Bedienungsanleitung Axor Hansgrohe Bodyvette Bodyspray 284466XX1

Inhaltszusammenfassung zur Seite Nr. 1

Installation Instructions / Warranty
Bodyvette
28466XX1

Inhaltszusammenfassung zur Seite Nr. 2

Bodyvette Bodyspray 28466XX1 Installation Specification Flow rate @ 45 psi 2.0 gpm Required tools Adjustable wrench Teflon tape Waterproof bathroom sealant Bodyspray Placement Custom showers are sized to the user(s). Bodysprays are normally placed at the upper back, middle back, and upper thigh. Always position bodysprays according to the preferences of the user(s). Pressure Balancing Loop If installing bodysprays in If installing bodysprays in a bank of 3 or fewer, a a bank of four or more

Inhaltszusammenfassung zur Seite Nr. 3

Installation Instructions Install a 1/2” male threaded pipe fitting, recessed 3/8” behind the surface of the finished wall. Wrap the threads with Teflon tape. Place the sealing gasket and escutcheon against the wall. Screw the spray body through the escutcheon and gasket, and onto the male pipe fitting. If the pipe fitting is recessed properly, the spray body will hold the escutcheon firmly against the wall. Screw the base body over the spray body. Push the sprayhead firmly over the sp

Inhaltszusammenfassung zur Seite Nr. 4

Secure in place with the white c-clip. Cover the c-clip with the cover. TM The Rubit Self-Cleaning System TM TM The Bodyvette bodyspray uses the Rubit self-cleaning system. If scale deposits are noticed in the spray channels, turn the water on lightly and rub across the spray channels with a finger or a sponge to dislodge the deposits. 4

Inhaltszusammenfassung zur Seite Nr. 5

Replacement Parts 5 2 3 4 1 1 sprayhead 95066XX0 2 escutcheon 95060XX0 3 cover 96434000 4 base body 97521XX0 5 o-ring 98105000 3.5 x 1.5 5

Inhaltszusammenfassung zur Seite Nr. 6

Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the follow- ing points when cleaning fauce

Inhaltszusammenfassung zur Seite Nr. 7

THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no-rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. (3)

Inhaltszusammenfassung zur Seite Nr. 8

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.com US - Installation Instructions • Part No.90802301 • Revised 08/2007