Inhaltszusammenfassung zur Seite Nr. 1
English Francias
For Your Records and
Warranty Assistance
T T Type 2 Models ype 2 Models ype 2 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42679-01
20090115
©2009 Hunter Fan Co.
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Inhaltszusammenfassung zur Seite Nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
Inhaltszusammenfassung zur Seite Nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Inhaltszusammenfassung zur Seite Nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi
Inhaltszusammenfassung zur Seite Nr. 6
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angled Mounting installation instructions. Steps 3-2 – 3-3 3-1. Unbundle the wires from the fan. Downrod For Standard or Angled mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball. Canopy 3-3. Loosen the square head setscrew on the adapter to install the pipe Setscr
Inhaltszusammenfassung zur Seite Nr. 7
4 • Securing Fan to Secondary Support System 4-1. Find the looped end of the braided cable and insert it through the ceiling plate and one of the holes in the outlet box into the ceiling. 4-2. Access the support brace in the ceiling. You may not be able to do this from below the ceiling depending on your installation site. 4-3. Drive a wood screw and washer into the side of the brace that holds the outlet box. Leave 3mm (1/8”) of space between the support brace and the washer. 4-4. Wrap
Inhaltszusammenfassung zur Seite Nr. 8
fsdfsdf 5 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wire Connector Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 5-1. Before attempting installation, make sure the power is still off. 5-2. To connect the wires, hold the bare metal leads together and place a wire connector over the
Inhaltszusammenfassung zur Seite Nr. 9
6 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 6-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 6-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 6-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.
Inhaltszusammenfassung zur Seite Nr. 10
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, Step 7-1 (Detail) insert them by hand into the holes on the blades. 7-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 7-3. Remove the blade mounting screws and rubber shipping bumper
Inhaltszusammenfassung zur Seite Nr. 11
8 • Completing Your Installation With or Without a Multi Staked Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 8-1. To attach the upper switch housing, partially ins
Inhaltszusammenfassung zur Seite Nr. 12
8 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.) 8-6. To attach the lower switch housing, connect the upper plug Plug Connector connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper Lower operation and damage to the product. S
Inhaltszusammenfassung zur Seite Nr. 13
8 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.) Uninstalling the Light Fixture Steps 8-11 – 8-16 Light Assembly 8-11. You must remove the wiring harness and its Reversing Housing Switch components from the integrated light fixture. You must then install the wiring harness into the Capacitors empty switch housing included with the fan. 8-12. Locate the reversing switch and carefully remove Fan the two screws holding the reversing switch to the Spee
Inhaltszusammenfassung zur Seite Nr. 14
9 • Operating and Cleaning Your Ceiling Fan 9-1. Turn on electrical power to the fan. 9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 9-3. The light pull chain contr
Inhaltszusammenfassung zur Seite Nr. 15
10 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Check
