Bedienungsanleitung Amana DB10

Inhaltszusammenfassung zur Seite Nr. 1

®
DB10
Bottom Freezer
Refrigerator
Trim Kit
Installation
Instructions
Keep these instructions for future
reference. If the refrigerator changes
ownership, be sure this manual accom-
panies refrigerator.

Inhaltszusammenfassung zur Seite Nr. 2

Contents Decorator Panel Dimensions Introduction ................................................................ 2 Listed below are required height x width dimensions for Parts list.................................................................... 2 decorator panels. Panels are not supplied with this kit and Decorator Panel Dimensions ...................................... 2 can be purchased locally. Procedure .................................................................. 3 • If panels ar

Inhaltszusammenfassung zur Seite Nr. 3

Procedure 13. Install freezer door by positioning door on bottom Caution hinge pin. To avoid property damage, protect soft vinyl or 14. Install center hinge pin and door closure. other flooring with cardboard, rugs, or other 15. Install freezer door decorator panel by sliding panel in protective material. from handle side of freezer door. 16. Align handle side freezer door trim. After verifying 1. Remove screw caps on refrigerator and freezer placement, peel off paper backing and press trim in h

Inhaltszusammenfassung zur Seite Nr. 4

23. Align handle side door trim. After verifying placement, peel off paper backing and press trim in place. Handle side trim will have 4 holes for screws to mount the handle, and cupped on both ends. Refrigerator door Top trim Handle Side trim 29. Open door 180° then close door to confirm panel and trim fit properly. 30. Replace handles by positioning handles on door. Insert and tighten screws with a Phillips screwdriver. 31. Replace screw caps on refrigerator and freezer handles by snapping on