Inhaltszusammenfassung zur Seite Nr. 1
HV-G Series
HV-G Series
Platform Scales
Platform Scales
Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 2
1 Compliance ........................................................................................3 1.1 Compliance with FCC rules ...........................................................3 2 Outline and Features .........................................................................4 3 Unpacking ..........................................................................................5 3.1 Accessories and Options list .........................................................6 4 C
Inhaltszusammenfassung zur Seite Nr. 3
14 Calibration (Adjusting the Scale)......................................................39 14.1 The Gravity Acceleration Table ...................................................40 14.2 The Complete Calibration Procedure ..........................................41 14.2.1 Gravity Acceleration Correction ...............................................41 14.2.2 Preparation ..............................................................................41 14.2.3 Calibration of the Zero Point.......
Inhaltszusammenfassung zur Seite Nr. 4
Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has been tested and has been found to comply with the limits of a Class A computing device pursuant to Sub-part J of Part 15 of FCC rules. These rules are designed to provide reasonable protection against interfer- ence when this equipment is operated in a commercial environment. If this unit is operated in a residential area it might cause some inte
Inhaltszusammenfassung zur Seite Nr. 5
The HV-G series is a platform scale with 1/3000 resolution, and has a “triple weighing range” function to select the weighing range. Type L scales have an LCD (Liquid Crystal Display) and use batteries as a power source to provide portability. This type can also use an AC mains adaptor. Type V scales have a fluorescent display so the weighing value can be read in dim light. This type uses the AC power line as a power source. The base unit (platform) is water-resistant in
Inhaltszusammenfassung zur Seite Nr. 6
HV-G Instruction Manual Page 5
Inhaltszusammenfassung zur Seite Nr. 7
Accessories for HV-G series Type Products Accessories HV-15KGV Display unit cover Instruction manual Type V HV-60KGV Display unit cover HV-200KGV 5mm Allen wrench Instruction manual HV-15KGL Display unit cover AC adaptor 6 x ‘D’ size batteries Instruction manual 6 x ‘D’ size batteries Type L HV-60KGL Display unit cover HV-200KGL 5mm Allen wrench AC adaptor Instruction manual HV-G Instruction Manual Page 6
Inhaltszusammenfassung zur Seite Nr. 8
Options List Order code or option name Accessories OP-03 RS232C interface / Relay output / Buzzer Connector JA:TCP0586 OP-04 RS422/485 interface / Relay output Connector TM:BLA9 AC adaptor OP-06 Built-in printer for type V Paper PP156 Ink ribbon ERC-05 AX-K0557A RS232C cable, D-sub 25 pin, 2m AX-KO1786-200 RS232C cable, D-sub 9 pin, 2m Consumables AX-PP156 Special roll paper AX-ERC-05 Ink ribbon HV-G Instruction Manual Page 7
Inhaltszusammenfassung zur Seite Nr. 9
!
Consider the following conditions to get the most from your scale. The best operation is where the temperature and relative humidity are stable, the scale is installed on a solid floor or bench and there is no draft. Do not install the scale in direct sunlight. Do not install the scale near heaters or air conditioners. Do not install the scale where there is flammable or corrosive gas present. Do not install the scale near equipment which pro
Inhaltszusammenfassung zur Seite Nr. 10
"
!
This procedure includes all of the steps for installing the HV-G series scales Step 1 Unpacking Remove the base unit and column from the carton, taking care not to pull on the loadcell cable. Step 2 Fit the pan to the base unit. Step 3 Insert the excess loadcell cable into the column. Attach the column to the base unit so as not to damage the loadcell cable. Affix the column to the bracket using four 5mm Allen screws. Step 4 Select the place for installing the scale. Cons
Inhaltszusammenfassung zur Seite Nr. 11
"
#
$% & Step 1 Turn off the display. Remove the AC adaptor. Step 2 Press and slide to open the external cover. Press the hook of the internal cover to the left side and lift the cover. Step 3 Insert six new dry cells ensuring correct polarity (+,-). Battery size is ‘D’. Step 4 Close the covers opened in step 2. Caution Replace used dry cells with six new ones, when BATT is displayed. Do not mix used and new batteries. It may cause damage to the battery or product.
