Bedienungsanleitung Soleus Air MS-11

Inhaltszusammenfassung zur Seite Nr. 1

FLAT PANEL REFLECTIVE HEATER

FLAT PANEL

REFLECTIVE HEATER
Product Information


USER MANUAL Reflective heating technology warms like the sun, directly warming the person or object in
front of it. As surface temperatures rise above the air temperature, they in turn warm the air.
Model # MS-11
Reflective heaters are great for open or large rooms, and actually save you energy by warming
objects and not the entire room.

Reflective heating is both safe and healthy– it

Inhaltszusammenfassung zur Seite Nr. 2

Warnings 14. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. When using this electric unit, basic safety precautions should always be followed to reduce The use of attachments not recommended or sold by unauthorized dealers may cause the risk of fire, electric shock and injury to persons, including the following: hazards. 1. Read all instructions before using t

Inhaltszusammenfassung zur Seite Nr. 3

Operating Instructions Product Diagram (Figure 1) 1) Place the heater on a firm, level surface and plug into a grounded 115V 60Hz power outlet. 2) Press the buttons located on top for the desired setting: (refer to Figure 2) LOW: Only one of the reflective tubes will operate, heating up to 400W. HIGH: Both reflective tubes operate, heating up to 800W. SWING: The unit will oscillate 60.° This feature can be used on both low and high 1) Built-in Carrying Handle (in back) settings

Inhaltszusammenfassung zur Seite Nr. 4

As some states do not allow the limitation or exclusion of incidental or consequential Troubleshooting damages, or do not allow limitation on implied warranties, the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may HEATER WILL NOT WORK also have other rights that vary from state to state. 1) Check if the power cord is plugged into an electrical outlet, if not, plug in. 2) Check if electricity to the main fuse is workin