Inhaltszusammenfassung zur Seite Nr. 1
Convection Plus Heaters
Instruction Booklet
HE3100 1200W heater with micathermic elements
HE3900 2200W heater with micathermic elements
Please read these instructions carefully
and retain for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Sunbeam’s Safety Precautions 1 Sunbeam’s Total Safety System 3 Features of your HE3100 Convection Plus Heater 4 Features of your HE3900 Convection Plus Heater 6 Using your Convection Plus Heater – HE3100 8 Using your Convection Plus Heater – HE3900 9 Wall Mounting and Attaching the Wheels 11 Care and Cleaning 12 Important instructions – retain for future use.
Inhaltszusammenfassung zur Seite Nr. 3
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when • Never leave an appliance unattended while designing and manufacturing consumer products, in use. but it is essential that the product user also • Do not use an appliance for any purpose exercise care when using an electrical appliance. other than its intended use. Listed below are precautions which are essential • Do not place an appliance on or near a hot gas for the safe use of an electrical appliance: flame, elect
Inhaltszusammenfassung zur Seite Nr. 4
Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid • Do not insert or allow foreign objects to enter burns, do not let bare skin touch hot surfaces. any ventilation or exhaust openings as this may If provided, use handles when moving this cause electric shock or fire, or damage to the heater. Keep combustible materials such as heater. furniture, pillows, bedding, papers, clothes and • To prevent a possible fire, do not block air curtains at least 3 feet (90cm) away
Inhaltszusammenfassung zur Seite Nr. 5
Sunbeam’s Total Safety System Safety auto shut-off Instant tip-over cut-out Your Sunbeam Convection Plus Heater is Your Sunbeam Convection Plus Heater is also equipped with a safety system that detects equipped with an instant tip over cut-out any abnormally high temperatures within the switch. This switch automatically interrupts heater and automatically cuts power to the the power flow to the heating element when heating element, preventing overheating. the heater is tilted to a certain an
Inhaltszusammenfassung zur Seite Nr. 6
Features of your HE3100 Convection Plus Heater Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly. Wall mountable The slim design is ideal for wall mounting. The unique reflective design keeps the rear of the heater cooler, enabling it to be mounted directly onto the wall, w
Inhaltszusammenfassung zur Seite Nr. 7
Power ON light Illuminates to indicate that the heater is switched on. Mode dial Turn the mode dial to select your desired setting: OFF, LOW (1) or HIGH (2). Thermostat indicator light The red thermostat light indicates that the heater is warming up to the selected temperature and will go out when the selected temperature has been reached. Thermostat dial Turn the thermostat dial clockwise to select your desired temperature. Adjustable thermostat The adjustable thermostat allows you to
Inhaltszusammenfassung zur Seite Nr. 8
HI C Features of your HE3900 Convection Plus Heater Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly. Safety auto shut-off This built-in safety system detects any abnormally high temperatures within the heater and automatically switches it off to prevent overheating. Insta
Inhaltszusammenfassung zur Seite Nr. 9
HI C Remote control The easy to use remote control enables the Figure 3 heater to be operated from anywhere in the room. LED screen The LED screen displays the current settings including the ambient room temperature, the selected mode, or timer setting. ON/OFF switch Illuminates to indicate that the heater is switched on. Mode button Press the mode button to select your desired operating mode: STANDBY, LO, HI or AUTO. Select the AUTO mode when setting the digital thermostat. Timer button
Inhaltszusammenfassung zur Seite Nr. 10
Using your Convection Plus Heater HE3100 – 1200W heater with micathermic elements 1. Place the heater on a flat level surface and 5. Turn the thermostat dial clockwise until ensure that the air intake and outlet are the red thermostat indicator light turns on, clear of obstructions. indicating that the heater is warming to the selected temperature. This light will go Note: When turned on for the first time, out when the selected temperature level is your new heater will emit a slight odou
Inhaltszusammenfassung zur Seite Nr. 11
Using your Convection Plus Heater continued HE3900 – 2200W heater with micathermic elements and remote control 1. Place the heater on a flat level surface and Using the remote control ensure that the air intake and outlet are The remote control allows you to conveniently clear of obstructions. operate the heater from anywhere in the room. (Refer to Note on Page 8). The buttons on the remote control are 2. Ensure that the ON/OFF switch is in the identical to the buttons on the heater. When
Inhaltszusammenfassung zur Seite Nr. 12
Using your Convection Plus Heater continued 3. Use the plus/minus arrows to select your 4. Once you have selected your desired timer desired setting. The LED screen will setting, the ambient room temperature and flash the set value for 5 seconds. After 5 the timer icon will display on the LED seconds the LED screen will display the screen. ambient room temperature. Note: When the time has run out, the Note: The temperature range is from 15ºC timer icon will cease to appear on the to 2
Inhaltszusammenfassung zur Seite Nr. 13
Wall Mounting and Attaching the Wheels Wall mounting ���� 1. Before wall mounting your heater, remove the wheels. 2. Mark the screw location on the wall, approximately 1 metre from the floor. Note: The heater must be fixed no lower ���� ���� than 6.5cm above the floor and no higher than 1.8 metres above the floor. The heater must also be fixed at least 1 metre from ���� both the corner and ceiling (refer to figure Figure 5 4 below). 3. Insert one of the screw anchors into Drill the
Inhaltszusammenfassung zur Seite Nr. 14
Care and Cleaning Ensure that the heater is switched off and Do not use harsh or abrasive cleaners to disconnected from the power outlet before clean your heater, as these will damage the cleaning. surface. Carefully wipe the exterior of the heater If not wall mounted, store the heater in a with a soft damp cloth and dry thoroughly cool dry place when not in use. with a dry cloth. Over time, dust may accumulate on the front grille. This can be removed by wiping with a damp cloth, or by
Inhaltszusammenfassung zur Seite Nr. 15
‘Sunbeam’, is a registered trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam’s 3 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2006. ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. For more information or advice on this or any other Sunbeam appliance, visit www.sunbeam.com.au or contact th
Inhaltszusammenfassung zur Seite Nr. 16
Consumer Hotline Australia 1800 025 059 New Zealand 0800 786 232 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ABN 45 000 006 771. © Sunbeam Corporation Limited 2006.
