Inhaltszusammenfassung zur Seite Nr. 1
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
TASCAM CD-01U/CD-01UPRO
CONTROL I/O Terminals
RS-232C Protocol Specifications
Ver. 1.02
July 2005
TEAC
1 TEAC Corporation
Inhaltszusammenfassung zur Seite Nr. 2
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 1. Overview The CD-01U/CD-01U PRO (here referred to as “controlled device”) functions can be controlled using a serial RS-232C connection from an external device, such as a computer. Such a device is referred to here as the “external controller”. 2. Specifications 2.1. Electrical Specifications Conforms to standard JIS X-5101 (equivalent to former JIS-C-6361 and EIA RS-232C standards) Note that this is not co
Inhaltszusammenfassung zur Seite Nr. 3
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications RXD RXD 2 TXD TXD 3 GND GND 5 CD-01U/CD-01U PRO External controller 3 TEAC Corporation
Inhaltszusammenfassung zur Seite Nr. 4
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 3. Command Format 3.1. Command Format Overview Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 … Byte n LF ID Command Data 1 Data 2 Data 3 Data 4 … CR The codes described here are transmitted in ASCII format (e.g. a command described as “23” is transmitted as ASCII ’2’ followed by ASCII ’3’). Uppercase letters are used for letters ’A’ through ’F’. All commands must be prefixed by a line-feed (LF) char
Inhaltszusammenfassung zur Seite Nr. 5
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 3.3. List of Commands Control/Preset/Sense Command Return Command 88 TIME DATA 0F INFORMATION REQUEST 8F INFORMATION RETURN 10 STOP 12 PLAY 14 READY 15 JOG 16 SHUTTLE 18 EJECT 1A TRACK SKIP 1D CALL 20 AUTO CUE LEVEL PRESET A0 AUTO CUE LEVEL RETURN 23 DIRECT TRACK SEARCH PRESET 25 PITCH CONTROL DATA PRESET A5 PITCH CONTROL DATA RETURN 2C TIME SEARCH PRESET 2E FADE IN/OUT TIME PRESET AE FADE IN/OUT TIME RETURN
Inhaltszusammenfassung zur Seite Nr. 6
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications Version up history Ver. 1.00: Released version. Ver. 1.02: Following commands to be added. PITCH CONTROL DATA PRESET [25] FADE IN/OUT TIME PRESET [2E] EOM TRACK TIME PRESET [32] TIMER RESUME PLAY SELECT [34] FADE IN/OUT SELECT [3E] TIME DATA SEND SELECT [3F] PLAY MODE SENSE [4E] ISRC SENSE [53] CURRENT TRACK TIME SENSE [58] TOTAL TRACK No. / TOTAL TIME SENSE [5D] PITCH CONTROL DATA RETURN [A5] FADE IN/OUT TIME RETUR
Inhaltszusammenfassung zur Seite Nr. 7
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 3.4. Command Sequence The CD-01U/CD-01U PRO does not have the “ACK” command for the each transport control command and data preset command. When a request command is transmitted from external controller to the controlled device, the controlled device sends an appropriate return command. When the mechanism status of the controlled device is changed (i.e. from stop to play), or an error occurs, the controlled device s
Inhaltszusammenfassung zur Seite Nr. 8
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4. Command Detail Commands, data, and machine IDs which are described here are represented in characters (ASCII). A command is a 2-byte character, a Machine ID is a 1-byte character, and each data is a 1-byte character. 4-1. INFORMATION REQUEST Requests the internal software version number of the controlled device. Command 0F Data None Return INFORMATION RETURN [8F] 4-2. STOP Puts the controlled device into STOP mod
Inhaltszusammenfassung zur Seite Nr. 9
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-6. SHUTTLE Performs the search function in SHUTTLE mode. SHUTTLE mode is maintained until the other command such as STOP, PLAY, or READY is received. Command 16 Data 2 bytes Return None Data 1 Data 2 Description Remarks 0 0 Shuttle Forward Searches in shuttle mode in forward direction 0 1 Shuttle Reverse Searches in shuttle mode in backward direction · If the specified data is other than described above, the contr
Inhaltszusammenfassung zur Seite Nr. 10
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-10. AUTO CUE LEVEL PRESET Sets the Auto Cue level of the controlled device. When this command is transmitted with request data ([FF]), the controlled device returns the AUTO CUE LEVEL RETURN command [A0]. The Auto Cue function is turned on and off using the AUTO CUE SELECT command [30]. Command 20 Data 2 bytes Return AUTO CUE LEVEL RETURN [A0] Data 1 Data 2 Description Remarks 0 0 -24dB Sets the Auto Cue detect le
Inhaltszusammenfassung zur Seite Nr. 11
