Inhaltszusammenfassung zur Seite Nr. 1
CD-RECEIVER
KDC-PS9060R
INSTRUCTION MANUAL
KDC-8060R
KDC-7060R
COMPACT
DIGITAL AUDIO
©B64-1181-00 (EW)
Inhaltszusammenfassung zur Seite Nr. 2
Contents Before use Playing Other Disc mode ............................................................21 Safety precautions ........................................................................3 Fast Forwarding and Reversing Disc Play...................................21 Handling Compact discs................................................................5 Track Search................................................................................21 Disc Search ............................
Inhaltszusammenfassung zur Seite Nr. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. For users To prevent injury and/or fire, take the To prevent damage to the machine, who want to use older changers with the following precautions: take the following precautions: unit, follow the directions below according to • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative the type of changer you own: locked in place.
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions Cleaning the Unit Cleaning the CD Slot NOTE If the front panel gets dirty, turn off the As dust can accumulate in the CD slot, clean • If you experience problems during power and wipe the panel with a dry silicon it occasionally. Your CDs can get scratched if installation, consult your Kenwood dealer. cloth or soft cloth. you put them in a dusty CD slot. • If the unit fails to operate properly, press the 2CAUTION RESET button. When the faceplate is not visible, press “the tou
Inhaltszusammenfassung zur Seite Nr. 5
Handling Compact discs slot, such as stabilisers, protective sheets, or Playing a CD that is dirty, scratched Cleaning CDs CD cleaning discs, since they can cause the or warped can cause the sound to If a CD has become dirty, wipe it off gently unit to malfunction. using a commercially available cleaning cloth skip and the unit to operate or a soft cotton cloth, starting from the incorrectly, resulting in worsened centre of the disc and moving outward. Do Removing the CD sound quality. Take the
Inhaltszusammenfassung zur Seite Nr. 6
Buttons and Display Basic operations Tuner features d u 4 4 FM SRC DISP SRC FM 40W 4 x TUNER 40W 4 x TUNER TI DISP/ TI DISP/ VOL TEXT NAME. S VOL TEXT NAME. S ADJ ADJ EJECT PTY CLOSE EJECT PTY CLOSE PWR OFF PWR OFF DAB DAB SCAN RDM REP D.SCN M.RDM MENU SCAN RDM REP D.SCN M.RDM MENU LOUD LOUD DISC DISC AUD AUD ATT/LOUD MENU AM ¢
#1~6 MENU AM ¢
for KDC-8060R/7060R for KDC-8060R/7060R AUTO indicator Band display Frequency VOLUME 10 FM1 92.1 ATT indicator Preset station number ST indicator
Inhaltszusammenfassung zur Seite Nr. 7
RDS features Disc control features 38/ TI/ DISP/ 4 4 38 PTY VOL ADJ DISP /EJECT NAME.S SRC FM 40W x 4 TUNER 40W x 4 TUNER TI DISP/ TI DISP/ VOL TEXT NAME. S VOL TEXT NAME. S ADJ ADJ EJECT PTY CLOSE EJECT PTY CLOSE PWR OFF PWR OFF DAB DAB SCAN RDM REP D.SCN M.RDM MENU SCAN RDM REP D.SCN M.RDM MENU LOUD LOUD DISC DISC AUD AUD #1~6 MENU AM ¢ RDM D.SCN MENU AM/ ¢ FM/ SCAN REP M.RDM DISC– DISC+ for KDC-8060R/7060R for KDC-8060R/7060R Track time/ REG indicator Direct inputted track number/ TA indica
Inhaltszusammenfassung zur Seite Nr. 8
Buttons and Display Other features Steering remote control Optional for the KDC-7060R 4 DISP FM SRC ¢ 40W x 4 TUNER TI DISP/ VOL TEXT NAME. S ADJ u FM/DISC + EJECT PTY CLOSE PWR OFF DAB UP LOUD CLK/ANA SCAN RDM REP D.SCN M.RDM MENU DISC AUD NF 5 ¢ FM/DISC+ VOLUME ATT SRC ° ATT SRC DWN CLK/ANA #1~4 AUD/MENU AM/ ¢ 4 AM/DISC– NF for KDC-8060R/7060R d AM/DISC – 4 Clock display AUDIO CONTROL indicator Remote control Optional FM1 1235 TUNER #0~9 A~Z CD Graphic display ABC DEF £ indicator TUNER 1
Inhaltszusammenfassung zur Seite Nr. 9
Basic operations (See page 6) • During the forced closing of the unit (i.e., having the unit left Stealth Retraction Mechanism closed whilst ignition is turned on), the faceplate will not open You can help prevent theft of the unit by reversing the no matter how often the ignition is turned on or off, unless “the faceplate so that the control panel cannot be seen, hiding the touch-sensitive spot” at the rear of the faceplate is pressed in unit, and shutting off the audio. order to open it. You
Inhaltszusammenfassung zur Seite Nr. 10
