Inhaltszusammenfassung zur Seite Nr. 1
© 2004
Philips Consumer Electronics
Home communication
All rights reserved
Printed in Hungary
www.philips.com
User Manual
GB
3111 285 22421
IRL
Inhaltszusammenfassung zur Seite Nr. 2
DECT5150_UK.qxd 28/06/04 16:47 Page 1 Conformity, Environment and Safety Safety information: this equipment is not designed to make emergency calls when power fails. An alternative should be made available for access to emercgency calls. Conformity : See page 12.A copy of the original certificate can be obtained on request to the customer care centre. Power requirements: this product requires an electrical supply of 220-240 volts, alternating monophased current, excluding IT installations def
Inhaltszusammenfassung zur Seite Nr. 3
DECT5150_UK.qxd 28/06/04 16:47 Page 2 Line key - Press to take the line, Pilot key answer a call or hang up. Press to enter the carousel or Clear/Recall select a menu or an option - To correct a digit when Scroll to move through the predialling or a character menus & options or move the when editing cursor left or right - A short press to go back one menu when navigating Scroll up to reach Call log - Long press to return to from idle mode Earpiece idle mode when navigating Scroll down to reac
Inhaltszusammenfassung zur Seite Nr. 4
DECT5150_UK.qxd 28/06/04 16:47 Page 3 The handset display The display gives information about the operation of your telephone On first use, it is sometimes necessary to wait for a few minutes of charge before seeing icons on the display. When charging, the battery bars scroll from empty to full status. When the handset discharges, the battery shows the status : Full , 2/3 , 1/3 and empty . The answer machine is activated (DECT 515). When blinking, this symbol indicates that there is a new mes
Inhaltszusammenfassung zur Seite Nr. 5
DECT5150_UK.qxd 28/06/04 16:47 Page 4 Installing and replacing the batteries in the handset To insert the batteries, open the battery cover, place the batteries as indicated and put the battery cover back.When the handset is placed on the base station the 3 battery bars scroll (if charge is needed).Allow the handset to charge for 24 hours to reach full charge. On first use it may be necessary to wait for a few minutes before seeing symbols on the display. In case you need to change the batter
Inhaltszusammenfassung zur Seite Nr. 6
DECT5150_UK.qxd 28/06/04 16:47 Page 5 Handset Registration The additional handset will get full capability when it is registered to the base station (see p. 1). You can register up to 6 handsets to the DECT 511 or DECT 515 base station. To register a handset Unplug and plug back in the mains supply to put the base in registration mode With the additional handset, press to start the registration Enter the 4-digit RC code written on the sticker placed under the base station and press OK To unr
Inhaltszusammenfassung zur Seite Nr. 7
DECT5150_UK.qxd 28/06/04 16:47 Page 6 Rename handset To rename a handset Press to enter the carousel menu Scroll to Handset and select Scroll to Rename handset and select Long press to delete the current name Enter the name and press OK Language To change the language Press to enter the carousel menu Scroll to Handset and select Scroll to Language and select Browse through the list and select Date & time To set the date and time Press to enter the carousel menu Scroll to Handset and sele
Inhaltszusammenfassung zur Seite Nr. 8
DECT5150_UK.qxd 28/06/04 16:47 Page 7 Display contrast To set the display contrast Press to enter the carousel menu Scroll to Handset and select Scroll to Display contrast and select Browse through the levels and select the appropriate one Backlight To set the display backlight duration or deactivate it Press to enter the carousel menu Scroll to Handset and select Scroll to Backlight and select Browse through the durations OFF / 10 seconds / 20 seconds and select Screen saver After 2 min
Inhaltszusammenfassung zur Seite Nr. 9
DECT5150_UK.qxd 28/06/04 16:47 Page 8 Intercom Using the Intercom (if there are at least 2 handsets) This feature allows you to make free internal calls, transfer external calls from one handset to another, use the conference option and the babysit feature (room monitoring). Internal call Press to call the selected handset + handset number (for example ) Hang up Note: if the handset does not belong to the Philips DECT 511/515 range, this function may not be available. Fast call transfer when
Inhaltszusammenfassung zur Seite Nr. 10
DECT5150_UK.qxd 28/06/04 16:47 Page 9 The called handset rings.The external call is put on hold. If there is no answer from the called handset you can resume the call on the first handset. Take the line on the called handset, both internal callers can talk Press to select Transfer (with handset 1) Scroll to Switch and come back to the external caller Note: to answer the call on the second handset you can press . Conference call via the in-call options Conference call allows one external call
Inhaltszusammenfassung zur Seite Nr. 11
DECT5150_UK.qxd 28/06/04 16:47 Page 10 Sounds Setting the handset sounds The ringers can be set for: - the external standard ringer for callers whose number is not stored in the phonebook or stored with no group settings. - the internal ringer for the intercom (if there are at least 2 handsets). To set the 3 group ring tones see manual DECT 511 / DECT 515. To set the earpiece tone, the key and feedback tones and to activate/deactivate the notification beeps, go to the menu Sounds and to the s
Inhaltszusammenfassung zur Seite Nr. 12
DECT5150_UK.qxd 28/06/04 16:47 Page 11 Troubleshooting Problem Cause Solution The handset is out of range, Move closer to the base station and try again ( is not displayed). The handset has not been Register the handset to the registered to the base station base station (page 5) ( is not displayed). No dial tone. The base station is not Check the connections properly connected to the mains or the telephone line. The batteries are low ( is Charge batteries (page 4) displayed). The charging uni
Inhaltszusammenfassung zur Seite Nr. 13
DECT5150_UK.qxd 28/06/04 16:47 Page 12 Declaration of conformity We, PHILIPS Consumer, Electronics Route d’Angers 72081 Le Mans Cedex 9 France Declare that the products DECT 511xx and DECT 515xx are in compliance with the Annex III of the R&TTE-Directive 1999/5/EC and then with the following essential requirements : Article 3.1.a (protection of the health & the safety of the user): EN 60950 (10/2001) Article 3.1.b (protection requirements with respect to electromagnetic compatibility) ETSI EN
Inhaltszusammenfassung zur Seite Nr. 14
© 2004 Philips Consumer Electronics Home communication All rights reserved Printed in Hungary www.philips.com User Manual GB 3111 285 22421 IRL
