Bedienungsanleitung Vinotemp VT-BC-1

Inhaltszusammenfassung zur Seite Nr. 1

A PROUD HERITAGE OF EXPERIENCE & QUALITY

























Beverage Cooler


VT-BC-1




WWW.VINOTEMP.COM

Inhaltszusammenfassung zur Seite Nr. 2

OWNER ’ S MANUAL 2 WWW.VINOTEMP.COM

Inhaltszusammenfassung zur Seite Nr. 3

Your Beverage Cooler This unit can be used for Storage and/or Service. The cooler has a glass door, display panel for branding, and interior light. General Operating Instructions Remove all external and internal packaging from your beverage cooler. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Upon receipt and inspection of unit, the supply cord must be replaced if

Inhaltszusammenfassung zur Seite Nr. 4

TABLE OF CONTENTS TABLE OF CONTENTS......................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS.................................................... 4 PARTS AND IDENTIFICATION.............................................................. 5 ELECTRIC CONNECTION..................................................................... 5 INSTALLATION ................................................................................. 5 START-UP PROCEDURES

Inhaltszusammenfassung zur Seite Nr. 5

PARTS AND IDENTIFICATION A. Cabinet B. Glass Door C. Lock D. Drip Pan E. Compressor F. Adjusting Leg ELECTRIC CONNECTION This unit operate with an 115V~60Hz power supply. Check the electrical outlet for proper voltage. Warning: Do not plug other electrical appliances into cooler outlet. The coolers are supplied with 8ft length electric cord. Do not use extension cords. Provide an outlet just for the cooler. If the cord is damaged replace it and do not try to repair it

Inhaltszusammenfassung zur Seite Nr. 6

START-UP PROCEDURES • Plug the cabinet into the electrical outlet; operate the cooler for at least three hours. This will aid in refrigeration performance. • Do not adjust the temperature control. The temperature control is factory set to provide maximum performance. LIGHT CONTROL • The inside light is controlled by the power. When unit has power, the light will turn on. MAINTENANCE Cleaning • Before cleaning the appliance always remember to unplug it. • Unplug the cooler at

Inhaltszusammenfassung zur Seite Nr. 7

Drip pan • When the compressor stops working, water drops will drain through the outlet in the inner back wall into the drain pan (above the compressor). • If the drain pan needs to be cleaned, pull the drain pan forward gently and reinstall it after cleaning. TROUBLESHOOTING If your cooler does not work properly, please note the following suggestions before you attempt to repair. Cooler does not work: • Check the electrical outlet for power, and that the plug is properly inserte

Inhaltszusammenfassung zur Seite Nr. 8

TERMS OF SALE AND WARRANTY Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect. Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller’s premises, including, but not limited to, late delivery by the moving carrier, or f

Inhaltszusammenfassung zur Seite Nr. 9

SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visi