Inhaltszusammenfassung zur Seite Nr. 1
PROPANE/LP GAS LIGHT HEATER
OWNER’S MANUAL
MOdELS
Td100A, Td102A,
Td104A ANd Td110A
Adjustable Temperature
Settings:
Low - 20,000 Btu
High - 36,500 Btu
WARNING: For
Outdoor Use Only
WARNING: Read and understand this manual before
assembling, starting, or servicing heater. Improper use
of heater can cause serious injury, property damage, or
death. Keep this manual for future reference.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
F
Inhaltszusammenfassung zur Seite Nr. 2
TAbLE OF CONTENTS Safety .................................................................. 2 Wiring Diagram .................................................... 9 Product Identification ........................................... 4 Parts .................................................................. 10 Unpacking Heater ................................................ 4 Troubleshooting ................................................. 14 Assembly .............................................
Inhaltszusammenfassung zur Seite Nr. 3
SAFETy Continued Improper replacement parts could cause threads and marked “Use with Type 1” and serious or fatal injuries. a safety relief device having a direct com- munication with the vapor space of the 17. Certain materials or items, when stored in cylinder. The cylinder used must include front of heater, will be subjected to radiant a collar to protect the cylinder valve. The heat and could be seriously damaged. cylinder must be equipped with a listed 18. Shut heater off immediately
Inhaltszusammenfassung zur Seite Nr. 4
SAFETy PROdUCT Continued IdENTIFICATION Clothing or other flammable mate- rials should not be hung from the heater or placed on or near heater. Gas Light Installation and repair should be (Inside Deco done by a qualified service per- Shroud) son. Heater should be inspected before use and at least annually by a qualified service person. More Burner frequent cleaning may be required (Behind Grill) as necessary. It is imperative that control compartments, burners, and circulating air pa
Inhaltszusammenfassung zur Seite Nr. 5
ASSEMbL y Estimated assembly time: 45 minutes Description Part No. 1 Tools required: A 2 /4" Hex Bolt (2) HC4-18C B 12 mm Hex Nut (2) NPC-5C • #2 Phillips screwdriver • 1/2", 5/16" and 7/32" Open end wrenches C 5/8" Screw (14) 119619-03 D 5 mm Washer (14) 119600-02 Hardware packet provided with heater may E 5/16" Hex Nut (14) NPC-3C contain more parts than needed for heater F 3/8" Screw (20) 119619-06 assembly. G 7/32" Hex Nut (20) NPC-1C Hardware packet contains the following items H 3/8" Se
Inhaltszusammenfassung zur Seite Nr. 6
Pilot ASSEML b y Assembly Continued BURNER AND LIGHTPOST ASSEMBLY 1. Locate 4 lightpost panels that are pack- Screw aged together. Assemble of the pieces (H) with 4 screws (H) as shown in Figure 5. Lightpost Assembly 2. Place lightpost top over panel assembly Open Side aligning screw holes. Attach with screws of Panel (H) as shown in Figure 5. Assembly . Pilot light and wiring has been placed Screw (H) to Back of inside top of burner assembly for ship- Heater ping. Carefully remov
Inhaltszusammenfassung zur Seite Nr. 7
. Connect white ground wire attached to ASSEML b y cabinet to right post on electronic ignitor. Continued Remove wire tie. Connect black ignitor HEATER ASSEMBLY wire to left post on electronic ignitor. Install Note: If needed, acquire assistance lifting battery in ignitor as shown on page 12. assembly. 4. Install batteries in battery holder as shown 1. Place entire lightpost assembly on top on page 12. Do not mix batteries. of cabinet base assembly. Attach with 4 5. Connect regulator to
Inhaltszusammenfassung zur Seite Nr. 8
OPERATION Continued CHECKING FOR LEAKS 1. Turn heater valve to OFF position. ON 2. Turn cylinder supply valve fully counter OFF OFF clockwise to OPEN position. GAS LIGHT . Use a noncorrosive leak detection solution I G N I TOR POWER SWITCH START-LOW to check the connection for leaks before H I GH attempting to light heater. If leak is found, Figure 10 - Gas Light Heater Controls turn cylinder valve to CLOSE and do not SHUTDOWN INSTRUCTIONS use until all leaks are corrected. 1. Press contro
Inhaltszusammenfassung zur Seite Nr. 9
MAINTENANCE SPECIFICATIONS • Rating: High - 36,500 Btu/Hr (10.7 kw) WARNING: Never attempt Low - 20,000 Btu/Hr (5.86 kw) to service heater while it is • Fuel: Propane Vapor Only connected to propane/LP supply, • Fuel Consumption/Hour: Min. 0.22 gal (0.8 liter), Max. 0.9 gal (1.48 liter) operating, or hot. Severe burns Min. 0.9 lb (0.42 kg), Max 1.67 lb (0.76 kg) can occur. Any guard or other • Supply Pressure (To Regulator): protective device removed for Maximum - 200 psi (1,79 Kp
Inhaltszusammenfassung zur Seite Nr. 10
PARTS CABINET ASSEMBLY MODELS TD100A, TD102A, TD104A AND TD110A 6 1 2 2 7 9 18 8 3 10 4 4 11 4 4 5 14 17 13 16 12 15 10 www.desatech.com 122527-01B
Inhaltszusammenfassung zur Seite Nr. 11
