Inhaltszusammenfassung zur Seite Nr. 1
ProSweep Attachment
Model 99944200553
Operator's Manual
FOR MODELS: SRM-2400SB
SRM-260SB/261SB
PAS-2400
PAS-230/231
PAS-260/261
PAS-2601
PAS-265
ENGLISH
ESPAñOL
FRANCAIS
wArning
Read rules for safe operation and instructions carefully. ECHO provides an Op-
erator's Manual with this attachment and a separate Operator's Manual and Safety
Manual (if available) with the Power Head. All manuals must be read and under-
stood for proper and safe operation. Failure to do so co
Inhaltszusammenfassung zur Seite Nr. 2
2 Introduct Ino Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual included with your attachment. You will find this manual easy to use and full of helpful operations tips and SAFETY messages. teh ort oprae 's manual Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation, starting, stoppi
Inhaltszusammenfassung zur Seite Nr. 3
Pro Swee P Att Achmtne 3 o Per A or t 'S m Aun Al s afety lmanua safety symbosl and I nat rtpmo I t normaf Ion Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre- ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. CIRCLE AND SLASH SyMBOL DAngEr This symbol means the specific action The safety alert symbol accompanied by the word shown is prohibited.
Inhaltszusammenfassung zur Seite Nr. 4
4 Physical Condition Your judgment and physical dexterity may not be good: • if you are sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the ProSweep attachment. Hand Protection Wear no-slip, heavy duty work gloves to improve your grip on the Pro Attachment Seri
Inhaltszusammenfassung zur Seite Nr. 5
Pro Swee P Att Achment 5 o Per A or t 'S m Aun Al Repetitive Stress Injuries -- It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve
Inhaltszusammenfassung zur Seite Nr. 6
6 equ Ipmetn wArning Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product. Before operation a complete check of the unit must be performed; • ECHO, INC. will not be responsible for the failure of sweeping devices, accessories and parts which have not been tested and approved by ECHO for use with this ProSweep Attachment. • Check unit for loose/missing nuts, bolts and screws. Tighten and/or
Inhaltszusammenfassung zur Seite Nr. 7
Pro Swee P Att Achtenm 7 o Per A or t 'S m Anu Al d scre Ipt Ion Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 3 2 1 4 P/n 89016025560 1. BRUSHES - Permanently attached to drum holders and come standard with 0.5 mm (0.018 in.) diameter nylon bristles. Optional .7 mm (0.028 in.)
Inhaltszusammenfassung zur Seite Nr. 8
8 c stnetno After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. ___ 1 - Brushes / Gear Housing Assembly ___ 1 - Lower Drive Shaft Assembly ___ 1 - Operators Manual ___ 1 - Warranty Registration Card ___ 1 - Storage Hook Assembly a y lbmess wArning Do not perform maintenance or assembly procdures with engine running. Tools Required: 4 & 5 mm Hex Wrench Parts Required: P
Inhaltszusammenfassung zur Seite Nr. 9
Pro Swee P Att Achmetn 9 o Per A or t 'S m Anu Al owerp head tsafh /lower hftas y bmessal B 1. Turn gear housing assembly over so that gear housing mounting D bolt (E) faces upward. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. A CAUTION Thrown objects hazard. Install lower drive shaft so that gear hous- ing mounting bolt (E) faces upwards. Otherwise debris will be thrown toward user. 3. Remove cardboard spacer from coupler, if necessary. 4. Careful
Inhaltszusammenfassung zur Seite Nr. 10
10 o t prae Ion wArning Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. NOTE Refer to your Pro Attachment Series or Split Boom Operator's Manuals for correct engine fueling, starting and stop- ping instructions. 1. Hold unit on your right side resting
Inhaltszusammenfassung zur Seite Nr. 11
Pro Swee P Att Achtenm 11 o Per A or t 'S m Anu Al m a Inenancet wArning Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. Your ECHO attachmen
Inhaltszusammenfassung zur Seite Nr. 12
12 Drive Shaft A IMPORTANT Lower and upper drive shaft must be lubricated with POWER TM BLENDX grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Remove gear housing locator screw (A). 2. Loosen gear housing mounting bolt (B). B 3. Pull gear box from drive shaft housing. 4. Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of POWER BLEND- TM X . 5. Slide the flexible cable bac
Inhaltszusammenfassung zur Seite Nr. 13
Pro Swee P Att Achtenm 13 o Per A or t 'S m Anu Al brush retlacemenp Level 1. Tools Required: 8 mm Open End Wrench, Cross Head Screwdriver Parts Required: Standard Brush Assy .018 in. P/N 99944200551 QTY (2) Optional Brush Assy .028 in. P/N 25020225661 QTY (2) Brushes that are broken off, deformed, or worn to within 25.4 mm (1 in.) of the brush holder drum should be replaced for best sweeping efficiency. 1. Locate brush holder access hole (A) near outer drum end. A 2. Ho
Inhaltszusammenfassung zur Seite Nr. 14
14 s oraget 1. Clean ProSweep attachment bristles with water. IMPORTANT Do not immerse this attachment in water. Water will enter gear housing and damage gears, bearings and seals. 2. Apply thin coating of oil to metal parts to prevent rust. 3. Lubricate lower shaft assembly with grease. (Refer to Lubrication instructions.) 4. Store ProSweep attachment in a dry place out of reach of children. Do not store attachment with the weight resting on brushes which could bend over a long period of
Inhaltszusammenfassung zur Seite Nr. 15
Pro Swee P Att Achment 15 o Pre A or t 'S m Aun Al tnoe
Inhaltszusammenfassung zur Seite Nr. 16
s v er Ic Ing I t nforma Ino rtsa p /ser Ial numreb Genuine ECHO Parts and ECHO REPOWER™ Parts and Assem- blies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. _____________ SN. ____________ v ser Iec Service of thi
