Bedienungsanleitung Pfaff Embroidery Machine

Inhaltszusammenfassung zur Seite Nr. 1

Embroidery preparations

Inhaltszusammenfassung zur Seite Nr. 2

B F A E B D C Embroidery unit overview (type BE15) A Embroidery unit release button B Level adjusting feet C C Embroidery unit accessory tray D Embroidery unit socket E Embroidery hoop connection assembly F Embroidery arm Note: A smaller embroidery unit, 260x200mm, is available to purchase at your local authorized PFAFF® dealer. Embr oidery unit accessory tray Use the tray in the embroidery unit to store accessories used for embroidering. Built-in designs L Over 200 designs are included i

Inhaltszusammenfassung zur Seite Nr. 3

Embroidery Mode - Preparations creative vision™ Embroidery collection Page through the creative vision™ Embroidery collection for designs and fonts. The design number, stitch count (number of stitches in the design) and the design size are displayed next to each design. The suggested thread colors for each color number are shown. Connect the embroidery unit There is a covered socket behind the free-arm, see picture. The cover will open automatically when connecting the embroidery unit.

Inhaltszusammenfassung zur Seite Nr. 4

To hoop the fabric For the best embroidery results, place a layer of stabilizer beneath the fabric. When hooping stabilizer and fabric make sure that they are smooth and securely hooped. 1. Open the quick release (A) on the outer hoop. Remove the inner hoop. Place the outer hoop B on a fi rm fl at surface with the screw on the A lower right. There is a small arrow in the center of the lower edge of the hoop which will line up with a small arrow on the inner hoop. 2. Place stabilizer and t

Inhaltszusammenfassung zur Seite Nr. 5

Embroidery Mode - Preparations Getting started embroidering 1. After attaching the embroidery unit and embroidery foot, insert a bobbin with lightweight bobbin thread. Note: Make sure that the IDT is disengaged. 2. Hoop a piece of fabric and slide on the hoop. 3. Open selection menu (A) to select a design. Touch it once to load to embroidery edit. 4. The machine automatically switches to embroidery edit. The design is placed in the center of the hoop. BA 5. Switch from embroidery edit

Inhaltszusammenfassung zur Seite Nr. 6

7. Clear suffi cient space to accommodate D movement of the embroidery arm and the hoop. Hold the needle thread and touch the start/stop button (D) or the foot control. The machine starts embroidering. 8. After stitching a few stitches, the machine stops and a pop-up appears on the screen asking you to cut the thread end. Cut the thread and press start/stop to continue embroidering. 9. When the fi rst color is completed, your machine stops. A pop-up appears asking you to change color. Re