Inhaltszusammenfassung zur Seite Nr. 20
Shows the side of the tape and the program number for the Display information during programming track to be programmed next. Shows the selected disc and track number. ` Shows the total remaining time on the side of the tape. ´ PROG Programmed track numbers light up and programmable ˆ TOTAL track numbers among the unprogrammed ones flash on REMAIN and off. 1 2 3 4 5 6 7 8 9 10 * If “A-01” does not appear in the display after the PROG button is pressed, press the TIME display mode-
Inhaltszusammenfassung zur Seite Nr. 1
CDC-655/555
Natural Sound Compact Disc Player
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
CONTENTS
Safety Instructions......................................... 2
Index Search ............................................... 16
Features ........................................................ 4
CD Synchronized Recording ...................... 17
Connections .................................................. 5
Track Programming for Recording to Tape
Identification of C
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY INSTRUCTIONS 9 Heat – The unit should be situated away from heat CAUTION sources such as radiators, stoves, or other appliances that produce heat. RISK OF ELECTRIC SHOCK DO NOT OPEN 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 11 Power-Cord Protection – Power-supply cords should be PARTS I
Inhaltszusammenfassung zur Seite Nr. 3
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual 9. To prevent damage by lightning, disconnect the power cord from the household AC outlet during an electrical carefully. Keep it in a safe place for future reference. storm. 2 Install your unit in a cool, dry, clean place – away from 10. When disconnecting the power cord from the household windows, heat sources, and too much vibration, dust, AC outlet, grasp the plug; do not pull the cord.
Inhaltszusammenfassung zur Seite Nr. 4
FCC INFORMATION 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product This product, when installed as indicated in the is found to be the source of interference, which can be instructions contained in this manual, meets FCC determined by turning the unit “OFF” and “ON”, please try requirements. Modifications not expressly approved by to eliminate the problem by using one of the fo
Inhaltszusammenfassung zur Seite Nr. 5
CONNECTIONS l l Before making any connections, switch OFF the power to If the placement of this unit causes noise to other the unit and the amplifier or other component. equipment, such as a tuner, separate them from each other. l Connections should be made to the correct input terminals of the amplifier or other component. CDC-555 LINE OUT L R To AC outlet CDC-655 LINE OUT DIGITAL AUDIO OUT OPTICAL L R To AC outlet ¸ Optical fiber cable (not included) Connection cord (included) ˚ Amplifier OPT
Inhaltszusammenfassung zur Seite Nr. 6
IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control part is best described. FRONT PANEL * Control functions other than shown below are the same with * The PLAY/PAUSE button on the main unit has both the the corresponding ones on the remote control transmitter. functions of the PLAY button and the PAUSE button on the remote control transmitter. * The SKIP/SEARCH button on the main unit has both the functions of the SKIP buttons and the SEARCH buttons on the remot
Inhaltszusammenfassung zur Seite Nr. 7
* ( ) indicates the page number on which the control is best described. REMOTE CONTROL TRANSMITTER CDC-655 DIMMER button (p. 12) TAPE TAPE button (p. 18) CDC-555 CLEAR CLEAR button (p. 15) TIME button (p. 11) REPEAT button (p. 16) OPEN/CLOSE DIMMER TIME OPEN/CLOSE button (p. 8) PROG REPEAT RANDOM PROG button (p. 14) RANDOM button (p. 13) 12 3 MODE Disc play MODE-select button 4 56 +10 (p. 8) Numeric buttons (p. 10) 78 9 0 DISC SCAN button (p. 11) DISC SKIP DISC PAUSE button (p. 9) DISC SKIP
Inhaltszusammenfassung zur Seite Nr. 8
This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION CDC-655 CDC-555 OPEN/CLOSE DIMMER TIME OPEN/CLOSE TIME DIMMER 2, 3 2, 3 REPEAT RANDOM PROG TAPE PROG CLEAR REPEAT RANDOM 12 3 MODE 12 3 MODE 4 4 4 56 +10 4 56 10 + 78 9 0 78 9 0 DISC SKIP DISC SKIP DISC DISC SCAN SCAN 5 PAUSE PLAY PAUSE PLAY 5 SKIP SKIP 5 5 SEARCH INDEX STOP SEARCH INDEX STOP 1 4 1 Se
Inhaltszusammenfassung zur Seite Nr. 9
Notes Display information at disc play l After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number `´ˆ of tracks and the total recorded time of the selected disc for a few seconds. 5DISC REMAIN 5DISC 3 4 5 6 7 8 9 10 1 1 12 TOTAL 1 2 3 4 5 6 7 8 9 10 1 1 12 l ˜ ¯ Additionally, you can close the disc tray by pressing the PLAY(PLAY/PAUSE) button, a DISC-sele
