Inhaltszusammenfassung zur Seite Nr. 1
COMPACT DISC PLAYER
WITH AM/FM RADIO
MODEL CD-1095
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS
•
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY
•
RECEIVES AM/FM BROADCASTS
•
POWER LED INDICATOR
•
2 WAY POWER - AC/DC
•
REQUIRES 6 SIZE “C” BATTERIES (not included)
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD1095(SY)-WM-E-031604
IB-CD1095(sy)-WM-E-031604.p65 1 3/18/2004, 2:11 PM
Inhaltszusammenfassung zur Seite Nr. 2
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with The exclamation point within WARNING: TO REDUCE THE arrowhead symbol, within an an equilateral triangle is RISK OF ELECTRIC SHOCK, equilateral triangle, is intended to
Inhaltszusammenfassung zur Seite Nr. 3
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance bey
Inhaltszusammenfassung zur Seite Nr. 4
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Released elec
Inhaltszusammenfassung zur Seite Nr. 5
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet NOTE: One blade of the plug and outlet is wider. AC SOCKET Replace the batteries • 1. Connecting the AC power when the POWER lamp dims or when the player cord stops operating. Replace Insert one end of the supplied AC power cord into all the batteries with new the socket located at the rear of the player, and the ones. Before you replace other end to the wall outlet. the batteries, be sure to ta
Inhaltszusammenfassung zur Seite Nr. 6
PLAYING A CD OPEN THE CD DOOR BY LIFTING HERE FUNCTION SWITCH (at the left side of the set) PLAY/PAUSE Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch FUNCTION RADIO OFF CD 1 (at the left side of the set) to CD position, the POWER lamp will turn on and the display will show 2 dashes “--” flashing, POWER lamp then “ ”. Lift the right corner of the CD 2 DOOR to open it and place a CD in the CD compartment. The label side of the CD should face upw
Inhaltszusammenfassung zur Seite Nr. 7
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME OPEN THE CD DOOR CONTROL BY LIFTING HERE PHONES JACK FUNCTION SWITCH (at the left side of the set) STOP BACKWARD PLAY/PAUSE FORWARD TIP When CD play is To paused, the PLAY/ Press or Adjust PAUSE lamp will Adjust the volume VOLUME control flash and no music Stop playback STOP will play. PLAY/PAUSE To resume play, The PLAY/PAUSE lamp will press the PLAY/ Pause playback flash during pause. Press PAUSE button again to resume play after again, the P
Inhaltszusammenfassung zur Seite Nr. 8
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play modes (see page 8). PLAY/PAUSE FUNCTION SWITCH (at the left side of the set) REPEAT BUTTON PROGRAM BUTTON BACKWARD FORWARD 1. Slide the FUNCTION switch (at the left side of the set) to the CD position. 2. Select the track by pressing SKIP/SEARCH BACKWARD or FORWARD , and then press .. 3. Press the CD REPEAT button. To repeat Press Display shows REPEAT Press the REPE
Inhaltszusammenfassung zur Seite Nr. 9
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 20 tracks in the order you want them to be played. PROGRAM BUTTON PROGRAM LAMP 1. Slide the FUNCTION switch to CD position. REPEAT Make sure the CD is stopped. PROGRAM 2. Press the PROG. button. The letters PLAY/ PAUSE “ ” and the PROGRAM lamp will flash in the display. 3. Press or to select the tracks you want to REPEAT program in the order you want. The selected PROGRAM number will be steadily on and th
Inhaltszusammenfassung zur Seite Nr. 10
LISTENING TO THE RADIO FUNCTION SWITCH TUNING CONTROL (at the left side of the set) BAND SWITCH Connect the supplied AC power cord or batteries (see page 4). FUNCTION RADIO OFF CD Slide the FUNCTION switch (at the 1 left side of the set) to RADIO position, the POWER lamp will turn on. BAND AM FM Slide the BAND switch (at the right 2 side of the set) to the proper band position (AM or FM) that you want. Tune into the station you prefer 3 using the TUNING control. Adjust for the cleare
Inhaltszusammenfassung zur Seite Nr. 11
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL FUNCTION SWITCH (at the left side of the set) TIP To Slide or Adjust Next time you want to • listen to the radio, just Adjust the volume VOLUME control slide the FUNCTION switch to RADIO Slide the FUNCTION switch position. The player Turn off the Radio (at the left side of the set) automatically starts to OFF position playing the previously tuned station. To improve broadcast reception Change position of the antenna for FM. Move the set
Inhaltszusammenfassung zur Seite Nr. 12
PRECAUTIONS On Safety On Power Sources As the laser beam used in the CD For battery operation, use 6 size “C” • • player section may be harmful to the batteries. We recommend alkaline eyes, do not attempt to disassemble batteries for longer life. the cabinet. Refer servicing to When the batteries will not be used • qualified personnel only. for a few weeks or more, remove them to avoid damage that can be caused Should any solid object or liquid fall • by battery leakage or corrosion. into the pl
Inhaltszusammenfassung zur Seite Nr. 13
PRECAUTIONS (continued) MAINTENANCE Notes on CDs Cleaning the Lens Before playing, clean the CD with a If the lens becomes dirty, it may • cleaning cloth. Wipe the CD from the cause a skipping of sound during CD center out. operation. Clean with a commercially available lens cleaner and blower. Do not use solvents such as benzine, • thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct • sunlight or heat sources such as hot air ducts
Inhaltszusammenfassung zur Seite Nr. 14
TROUBLE SHOOTING Problem Remedy Connect the AC power cord to a wall • outlet securely. The power is not on. Make sure the batteries are inserted • correctly and they are fresh. Make sure the FUNCTION switch is at • the right position as you want. There is no sound. Adjust the volume. • Unplug the headphones when listening • through speakers. “ ” appears in the display Insert the CD with the label side up. • even when a CD is in place. Make sure that the CD compartment is • closed. Place the CD w
Inhaltszusammenfassung zur Seite Nr. 15
SPECIFICATION General Description AC 120V, 60Hz, 14Watts Power source: DC 9V (6 size “C” batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 ” 8 ohm Output power: 1.5W/channel Dimensions: Width: 12” Depth: 10” Height: 6” Weight: 3.3LBs (without batteries) CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens Frequency response: 50Hz - 15kHz +1/-2dB NOTE: This CD player will
Inhaltszusammenfassung zur Seite Nr. 16
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial
