Bedienungsanleitung Husky 16628

Inhaltszusammenfassung zur Seite Nr. 1

Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet.
07/31/2006
COMBINATION 8X8 and 10X8 FLOOR KIT
This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size
FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY
This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages
of this instruction manual to build the floor size needed. If constructing an 8X8 storage

Inhaltszusammenfassung zur Seite Nr. 2

Parts Needed: FLOOR KIT INSTRUCTIONS A 2 - 48x92-5/8x5/8" Floor Panels C 5 - 2x4x89-1/2" Floor Joist FOR 8X8 BUILDINGS D 2 - 2x4x72" Bond Boards F 2 - 2x4x24" Bond Boards ACTUAL SIZE 96” WIDE x 92-5/8” DEEP - 2" and 3" Nails NOTE: Part letters are Not stamped on floor kits. ASSEMBLY OF 8’ x 92-5/8” FLOOR FRAME IMPORTANT! If you will be storing heavy items (such as lawn tractor, motorcycle, snowmobile etc.) we recommend you upgrade from 24” on center (61 cm) to 12” on center (30.5cm) floor f

Inhaltszusammenfassung zur Seite Nr. 3

8X8 FLOOR KIT INSTRUCTIONS CONTINUED FLOOR PANEL ATTACHMENT: C: Position a 48 x 92-5/8” Floor A Panel flush to the outside edges of sides and back of C Floor Frame. Secure panel with two 2” nails at outside corners and one 2” nail at other 92-5/8" corners. A C F D 96" Nails every 12" (30 cm) through Floor Panels into all Floor Bond Boards and Floor Joists D: Position the other 48” x 92-5/8” D Floor Panel flush against A first panel and flush to edges of Floor Frame. Secure panel w

Inhaltszusammenfassung zur Seite Nr. 4

Parts needed to cut: B 8X8 OPTIONAL SHELF 1 - 23-7/8x92-5/8x5/8" Floor Panel C 1 - 2x4x89-1/2" Floor Joist INSTRUCTIONS E 2 - 2x4x48" Bond Boards - 2" and 3" Nails Cut Cut A C B C (1) - 89-1/2" Board cut down to 88" (1) - 23-7/8x92-5/8" Panel cut do B wn to 23-7/8x89-1/2" Cut E (2) - 48" Board cut do E wn to 2 pieces of 24-11/16 and 23-3/16" SHELF PARTS TO CUT: A: Cut the 89-1/2” Board C 24-11/16" 23-3/16" down to 88”. Cut both 48” B 23-3/16" boards at 24-

Inhaltszusammenfassung zur Seite Nr. 5

Parts Needed: A 2 - 48x92-5/8x5/8" Floor Panels FLOOR KIT INSTRUCTIONS B 1 - 23-7/8x92-5/8x5/8" Floor Panel C 6 - 2x4x89-1/2" Floor Joist FOR 10X8 BUILDINGS D 2 - 2x4x72" Bond Boards E ACTUAL SIZE 120” WIDE x 92-5/8” DEEP 2 - 2x4x48" Bond Boards - 2" and 3" Nails NOTE: Part letters are Not stamped on floor kits. ASSEMBLY OF 10’ x 92-5/8” FLOOR FRAME IMPORTANT! If you will be storing heavy items (such as lawn tractor, motorcycle, snowmobile etc.) we recommend you upgrade from 24” on center (

Inhaltszusammenfassung zur Seite Nr. 6

10X8 FLOOR KIT INSTRUCTIONS CONTINUED FLOOR PANEL ATTACHMENT: C: Position a 48 x 92-5/8” Floor C Panel flush to the outside A edges of sides and back of Floor Frame. Secure panel with two 2” nails at outside corners 92-5/8" C A and one 2” nail at other corners. D: Position the other 48” x 92-5/8” Floor Panel flush against A first panel and flush to edges of Floor Frame. Secure panel with E D 120" one 2” nail at each of the four corners. E: Position the 23-7/8” x 92-5/8” B Floor Pa

Inhaltszusammenfassung zur Seite Nr. 7

NOTES: 7

Inhaltszusammenfassung zur Seite Nr. 8

NOTES: 8