Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S
MANUAL
ECD-T1550
• PLL Synthesizer Stereo Radio
• Digital Compact Disc Player
• Automatic Memory Storing
• Motorized Hidden Panel
• Preset Equalization
• Auxiliary Input Jack
• Credit Card Remote Control
• Multi-Color LCD
• Plays CD-R/RW discs
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Installation......................................3 Repeating the same track ............11 Take out screw before installation ...3 Playing all tracks in random.........11 DIN Front-Mount (Method A)...........3 Ejecting a disc..............................11 Installing the unit ..........................3 Disc notes........................................11 Removing the unit ........................4 Specification....................................12 DIN Rear-Mount (Method B)..........
Inhaltszusammenfassung zur Seite Nr. 3
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where Before install the unit, please remove the the unit will not interfere with the normal two screws. activity of the driver. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly. Test to see if the system is working properly. • Use only the parts included with the unit to ensure proper installation. The use
Inhaltszusammenfassung zur Seite Nr. 4
INSTALLATION metal strap to a solid metal part of the Sleeve vehicle under the dashboard. This strap L Key also helps ensure proper electrical grounding of the unit. Spring Washer Hex Nut Metal Strap Mounting Bolt R Key Plain Washer Tapping Screw 4. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bend open the app
Inhaltszusammenfassung zur Seite Nr. 5
INSTALLATION DIN REAR-MOUNT (Method B) 3 1 2 4 6 5 Tab 1. Factory-installed radio bracket 2. Car radio mounting bracket 3. Screw 4. After aligning the car radio mounting bracket with the factory-installed radio bracket, tighten the screws (M5x4mm) at 2 places on each side. 5. When fixing factory-installed radio bracket with the screws, use a standard-tipped screwdriver to pry the tabs of the car radio mounting bracket to make them fit into the holes in the factory-installed radio bracket. 6.
Inhaltszusammenfassung zur Seite Nr. 6
USING THE FRONT PANEL 1. When the ignition key is switched to 3. Insert a disc in the disc slot, the “ACC ON”, the panel of the unit will panel will automatically turn up to change from State 1 to State 2 (see State 2. Press (eject) button again, below), the hidden panel will turn up. the panel will turn down to eject the disc. If you don’t insert a disc in again, the panel will automatically turn up after 10 seconds. If you don’t want to wait, press (eject) button, the panel will
Inhaltszusammenfassung zur Seite Nr. 7
WIRING CONNECTION 4 x 50W System MAIN UNIT ANTENNA SOCKET IGNITION RED SWITCH (ACC+) YELLOW MEMORY BACK-UP (B+) (GREY) BLACK GROUND (B–) Rch RED RCA CABLE Lch WHITE BLUE POWER ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 7
Inhaltszusammenfassung zur Seite Nr. 8
OPERATION 27 10 23 24 8 12 4 13 11 14 9 3 2 1 18 19 20 21 22 6 16 17 7 15 5 8
Inhaltszusammenfassung zur Seite Nr. 9
OPERATION SWITCHING ON/OFF THE UNIT SET THE CLOCK When the hidden panel turns up (in State Press the DSP button (15), the clock is 2), switch the unit on by pressing any shown on the LCD display. Then hold down button (except button (4)). When system the button until the clock flashes. Then is on, press (9) to turn the unit off. press the MANU/SKIP button (17) to change hours or MANU/SKIP button (16) SOUND ADJUSTMENT to change minutes. Press SEL button (10) to select the desired adjus
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION • AUTOMATIC MEMORY RADIO OPERATION STORING & PROGRAM SCANNING • SWITCHING TO RADIO MODE - Automatic Memory Storing Press MOD button (6) shortly to select Press AMS button (18) for several radio mode, the radio mode appears seconds, the radio searches from in the display together with the memory the current frequency and checks band and frequency. the signal strength until one cycle search is finished. The six • SELECTING THE FREQUENCY strongest stations will be stored into BAND
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION If a CD is already inserted in the player: DISC NOTES Keep pressing MOD button (6) shortly until the CD mode display appears. A. Notes on discs: • Attempting to use non-standard • SELECTING TRACKS shape discs (e.g. square, start, heart) Press MANU/SKIP -button (16) or may damage the unit. Be sure to use MANU/SKIP+ button(17) to move round shape CD discs only for this to the previous track or the following unit. track. Track number shows on display. • Do not stick paper or tap
Inhaltszusammenfassung zur Seite Nr. 12
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 50 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 45 dB Frequency Response : 40 Hz - 18 KHz RADIO : FM Frequency Coverage : 87.5 to 107.9 IF : 10.7 MHz Sensitivity (S/N=30dB) : 4µ V Stereo Separation
Inhaltszusammenfassung zur Seite Nr. 13
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be Presence of CD disc inside Remove the disc in the player, load
Inhaltszusammenfassung zur Seite Nr. 14
SANYO MOBILE AUDIO MODEL ECD-T1550 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. For product operation, authorized service center referral, service assistance or problem resolution, ca
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
21605 Plummer Street Chatsworth, CA91311 ECD-T1443. Issue Number 1. 88-C1732-01 Printed in Hong Kong