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-12. PITCH CONTROL DATA PRESET Sets the Pitch Control value from –12.5% to +12.5% in 0.1% steps. When this command is transmitted with request data ([FF]), the controlled device returns the PITCH CONTROL DATA RETURN command [A5]. The pitch control function is turned on and off using the PITCH CONTROL SELECT command [35]. Command 25 Data 4 bytes or 2 bytes Return PITCH DATA RETURN [A5] Data 1 Data 2 Data 3 Data 4 De
Inhaltszusammenfassung zur Seite Nr. 12
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-14. FADE IN/OUT TIME PRESET Sets the fade in and out time from 1 to 10 seconds in 1 second steps. When this command is transmitted with request data ([00FF] or [01FF]), the controlled device returns the FADE IN/OUT TIME RETURN command [AE]. The FADE mode is turned on and off using the FADE IN/OUT SELECT command [3E]. Command 2E Data 4 bytes Return FADE IN/OUT TIME RETURN [AE] Data 1 Data 2 Data 3 Data 4 Remarks 0
Inhaltszusammenfassung zur Seite Nr. 13
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-17. TIMER/RESUME PLAY SELECT Turns the Power-on-play mode and Resume Play mode on and off. When this command is transmitted with request data ([FF]), the controlled device sends the RESUME PLAY SELECT RETURN command [B4]. Command 34 Data 2 bytes Return RESUME PLAY SELECT RETURN [B4] Data 1 Data 2 Description Remarks 0 0 Power-on-play OFF / RESUME OFF 0 1 Power-on-play ON / RESUME OFF 0 2 Power-on-play OFF / RESUM
Inhaltszusammenfassung zur Seite Nr. 14
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-20. REPEAT SELECT Sets the Repeat mode. When this command is transmitted with request data [FF], the controlled device returns the REPEAT SELECT RETURN command [B7]. Command 37 Data 2 bytes Return REPEAT SELECT RETURN [B7] Data 1 Data 2 Description Remarks 0 0 Repeat Off Turns the repeat mode off 0 1 Repeat On Turns the repeat mode on F F Repeat mode status request Requests the repeat mode status · If the specifie
Inhaltszusammenfassung zur Seite Nr. 15
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-23. TIME DATA SEND SELECT Sets the Time mode of the time data that is sent out from the controlled device automatically (without any request command). When this command is transmitted with request data [FF], the controlled device returns the TIME DATA SEND SELECT RETURN command [BF]. When specified data includes “Without Frame” information, frame information will not shown on the display of the controlled device.
Inhaltszusammenfassung zur Seite Nr. 16
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-27. ISRC SENSE Requests the output of the ISRC code of the current track (ready mode) or the catalog (stop mode). This data can only be output when a playback-only disc is loaded. Command 53 Data None Return ISRC RETURN [D3] 4-28. TRACK No. SENSE Requests the current track number. Command 55 Data None Return TRACK No. STATUS RETURN [D5] 4-29. DISC STATUS SENSE Requests information on the presence or absence of a d
Inhaltszusammenfassung zur Seite Nr. 17
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 4-34. ERROR SENSE Should be transmitted by the external controller on receipt of an ERROR SENSE REQUEST [F0] from the controlled device, to determine the exact error. The contents of the reply are described in the ERROR SENSE RETURN command. Command 78 Data None Return ERROR SENSE RETURN [F8] 17 TEAC Corporation
Inhaltszusammenfassung zur Seite Nr. 18
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 5. Return Command Detail 5-1. TIME DATA When the Time mode is set to other than “OFF” with TIME DATA SEND SELECT command [3F], controlled device outputs the time data in specified form by TIME DATA SEND SELECT command [3F]. Command 88 Data 8 bytes Description Remarks Data 1 Tens digit of minutes Data 2 Units digit of minutes Data 3 Thousands digit of minutes Data 4 Hundreds digit of minutes Data 5 Tens digit of seco
Inhaltszusammenfassung zur Seite Nr. 19
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 5-4. PITCH CONTROL DATA RETURN Transmitted in response to a PITCH CONTROL DATA PRESET command [25] with the request data ([FF]) to show the currently set Pitch Control value. Command A5 Data 4 bytes Request command PITCH CONTROL DATA PRESET [25] Data 1 Data 2 Data 3 Data 4 Description Remarks 0 Positive (+) value 1 Negative (-) value N2 N3 N1 N1: Tens digit of pitch control value Preset % N2: Units digit of pitch co
Inhaltszusammenfassung zur Seite Nr. 20
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 5-8. TIMER/RESUME PLAY SELECT RETURN Transmitted in response to a TIMER/RESUME PLAY SELECT command [34] with the request data ([FF]) to show the currently set the Power-on-play/Resume function status . Command B4 Data 2 bytes Request command TIMER/RESUME PLAY SELECT [34] Data 1 Data 2 Description Remarks 0 0 Timer Off/Resume Off 0 1 Timer On/Resume Off 0 2 Timer Off/Resume On 0 3 Timer On/Resume On 5-9. PITCH CONTRO