Inhaltszusammenfassung zur Seite Nr. 12
' (
HV-G Instruction Manual Page 11
Inhaltszusammenfassung zur Seite Nr. 13
' )
%
!% * Stability mark. When the current weight value is not changing, this mark is displayed. The reading may now be taken. Zero point mark. With nothing on the pan and pressing the ZERO switch, this mark is displayed. The zero point is the starting point to weighing. Net mark. After pressing the TARE switch this mark is displayed to show net weight is displayed Preset tare mark. When storing a tare with digital input this mark blinks. Accumulation mark. When using the acc
Inhaltszusammenfassung zur Seite Nr. 14
Example:-. Display of the counting mode. This mode uses the registered unit mass, counts the amount of articles on the pan. The unit is PCS. Example:- Storing the unit mass in the counting mode. This is a display of zero point for counting mode and uses 20 pieces for the unit mass registration. Example:- Storing the unit mass in the counting mode. Sign “-” means “weighing value is not zero”. Sample number is 10 pieces. Example:- Percentage mode. This mode uses the registered 100% mass, converts
Inhaltszusammenfassung zur Seite Nr. 15
Calibration error. Means “Calibration mass is too heavy”. Check the base unit and weighing pan. Weighed value is unstable due to drift, vibration etc. when turning on the scale. Check around the weighing pan. Check the connection of load cell cable. Remove everything from the weighing pan. Check around weighing pan. Perform zero point calibration of the scale. Accumulated data count Total mass value of the accumulated data. Comparator function = display is an upper limit. Full/dribble batch f
Inhaltszusammenfassung zur Seite Nr. 16
Set switch. Can be used to turn the comparator on/off. (Refer to ) Counting mode, it is used to enter the mode to store the unit mass. Percentage mode, it is used to enter the mode to store the 100% mass. In the full/dribble batch function, it is used as a start switch. In the preset tare, and selecting calibration mass, it is used to select a figure. Mode switch. Used to change the current unit. While setting modes, this switch is used for “storing a parameter and proceeding the next step”.
Inhaltszusammenfassung zur Seite Nr. 17
+ #
+$ !
, -#
. 7.1.1 Type V or Type L with AC adaptor Step 1 Connect the scale to a ground point. Step 2 Ensure that the pan is empty. Step 3 Confirm that local voltage and receptacle type fit your scale. Step 4 The scale turns on/off using the ON/OFF switch alternately. Step 5 Check the accuracy of weighing. If you calibrate the scale, perform it after allowing the scale to warm up for 30 minutes. Step 6 Press the ZERO switch to display zero.
Inhaltszusammenfassung zur Seite Nr. 18
7.1.2 Type L with Batteries Step 1 Install six new batteries. Refer to “5.1. Installing the batteries for Type L”. Step 2 Ensure that the pan is empty. Step 3 The scale turns on/off using the ON/OFF switch alternately. Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after warming up the scale for 30 minutes. Step 5 Press the ZERO switch to display zero. (With nothing on the pan.) Step 6 Place something on the pan gently. Step 7 You can read the weight value afte
Inhaltszusammenfassung zur Seite Nr. 19
+ $
0
()
%1 The “Tare” is used to cancel the mass of a container, receptacle, case, bag, etc. which is put on the pan to contain the item to be weighed. Caution The tare reduces the available weighing range. The current tare value is reset by pressing the ZERO switch or turning the scale off. (Reset value is zero.) Storable preset tare value is within minimum weighing range for the HV-G se- ries. +! /
$
0 *%. 1 Step 1 Put the container onto the pa
Inhaltszusammenfassung zur Seite Nr. 20
+. 3
This is the function to select a weighing range. The mass value is displayed within a selected range. There is the automatic range () and manual range () using the RANGE switch. Operation and Performance Function Table Meaning and purpose Automatic range Weighing range changes automatically as items are placed onto the pan. When there is nothing on the pan and the zero point mark is displayed, the scale changes back to the minimum range automatically Press the