Inhaltszusammenfassung zur Seite Nr. 10
To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track by using the numeric buttons. To play from the beginning of the track following the one now playing SKIP 5 To play from the beginning of the track now playing SKIP 1DISC The selected track number is displayed. 5 6 7 8 9 10 1 1 12 To play from the beginning of the track before the one now playing Example: To select track 25 SKIP Press twice, then immediately press once. ` 10 5 (Twice) l ` These operatio
Inhaltszusammenfassung zur Seite Nr. 11
Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed while this unit is stopped, this unit will play an early part of each disc in turn. Each disc is played for 8 seconds. DISC If, during this play, you hear a disc that you want to listen to in SCAN entirely, press the DISC SCAN button once again or press the PLAY button to cancel this function. The unit will enter into the normal play mode. Notes l l During this play, the disc tra
Inhaltszusammenfassung zur Seite Nr. 12
Changing brightness of the display You can change the brightness of the display by pressing the DIMMER button. Normal illumination DIMMER Slightly dim Dim CDC-655 only CDC-655 only When you listen with headphones Adjusting the level of signals output into an amplifier, etc. Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons. You can adjust the level of sound signals output from the LINE * Note that the use of the OUTPUT LEVEL buttons will also OUT t
Inhaltszusammenfassung zur Seite Nr. 13
RANDOM-SEQUENCE PLAY You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any desired disc in the disc tray. CDC-555 CDC-655 OPEN/CLOSE OPEN/CLOSE DIMMER TIME DIMMER TIME 2 2 PROG TAPE REPEAT RANDOM PROG CLEAR REPEAT RANDOM 4 4 12 3 MODE 12 3 MODE 3 3 4 56 +10 4 56 +10 78 9 0 78 9 0 1 3 Select whether to play one disc or all discs in the tray. MODE * If the “1DISC” disc play mode is selected, next select a desired disc by us
Inhaltszusammenfassung zur Seite Nr. 14
PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or more discs in any desired order using programmed play. CDC-555 CDC-655 PROG TAPE REPEAT RANDOM CLEAR REPEAT RANDOM PROG 2 2 12 3 MODE 12 3 MODE 4 56 +10 4 56 +10 4 4 78 9 0 78 9 0 DISC SKIP DISC SKIP DISC DISC SCAN SCAN 3 PAUSE PLAY 3 SKIP PAUSE PLAY SKIP 5 5 SEARCH INDEX STOP SEARCH INDEX STOP 1 1 – OUTPUT LEVEL + SYNCHRO SYNCHRO Stop the unit. Select the desired track. 1 4 STOP STOP 5 2 * Repeat steps 3 – 4 to p
Inhaltszusammenfassung zur Seite Nr. 15
Notes l l You can program as many as 40 tracks at one time. The total time of the programmed tracks will not be l If you choose to perform programming with the DISC 1 tray displayed, if a track number higher than 20 is programmed. l empty, be sure to press a DISC SKIP button before starting If, during programming, the TIME display mode-select button programming. is pressed, the program number display can be changed to l You can program a whole disc by pressing “0”, instead of display the total t
Inhaltszusammenfassung zur Seite Nr. 16
REPEAT PLAY You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. SINGLE REPEAT (REP S) A single track is repeatedly played. * This is also available in the programmed-play mode and the (OFF) random-sequence play mode. (If the repeat play mode is switched off, the programmed-play mode or the random- sequence play mode will be resumed.) REPEAT REP S FULL REPEAT (REP F) In the “1DISC”
Inhaltszusammenfassung zur Seite Nr. 17
CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control tran
Inhaltszusammenfassung zur Seite Nr. 18
TRACK PROGRAMMING FOR RECORDING TO TAPE f for CDC-655 onl or CDC-655 only y This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. OPEN/CLOSE DIMMER TIME 4 6 PROG TAPE REPEAT RANDOM n Automatic tape programming 12 3 MODE This is for re
Inhaltszusammenfassung zur Seite Nr. 19
n Manual tape programming OPEN/CLOSE TIME DIMMER This is for recording desired tracks selected PROG TAPE REPEAT RANDOM from one or more discs in any desired order onto tape. 4, 11 12 3 MODE 4 56 10 + 4, 6 8 78 9 0 DISC SKIP DISC 13 SCAN 2, 5 PAUSE PLAY SKIP SEARCH INDEX STOP 12, 13 – OUTPUT LEVEL + SYNCHRO 1 1 Stop the unit. 9 Follow step 5 and 6. STOP 10 Repeat step 5 and 6 to program more tracks for side B of the tape. You can select the same track again. 2 If you will program tracks from mor
