Inhaltszusammenfassung zur Seite Nr. 1
English Español
For Your Records and
Warranty Assistance
T T Type 3 Models ype 3 Models ype 3 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________ Westside II
Model Name
21621 __________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42797-01
20081113
©2008 Hunter F
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Inhaltszusammenfassung zur Seite Nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
Inhaltszusammenfassung zur Seite Nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64 in. bit • Standard screwdriver (ma
Inhaltszusammenfassung zur Seite Nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box Ceiling and associated wall switch location. If you cannot lock the circuit breakers Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the Step 2-2 outermost holes in the outlet
Inhaltszusammenfassung zur Seite Nr. 6
3 • Assembling the Top Housing Steps 3-1 – 3-2 3-1. To assemble the housing to the hanger adapter, align the three Assembly Screw raised tabs on the hanger adapter with the three narrow notches in the top housing. Make certain the housing sits flat on the Top Housing adapter. Hanger Adapter 3-2. Install three (3) assembly screws and tighten them securely. 6 42797-01 • 11/13/08 • Hunter Fan Company
Inhaltszusammenfassung zur Seite Nr. 7
4 • Assembling and Hanging the Fan Steps 4-1 – 4-2 You can assemble your fan for standard mounting (steps 4-1 – 4-2) or for low profile mounting (steps 4-3 – 4-5). Note: For low profile mounting, the downrod is replaced with the low profile washer. Downrod 4-1. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod. 4-2. Loosen the square head set screw on the adapter to install the Canopy pipe
Inhaltszusammenfassung zur Seite Nr. 8
43 21 43 21 43 21 43 21 4 = off 4 = off 3 = on 3 = on 2 = on 2 = off 1 = on 1 = on 5 • Setting the Remote Transmitter and Receiver IMPORTANT! Before you change the jumper settings, make sure the battery is not connected to the transmitter. Setting Transmitter and Receiver Codes When two or more fans are located near each other, you may desire to have the receiver/transmitter for each fan set to a different code, Receiver Jumpers so that the operation of one fan does not affect the operation
Inhaltszusammenfassung zur Seite Nr. 9
6 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 6-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 6-2. Place the receiver inside the canopy, making sure that the dipswitches
Inhaltszusammenfassung zur Seite Nr. 10
6 • Wiring the Fan (Continued) 6-6. Using the large wire connectors, connect the fan and receiver to the power wires as follows: • Connect the white wire (A/C IN) from the receiver to the white wire from the ceiling. • Connect the black wire from the receiver to the black wire from the ceiling. CAUTION: Be sure no bare wire or wire strands are visible after making connections. 6-7. Run the thin white antenna wire from the receiver through one of the slots in the ceiling plate. (For be
Inhaltszusammenfassung zur Seite Nr. 11
7 • Installing the Canopy 7-1. Holding the canopy, raise the fan off the hook. 7-2. Align the holes in the canopy with the mounting holes on the ceiling plate. 7-3. Insert and tighten the mounting screws securely. Canopy Steps 7-1– 7-3 Mounting Screw 11 42797-01 • 11/13/08 • Hunter Fan Company
Inhaltszusammenfassung zur Seite Nr. 12
3 • A 3 • As ss se em mb bl li in ng t g tb be B e Bl la ad de es s 8 • Assembling the Blades 8-1. Insert blade into slot. Align the holes on the blade with the holes Fan Motor in the fan motor. Holes 8-2. Slide flat washers onto the shafts of the blade assembly screws. 8-3. Attach the blade to the motor using the blade assembly screws. 8-4. Repeat for each blade. Step 8-1 Blade Assembly Screw Step 8-2 Flat Washer 12 42797-01 • 11/13/08 • Hunter Fan Company
Inhaltszusammenfassung zur Seite Nr. 13
9 • Completing Your Installation Steps 9-1 – 9-8 9-1. Partially install two light kit fitter screws into the light kit mounting plate. 9-2. Thread the plug connector from the fan through the light kit fitter. Light Kit 9-3. Align the keyholes in the light kit fitter with the two partially Fitter Ballast installed screws and rotate to engage the screws in the narrow ends of the keyholes. Fluorescent Bulb 9-4. Install the remaining screw to secure the light kit fitter to the light kit
Inhaltszusammenfassung zur Seite Nr. 14
10 • Operating the Remote Control and Mounting the Holder Reversing Switch 10-1. The remote transmitter has individual buttons for turning the fan off and on and controlling the light and fan speed. 10-2. For best operation, start the fan by pressing high, then select your Fan Speed desired speed. High Fan Speed 10-3. The reversing switch reverses the direction of the fan. Medium Fan Speed 10-4. Press the OFF button to turn the fan off. Low Fan Off 10-5. The light button turns the ligh
Inhaltszusammenfassung zur Seite Nr. 15
11 • Operating and Cleaning Your Ceiling Fan 11-1. Restore power at the main electrical panel and turn on the wall switch. The light kit should turn ON. Note: To turn on the light without the remote, turn off the wall switch for 5 seconds, then back on. The light kit will turn on at maximum brightness. 11-2. Press the remote control’s HIGH speed button. The fan should start and reach its maximum speed. Note: For everyday operation, leave the wall switch ON. If the remote
Inhaltszusammenfassung zur Seite Nr. 16
Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills. * On average at low speed settings. Your sa
Inhaltszusammenfassung zur Seite Nr. 17
12 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. Problem: Noisy operation. 1. Tighten the blade screws until snug. 2. Check to see if the blade is cracked. If so, replace all the blades. 3. Be sure that the glass is secure. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use
