Inhaltszusammenfassung zur Seite Nr. 1
1 Liter Abrasive Blast Gun
Item 92857
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
© ®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced
Inhaltszusammenfassung zur Seite Nr. 2
Save This Manual Work Area Keep this manual for the safety warnings and a. Keep the work area clean and well lighted. precautions, assembly, operating, inspection, Cluttered benches and dark areas increase the maintenance and cleaning procedures. Write the risks of electric shock, fire, and injury to persons. product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase b. Do not operate the tool in explosive atmospheres, if product has no nu
Inhaltszusammenfassung zur Seite Nr. 3
and release the throttle and/or turn the switch to its off position before leaving the work area. Symbols and Specific Safety Instructions c. Store the tool when it is idle out of reach of children and other untrained persons. Symbol Definitions A tool is dangerous in the hands of untrained users. Symbol Property or statement d. Check for misalignment or binding of moving parts, breakage of parts, and any other condition No-load speed n o that affects the tool’s operation. If damaged, have
Inhaltszusammenfassung zur Seite Nr. 4
to reduce crystalline silica exposures in the workplace Specific Safety Instructions and prevent silicosis and silicosis related deaths. 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and NIOSH recommends the following measures to situations that may occur. It must be understood reduce crystalline silica exposures in the workplace by the operator that common sense and caution and prevent silicosis and silicosis-related deaths: are factors which
Inhaltszusammenfassung zur Seite Nr. 5
3. Attach an air hose to the compressor’s air outlet. Functional Description Connect the air hose to the air inlet of the tool. Other components, such as a coupler plug and quick coupler, will make operation more efficient, but are not required. Specifications WARNING! TO PREVENT SERIOUS INJURY Max. Air Pressure 145 PSI FROM ACCIDENTAL OPERATION: Air Inlet 1/4 IN. - 18 NPT Do not install a female quick coupler on the tool. Container Capacity 1 Liter Such a coupler contains an air valv
Inhaltszusammenfassung zur Seite Nr. 6
Page 6 For technical questions, please call 1-800-444-3353. SKU 92857 Figure A: Portable Air Supply Setup C Lubricated B D A E F Tools A E H Non-lubricated C Tools B G A Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Regulator Adjusts air pressure to tool D Lubricator (optional) For air tool lubrication E Coupler and Plug Provides quick connection and release F Leader Hose (optional) Increases coupler life G Air
Inhaltszusammenfassung zur Seite Nr. 7
SKU 92857 For technical questions, please call 1-800-444-3353. Page 7 Figure B: Stationary Air Supply Setup Slope Lubricated Tools J G C K F H L M C D E I L O C J B B F A A I N F H Non-lubricated Tools Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts Secures air compressor in place C Ball Valve Isolates sections of system for maintenance D Isolation Hose For vibration reduction E Main Air Line - 3/4” minimum recommended Distributes air to branch line
Inhaltszusammenfassung zur Seite Nr. 8
General Operating Instructions Operating Instructions 1. If possible, place the workpiece inside a sandblast cabinet (not included). Otherwise, isolate the Read the ENTIRE IMPORTANT workpiece to make sure no damage can occur to SAFETY INFORMATION section at the nearby walls, tools, equipment, or other property. beginning of this manual including all text under subheadings therein 2. Fill the Container (3) with 1 liter of clean, dry blasting before set up or use of this product. media.
Inhaltszusammenfassung zur Seite Nr. 9
using only pneumatic tool oil. Lubricate the internal User-Maintenance Instructions mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. Procedures not specifically explained in this manual must be performed Cleaning, Maintenance, only by a qualified technician. and Lubrication Note: These procedures are in addition to the TO PREVENT SERIOUS INJURY FROM regular checks and maintenance explained as part
Inhaltszusammenfassung zur Seite Nr. 10
Parts List and Assembly Diagram Part Description Qty 1 Gun Body 1 2 Nozzle 1 3 Container 1 4 Hook 1 4 1 2 3 Page 10 For technical questions, please call 1-800-444-3353. SKU 92857
Inhaltszusammenfassung zur Seite Nr. 11
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
Inhaltszusammenfassung zur Seite Nr. 12
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
