Inhaltszusammenfassung zur Seite Nr. 1
S75340KG98
User manual Fridge-Freezer
Inhaltszusammenfassung zur Seite Nr. 2
2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Safety information 2 Helpful hints and tips
Inhaltszusammenfassung zur Seite Nr. 3
Safety information 3 appliance are thoroughly familiar with its operation and safety features. Save these in- structions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. Children and vulnerable people safety • This appli
Inhaltszusammenfassung zur Seite Nr. 4
4 Safety information • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel. 1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and
Inhaltszusammenfassung zur Seite Nr. 5
Control panel 5 • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacking this leads to overheat- ing. To achieve sufficient ventilation follow the instructions re
Inhaltszusammenfassung zur Seite Nr. 6
6 Control panel 8 Freezer compartment indicator 9 FROSTMATIC indicator 10 FROSTMATIC button 11 Freezer temperature regulator, + button 12 Freezer temperature indicator 13 Freezer temperature regulator, - button 14 Alarm reset button 15 Alarm indicator Switching on 1. Insert the plug into the mains socket. 2. Set ON/OFF switch to ON. 3. The alarm indicator light flashes since the temperature is reached. The acoustic alarm sounds. 4. Press the alarm reset button to reset the alarm. Switching off T
Inhaltszusammenfassung zur Seite Nr. 7
Control panel 7 responding compartment. The temperature indicator will change from flashing to con- tinuous illumination. For a correct storage of the food the following temperatures should be set: • +5 °C in the fridge • -18 °C in the freezer. When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the storage temperature within the fridge is reached quickly you can store food immediately after switching on. COOLMATIC function
Inhaltszusammenfassung zur Seite Nr. 8
8 First use High temperature alarm In the event of an abnormal temperature rise inside the freezer (e.g. power cut) alarm indicator light will start to flash and a buzzer will sound. Push the alarm reset button to stop the buzzer sound, while the alarm indicator light will continue to flash. The buzzer will stop automatically when the temperature has returned to normal while the alarm indicator light will continue to flash. Press the alarm reset button. The alarm indicator light goes out and at
Inhaltszusammenfassung zur Seite Nr. 9
Daily use 9 Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. Bottle rack Place the bottles (with the opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles. This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this re- sult, pull the shelf up so it can rotate upwards and be placed on the next higher level. V
Inhaltszusammenfassung zur Seite Nr. 10
10 Daily use Positioning the door shelves To permit storage of food packages of vari- ous sizes, the door shelves can be placed at different heights. To make these adjustments proceed as fol- lows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. Removal of freezing baskets from the freezer 2 1 2 1 The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull th
Inhaltszusammenfassung zur Seite Nr. 11
Helpful hints and tips 11 Helpful hints and tips Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous physical phenomenon. This is correct. Hints
Inhaltszusammenfassung zur Seite Nr. 12
12 Care and cleaning • do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fatty ones; salt reduces the storage life of food; • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time. Hints for st
Inhaltszusammenfassung zur Seite Nr. 13
What to do if… 13 Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water over- flowing an
Inhaltszusammenfassung zur Seite Nr. 14
14 What to do if… Problem Possible cause Solution The door has been opened too Do not keep the door open longer frequently. than necessary. The product temperature is too Let the product temperature de- high. crease to room temperature be- fore storage. The room temperature is too Decrease the room temperature. high. The FROSTMATIC function is Refer to "FROSTMATIC function". switched on. The COOLMATIC function is Refer to "COOLMATIC function". switched on. Water flows on the rear During the
Inhaltszusammenfassung zur Seite Nr. 15
Technical data 15 Problem Possible cause Solution The appliance has no power. Connect a different electrical ap- There is no voltage in the mains pliance to the mains socket. Con- socket. tact a qualified electrician. The lamp is in stand-by. Close and open the door. The lamp does not work. The lamp is defective. Refer to "Replacing the lamp". As much as the advice does not lead to result, call the nearest brand-mark service. Replacing the lamp CAUTION! Disconnect the plug from the mains socke
Inhaltszusammenfassung zur Seite Nr. 16
16 Installation Installation WARNING! Read the "Safety Information" carefully for your safety and correct operation of the ap- pliance before installing the appliance. Positioning Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location The appliance should be installed well away from source
Inhaltszusammenfassung zur Seite Nr. 17
Installation 17 1 2 3 5 4 The wires in the mains lead are coloured in accordance with the following code: 1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wir
Inhaltszusammenfassung zur Seite Nr. 18
18 Installation Rear spacers In the bag with the documentation, there are two spacers which must be fitted as shown in the figure. 2 Slacken the screws and insert the spacer under the screw head, then tighten again the screws. 1 3 Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front. Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves during A transpo
Inhaltszusammenfassung zur Seite Nr. 19
Installation 19 To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. 1. Open the doors. Unscrew the middle hinge (m2). Remove the plastic spacer m1 m2 (m1). 2. Remove the spacer (m6) and move to the other side of the hinge pivot (m5). 3. Remove the doors. 4. Remove the left-hand cover pin of the m6 m5 middle hinge (m3,m4) and move to the other side. 5. Fit the pin of the middle hing
Inhaltszusammenfassung zur Seite Nr. 20
20 Installation 8. Reverse the door locking elements (d2,d3), move to the other side of the other door and fix by screwing in the screw (d4). 9. Re-insert the stoppers (d5,d6) on the d2 other side of the doors. 10. Re-insert the lower door on the lower d4 hinge pivot (b2). d3 d6 11. Insert the middle hinge (m2) into the left drill of the lower door. d5 12. Unscrew the upper hinge pivot (t1) and place it on the opposite side. 13. Fit the upper door on the upper door pivot. 14. Re-insert the upper
