Inhaltszusammenfassung zur Seite Nr. 1
User’s Guide
Shop online at
www.omega.com
e-mail: info@omega.com
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
WAVELENGTH 800-700 mm
POWER <1mW-CLASS IN LASER
PRODUCT, COMPLIES WITH 21
CFR CHAPTER 1, SUBCHAPTER J.
LASER RADIATION-
CLASS 2 LASER PRODUCT,
CONFORMS TO IEC825-1:1993
MADE IN TAIWAN
OS541
Infrared Thermometer
Inhaltszusammenfassung zur Seite Nr. 2
® OMEGAnet On-Line Service Internet e-mail www.omega.com info@omega.com Servicing North America: USA: One Omega Drive, Box 4047 ISO 9001 Certified Stamford CT 06907-0047 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1, Canada Tel: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca For immediate technical or application assistance: ® USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA ® Customer Service: 1-800-622-2378 / 1-
Inhaltszusammenfassung zur Seite Nr. 3
CONTENT Page I. SAFETY INFORMATION --------------------- 2 II. CAUTIONS --------------------------------------- 2 III. GENERAL SPECIFICATION ---------------- 3 IV. NAME AND FUNCTION ---------------------- 4 V. OPERATION INSTRUCTIONS: Measuring Trigger ---------------------------- 5 Distance to Spot Ratio (D/S) -------------- 5 Emissivity -------------------------------------- 5 Maintenance -----------------------------------
Inhaltszusammenfassung zur Seite Nr. 4
Infrared Recorder I. SAFETY INFORMATION • Read the following safety information carefully before attempting to operate or service the meter. • Only qualified personnel should perform repairs or servicing not covered in this manual. • Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this instrument. • Safety symbols: Dangerous, refer to this manual before using the meter. Apply with European CE. This instrument conforms to the following standar
Inhaltszusammenfassung zur Seite Nr. 5
Infrared Recorder • Away from electrical welders, induction heaters and EMF sources. • When using this thermometer under large or abrupt ambient temperature changes, allow 15 minutes for unit to stabilize before use. • Do not keep this thermometer in the environment of high temperature for a long time. • Keep away from dusty environment, and keep in carry case after operation to avoid contamination of optical lenses. III. GENERAL SPECIFICATION Display: 4 digit LCD Display Illumin
Inhaltszusammenfassung zur Seite Nr. 6
Infrared Recorder IV. NAME AND FUNCTION 1 SCAN CAUTION 7 2 LASER RADIATION - DO NOT STARE INTO BEAM OUTPUT < 1mW AT 630 670mm CLASS II LASER PRODUCT 5 OPEN LASER ON C 3 4 OFF F 6 1 2 Laser dot/circle switch Infrared sensor aperture 4 3 Laser on/off switch °C/°F switch 5 6 Measuring Trigger Battery cover 7 LCD display LCD Display Scan indication Laser on indication Data Hold indication SCAN Low battery HOLD Temperature unit indication Digital value indication 4
Inhaltszusammenfassung zur Seite Nr. 7
Infrared Recorder V. OPERATION INSTRUCTIONS • Measuring Trigger To measure a temperature, point the unit at an object and pull the trigger. Be sure to consider distance-to-spot size ratio and field of view. The laser is used for aiming the target for reference. When the laser is on, you can switch between laser dot and circle by moving a lever in front of optics. Laser dot is an indication of the center of the field of view. Laser circle is an indication of the perimeter of the field
Inhaltszusammenfassung zur Seite Nr. 8
Infrared Recorder • Emissivity Emissivity is a term used to describe the energy-emitting characteristics of materials. The higher of this value means the more capability of radiation emittance the materials has. Most organic materials and painted or oxidized surfaces have an emissivity of 0.98. Metal surfaces or shiny materials has a lower emissivity and give inaccurate readings. Please note this during applications. • Maintenance Blow off loose particles using a lens blow. Gently b
Inhaltszusammenfassung zur Seite Nr. 9
WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department w
Inhaltszusammenfassung zur Seite Nr. 10
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at www.omega.com TEMPERATURE Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies Wire: Thermocouple, RTD & Thermistor Calibrators & Ice Point References Recorders, Controllers & Process Monitors Infrared Pyrometers PRESSURE, STRAIN AND FORCE Transducers & Strain Gages Load Cells & Pressure Gages Displacement Transducers Instrumentation & Ac
