this unit requires service, return appliance to manufacturer or a similarly qualified service agent to ensure safety. 12) To reduce the risk of fire or electric shock, do not use this fan with any solid- state speed control device. 13) To disconnect, grip plug and pull from wall outlet. Never pull on the cord to un

Inhaltszusammenfassung zur Seite Nr. 4

Product Diagram 4

Inhaltszusammenfassung zur Seite Nr. 5

Assembly Instructions Estimated assembly time: Approximately 5 minutes Tools required: Phillips screwdriver (not included) 1) Remove the fan and packaging materials from the box. 2) Remove the mounting nut from the motor shaft. 3) Position the back grille over the motor shaft, aligning the holes in the back grille with the two knobs that protrude from the motor. Make sure the handle is at the top. 4) Secure the back grille by screwing on the mounting nut. Turn c

Inhaltszusammenfassung zur Seite Nr. 6

Operating Instructions 1) Set the fan on a stable, level surface. 2) Confirm that the Speed Control Knob is set to “O” (off). Plug the cord into a standard outlet. 3) Adjust to the desired speed setting: O: Off I: Low Speed II: Medium Speed III: High Speed 4) The fan can operate in oscillation or stationary mode. Press the Oscillation Knob down to activate the oscillation mode. To stop oscillation, pull control knob up. 5) To adjust the tilt of the fan head, grasp the fan motor

Inhaltszusammenfassung zur Seite Nr. 7

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FT1-30-44 to be free from defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International, Inc. will, at its option, either repair or replace it, free of charge within a reasonable time after the unit