Bedienungsanleitung Vision Fitness X6700HRT

Inhaltszusammenfassung zur Seite Nr. 1

X6700HRT HARDWARE INCLUDED
COMMERCIAL ELLIPTICAL TRAINERS
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your
ORANGE BAG BLACK BAG
new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
8x16x1T Washer
Be sure to read your Owner’s Guide before using your new

Inhaltszusammenfassung zur Seite Nr. 2

X6700HRT HARDWARE INCLUDED COMMERCIAL ELLIPTICAL TRAINERS To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your ORANGE BAG BLACK BAG new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. 8x16x1T Washer Be sure to read your Owner’s Guide before using your new

Inhaltszusammenfassung zur Seite Nr. 3

STEP STEP 1 ORANGE BAG 4 GREEN BAG Knuckle Bracket • Place a piece of packaging under • Remove protective covers from sleeves the front of the unit to aid in assembly of the pedal arms. of the front foot. IMPORTANT: The washers in the • Secure the front stabilizer tube to the following step must be assembled in STEP base frame plate with four socket 2 the correct order. head bolts (M8x20L) and four arc • Slide one thin metal wave washer washers (8.2x18x1.5T). Tighten with (26x36x0.3T), one flat