PARTS CABINET ASSEMBLY This list contains replaceable parts used in your heater. When ordering parts, follow the instructions listed under Replacement Parts, page 15. KEY NO. PART NO. DESCRIPTION qTY. 1 118890-01 Lightpost Top Cap • 1 118890-02 Lightpost Top Cap • • 1 2 118891-01 Deco Light Shroud Assembly, Mission • • 2 118891-02 Deco Light Shroud Assembly, Ornate • 2 118892-01 Lightpost Top • 1 118892-02 Lightpost Top • • 1 4 118885-01 Lightpost Panel • 4 118885-02 Lightpost Panel • • 4 5
Inhaltszusammenfassung zur Seite Nr. 12
PARTS GAS COMPONENTS MODELS TD100A, TD102A, TD104A AND TD110A 1 2 3 CAUTION: Do not disposed of in fire. Batteries may explode or leak, and cause burn or injury. Do not mix old and new batteries. 5 21 Do not mix alkaline, standard (carbon - zinc) or rechargeable (nickel - cadmium) batteries. D Batteries 4 AA Battery Positive UP 6 10 18 20 7 22 2 8 19 17 12 9 16 11 15 13 14 12 www.desatech.com 122527-01B
Inhaltszusammenfassung zur Seite Nr. 13
PARTS GAS COMPONENTS MODELS TD100A, TD102A, TD104A AND TD110A This list contains replaceable parts used in your heater. When ordering parts, follow the instructions listed under Replacement Parts, page 15. KEY NO. PART NO. DESCRIPTION qTY. 1 11889-01 Light Post Burner Bracket 1 2 1207-01 Top Light Burner Assembly 1 118904-01 Lightpost Burner Flex Line 1 4 120570-01 Ignitor Electrode Kit 1 5 121594-02 Thermocouple 1 6 119091-01 Lightpost Main Burner 1 7 118911-01 Main Burner Orifice 1 8 N
Inhaltszusammenfassung zur Seite Nr. 14
TROUbLESHOOTING WARNING: Never attempt to service heater while it is connected to propane/LP supply, operating, or hot. Severe burns can occur. SYMPTOM POSSIBLE CAUSE REMEDY Burner fails to light 1. Propane/LP supply valve 1. Open propane/LP supply closed on propane/LP cyl- valve slowly inder 2. Blockage in burner/orifice 2. Clean burner/replace orifice elbow/hose and regulator elbow/hose and regulator assembly assembly . Battery not installed, battery 3. Install new alkaline battery powe
Inhaltszusammenfassung zur Seite Nr. 15
REPLACEMENT PARTS Note: Use only original replacement parts. Usually, we will ask you to return the part to This will protect your warranty coverage for the factory. parts replaced under warranty. PARTS NOT UNDER WARRANTY PARTS UNDER WARRANTY Contact authorized dealers of this product. Contact authorized dealers of this product. If If they can’t supply original replacement they can’t supply original replacement part(s), part(s), call DESA Heating, LLC (US) at call DESA Heating, LLC at 1-866-
Inhaltszusammenfassung zur Seite Nr. 16
WARRANTy LIMITEd WARRANTy DESA Heating, LLC warrants this product and any parts thereof, to be free from defects in materials and workmanship for one (1) year for residential home owner usage or 90 days for commercial/industrial usage from the date of first purchase when operated and maintained in accordance with instructions. This warranty is extended only to the original retail purchaser, when proof of purchase is provided. This warranty covers only the cost of parts and labor required to r
Inhaltszusammenfassung zur Seite Nr. 17
CALENTADOR DE LÁMPARA DE PROPANO O GAS LP MANUAL DEL PROPIETARIO MODELOS TD100A, TD102A, TD104A y TD110A Configuración ajustable de la temperatura: Baja: 20,000 BTU Alta: 36,500 BTU ADVERTENCIA: para uso en exte- riores solamente ADVERTENCIA: lea y comprenda este manual antes de ensamblar, arrancar o dar servicio al calentador. El uso in- adecuado del calentador puede ocasionar lesiones graves, daños a la propiedad o la muerte. Conserve este manual para referencias futuras. INSTALADO
Inhaltszusammenfassung zur Seite Nr. 18
TAbLA DE CONTENIDO Seguridad ............................................................ 2 Diagrama de cableado ...................................... 12 Identificación del producto ................................... 5 Solución de problemas ...................................... 13 Desempaque del calentador................................ 5 Piezas ................................................................ 14 Ensamble............................................................. 5 Piezas d
Inhaltszusammenfassung zur Seite Nr. 19
SEGURIDAD Continuación 6. Mantenga el cilindro de propano o gas LP Asegúrese de leer y comprender todas las a menos de 38 °C (100 °F). advertencias. Conserve este manual como 7. Use sólo la manguera y el regulador referencia. Es su guía para la operación se- preinstalado en la fábrica que se incluyen gura y correcta de este calentador. con el calentador. No ajuste el regulador, 1. Instale y use el calentador con cuidado. ya que se podrían producir fugas de Siga todas las ordenanzas y los
Inhaltszusammenfassung zur Seite Nr. 20
SEGURIDAD Continuación 15. Cierre la válvula y el suministro de gas al No se debe colgar ropa ni otros calentador cuando no lo esté utilizando. materiales inflamables en el 16. Use sólo piezas de repuesto originales. calentador, ni se deben colocar Este calentador debe usar piezas diseña- das específicamente. No las sustituya ni cerca del mismo. use piezas genéricas. El uso de piezas de repuesto inadecuadas puede ocasionar La instalación y las reparaciones lesiones graves o fatales. deb
