Bedienungsanleitung Marley Engineered Products L SERIES

Inhaltszusammenfassung zur Seite Nr. 1

L Series
Hand Carry Portable Radiant Heaters
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise investment select-
ing the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in
this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the industry’s
lea

Inhaltszusammenfassung zur Seite Nr. 2

OPTIONAL ACCESSORIES WIRING a Marley Engineered Products L series radiant heaters can be WARNING ! field modified by adding optional kits. ELECRIC SHOCK HAZARD. Disconnect all power before Cord Kits installing or servicing heater. Failure to do so could result in Cord kits consist of 25 feet of 90°C cable and a right angle personal injury or property damage. Heater must be effectively cord fitting which can connect directly to the heater terminal box grounded in accordance with the National El

Inhaltszusammenfassung zur Seite Nr. 3

4. Remove retainer screw located on the reflector at the terminal MAINTENANCE end. a WARNING 5. Loosen (2), 3/8" nuts from the terminal box bracket located on ! the back of the heater and slide the entire heating element ELECRIC SHOCK HAZARD. Disconnect all power before assembly out of the reflector assembly. servicing or replacing heating elements. 6. Remove wires and jumper straps as required to replace the failed heating element(s). The heater requires no special maintenance other than 7. Re

Inhaltszusammenfassung zur Seite Nr. 4

LIMITED WARRANTY All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or w