Inhaltszusammenfassung zur Seite Nr. 1
Ceramic
Heater Instruction Booklet
KCE520
KCE520_IB_FA.indd 1 12/10/09 12:10 PM
Inhaltszusammenfassung zur Seite Nr. 2
Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au KCE520_IB_FA.indd 2 12/10/09 12:10 PM
Inhaltszusammenfassung zur Seite Nr. 3
Contents Kambrook Recommends p4 Safety First Your Ceramic Heater p6 Quick Start Guide p7 Using Your Ceramic Heater p8 Care and Cleaning p11 Warranty Details p12 KCE520_IB_FA.indd 3 12/10/09 12:10 PM
Inhaltszusammenfassung zur Seite Nr. 4
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions. Important Safeguards For Your Kambrook Ceramic Heater •
Inhaltszusammenfassung zur Seite Nr. 5
• Do not allow materials that have been • Do not touch hot surfaces. in contact with oil, petroleum based • Switch off at the control switch and products or drying fluids to come in power outlet, then unplug and allow contact with the heater. heater to cool down before cleaning or • Do not run the cord under carpeting or storing. cover the cord with rugs, runners or the • Use this heater only as described in this like. Arrange cord away from traffic areas instruction manual. Any ot
Inhaltszusammenfassung zur Seite Nr. 6
Your Ceramic Heater 1. 1800 watt ceramic heating 6. Power/Swing button to turn the element for efficient heating heater on and off, and activate the 90° degree oscillation for 2. LCD screen warmth throughout the room 3. ThermoGuard protection for 7. Variable temperature buttons peace of mind to maintain your desired Control Panel temperature setting 4. Convenient 8hr auto-off timer 8. Power-on indicator 5. 2 heat setting, plus auto mode Not Shown and fan only setting • Convenient carry h
Inhaltszusammenfassung zur Seite Nr. 7
Quick Start Guide Setting the Turning the heating heater on mode Plug the cord Switch on the Press the The heater will Press the MODE into a 230V or unit using the POWER/SWING start operating button to 240V power ON/OFF switch. button to at the LOW heat select the HIGH point and activate setting. heat setting, switch on. and retain a comfortable temperature for your room. Setting the Setting the Turning the variable oscillation heater off temperature Press the Press the Press and ho
Inhaltszusammenfassung zur Seite Nr. 8
Using Your Ceramic Heater To activate the heater, press the Before First Use POWER/SWING button. The heater Remove any promotional material or will start operating on the LOW heat packaging from the heater. setting (1100 watts) and the LCD Unwind the cord to its full length screen will illuminate, displaying the and place the heater on a firm, level ambient room temperature and heat surface in a stable upright position. setting. Visually inspect the air inlet and outlets to ensure the
Inhaltszusammenfassung zur Seite Nr. 9
Setting the Variable Setting the Oscillation Temperature The oscillation function works in all operating modes. The variable temperature can Press the POWER/SWING button be used to maintain your desired once to activate the oscillation. The temperature. heater will begin to oscillate from side to side. NOTE: The variable Press the POWER/SWING button temperature only operates again to stop the heater from when the heater is being used oscillating. in the Auto mode. Setting the Auto
Inhaltszusammenfassung zur Seite Nr. 10
Using Your Ceramic Tower Heater continued ThermoGuard Overheating Safety Device Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait for the heater to cool for the protection system to reset before attempting to restart the heater. 10 KCE520_IB_FA.indd 10 12/10/09 12:10 PM
Inhaltszusammenfassung zur Seite Nr. 11
Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater in this condition. Do not attempt to open the case of the heater at any time as there are no customer serviceable parts inside. When not in use, store
Inhaltszusammenfassung zur Seite Nr. 12
Kambrook 12 Month Replacement Warranty In Australia, this Kambrook Replacement Warranty The Kambrook Replacement Warranty does not does not affect the mandatory statutory rights apply to any defect, deterioration, loss, injury or implied under the Trade Practices Act 1974 damage occasioned by, or as a result of, misuse and other similar State and Territory legislation or abuse, negligent handling or if the product has relating to the appliance. It applies in addition been used other than in
