Inhaltszusammenfassung zur Seite Nr. 1
Professional Dual CD Player
OWNER'S MANUAL
VESTAX CORPORATION
VESTAX America
( )
VESTAX Europe Ltd.
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION 1 FCC 2 IMPORTANT SAFEGUARDS 4 FEATURES 4 CD SECTION 5 MIXER SECTION 9 REAR PANAEL 10 CONNECTION EXAMPLE 10 OPERATION 11 SPECIFICATIONS 12
Inhaltszusammenfassung zur Seite Nr. 3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequeney energy and, If not installed and used in accordance with the lnstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil
Inhaltszusammenfassung zur Seite Nr. 4
READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating 10. Power sources-This product should be operated instructions should be read before the appliance only from the type of power source indicated on is operated. the marking label. If you are not sure of the type of power sup
Inhaltszusammenfassung zur Seite Nr. 5
19. Replacement Parts-When replacement parts are 16. Object and Liquid Entry-Never push objects of required, be sure the service technician has used any kind into this product through openings as replacement parts specified by the manufacturer or they may touch dangerous voltage points or have the same characterristics as the original parts. short-out parts that could result in a fire or Unauthorized substitutions may result in fire, electric shock. Never spill liquid of any kind on electric sho
Inhaltszusammenfassung zur Seite Nr. 6
BEFORE USE Notes on the Compact Disc (CD) The surface which is glossy like a ralnbow is the front side of the CD, and the surface where the label information is printed is the back side. Unlike conventional analog disk turntables, the CD player reads information from the disc by applying laser beam, in place of a stylus, on the front surface. Consequently, the performance of CD discs will not degrade after repeated use like conventional analog disks. Handle the CD disc carefully so as not to d
Inhaltszusammenfassung zur Seite Nr. 7
CUE BUTTON The last pause position is always memorised and can be called up by pressing cue button. This function is useful for instant cueing, the same position can be recalled and played back with a single quick action. Memory of the cue point will be lost or reset when any of the following operations are done. [1] Power is turned off. [2]The CD is paused and played another position. This position will then be memorised as the new cue point. [3]The STOP button is pressed. [4]The CD cover i
Inhaltszusammenfassung zur Seite Nr. 8
STICK CONTROLLER The following three functions can be controlled with STICK CONTROLLER, [1] Pitch bend function The play back speed can be increased or decreased momentary by moving the STICK CONTROLLER up or down. When the stick is set to centre position, the CDX-15 plays back at the pitch set by (4) PITCH ADJUSTMENT FADER. This unique function allows DJs to synchronise the music or adjust the tempo smoothly. stick up The pitch (speed) decreases down to -20% stick down The pitch (speed) increa
Inhaltszusammenfassung zur Seite Nr. 9
DISPLAY BUTTON Pressing this button each time, the display changes the mode to the following figures. [1] Time Indication Mode CD WITH TEXT DATA When the DISPLAY BUTTON is pressed, the display mode changes from Total Remain Time to Track Time, then to Total Remain Time. When the button is pressed one more time from Total Remain Time, the mode is changed back to text Indication Mode. Track Remain Time Track Time Total Remain Time Text Indication Mode CD WITHOUT TEXT DATA When the CD has no t
Inhaltszusammenfassung zur Seite Nr. 10
DISPLAY Indicates motion status, track numbers, times, frames, texts, shock-proof memory status. [1] Indications of motion status Door Open The door of CDX-15 is open TOC Reading TOC data is being read No Disc No CD is placed on the CD tray TOC Error TOC data cannot be read (bad quality CD) Read Error AUDIO data cannot be read (bad quality CD) NO Audio Disk CD has no AUDIO data [2] TRACK NUMBER,TIME,FRAME [4]Indication of shock proof memory status The amount of the data in the shock-proof m
Inhaltszusammenfassung zur Seite Nr. 11
LEVEL VOLUME (PGM A, PGM B) Used to adjust the input level of each program. INPUT LEVEL METER The LED level meters indicate the input signal level of each PGM channel. Please adjust the input level so that 0dB LED lights on peak. CROSSFADER The signal of PGM1 can be monitored when the cross fader is set to the left side. The signal of PGM2 can be monitored when the cross fader is set to the right side . When the cross fader is set in the middle, both programs can be monitored. The cross f
Inhaltszusammenfassung zur Seite Nr. 12
HEADPHONE JACK HEADPHONE LEVEL Adjusts the headphone output level. Connect the headphones to this jack. Headphones with its impedance from 8 ohm to 600 ohm can be used. POWER SWITCH CD OUT JACK Please ensure that the volume level of the power The output jack for the play back signal of each CD. amplifier is at minimum position when the POWER Any of the mixer functions do not effect the signal SWITCH is turned on or off. from this jack. MIX OUT JACK AC CORD Connect
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTION EXAMPLE CHANNEL A CHANNEL B PROTECT B.T.L POWER PEAK PEAK POWER MINI MAX MINI MAX INPUT INPUT ON / OFF
Inhaltszusammenfassung zur Seite Nr. 14
OPERATION (Same for Player A and B) [1] Turn the power on by pressing the POWER switch. [2] Open the CD door and place the disc into the centre shaft until the ball chucking holds the CD with a click. Close the CD door. CD disc starts spinning and the laser pick-up reads the table of contents. Then pauses at the beginning of the first track. [3] Press PLAY/PAUSE button. Starts playback from the first track immediately. Remaining time of the playing track will be shown on the digital display i
Inhaltszusammenfassung zur Seite Nr. 15
SPECIFICATIONS
Inhaltszusammenfassung zur Seite Nr. 16
Vestax Corporation
Inhaltszusammenfassung zur Seite Nr. 17