Basic operations (See page 6) Attenuator Switching Modes Switching Modes: This function allows you to turn down the volume quickly. Each time you press the SRC button, the mode switches as Turning Attenuator On/Off: follows: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. Tuner mode When the attenuator is off, the volume returns to the original level. CD mode NOTE Disc control mode Turning down the volume all the way turns off the at
Inhaltszusammenfassung zur Seite Nr. 11
Varieties of settings for 2 Selecting function to set Function Press the ¢ button to search through the functions until you each function (display) see the one you want to adjust in the display. Press the 4 button to search through the functions Switching Clock Display CLOCK ON CLOCK OFF backward. ›fl Example: If you want to switch the tuning mode from AUTO1 Time Adjustment (Manual) CLOCK ADJST (Time to manual, first search through the functions until adj
Inhaltszusammenfassung zur Seite Nr. 12
Tuner features (See page 6) K2I ( Kenwood Intelligent Twin IF) Tuning When the frequency of another station is too close to that of 1 Press the SRC button repeatedly until the tuner mode is the station currently being listened to, interfering with proper obtained. "TUNER" is displayed only when the tuner mode is reception, this function automatically narrows the range of selected. received frequencies to prevent such interference. 2 Press either the FM or AM button to select the band. Each time
Inhaltszusammenfassung zur Seite Nr. 13
Function of the KDC-8060R/7060R Local Seek Function Switching Display for Tuner (non-RDS station) With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Switching the Display: Each time you press the DISP button, the display switches Turning Local Seek Function On/Off: between the frequency and clock. 1 Hold down the MENU button for one second or more. NOTE "MENU" is displayed and the menu mode is turned on. • When the switching clock display (P.3
Inhaltszusammenfassung zur Seite Nr. 14
Tuner features (See page 6) Function of remote control with number/letter entry buttons Auto Memory Entry (See page 8) You can automatically store all the receivable frequencies in Direct Access Tuning the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful When you already know the frequency of the station that you when you are travelling and do not know what stations are want to listen to, you can enter it directly for q
Inhaltszusammenfassung zur Seite Nr. 15
RDS features (See page 7) Function of remote control with DNPP button (See page 8) RDS (Radio Data System) Preset station seek with Programme service name RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as You can search for the preset station with Programme Service network information being transmitted from radio stations. name. When listening to an RDS station (ie, a station with RDS 1 capability), the programme service name of
Inhaltszusammenfassung zur Seite Nr. 16
RDS features (See page 7) AF (Alternative Frequency) Function Restricting RDS Region (Region Restrict Function) When poor reception is experienced, automatically switch to You can choose whether or not to restrict the RDS channels, another frequency broadcasting the same programme in the received with the AF function for a particular network, to a same RDS network with better reception. specific region. When the Region Restrict Function is on, the The ªindicator lights up when the AF function is
Inhaltszusammenfassung zur Seite Nr. 17
If you are listening to a tape or disc when a traffic bulletin 2 Press the ¢ button repeatedly until the Auto TP Seek begins, they will automatically be turned off. When the function appears in the display. bulletin ends or poor reception is experienced, the tape or disc Press the 4 button to search in the other direction. will begin playing again. The function setting is indicated by "ATPS ON" or "ATPS OFF" NOTE in the display, indicating that the function is on or off, respectively. Pressing
Inhaltszusammenfassung zur Seite Nr. 18
RDS features (See page 7) News Bulletin Function 4 Press the MENU button to end the menu mode. with PTY News Timeout Setting NOTE You can arrange to have news bulletins interrupt your current • This function is only available if the desired station sends PTY- listening source, including other radio stations. When the code for news bulletin or belongs to EON-Network sending News Bulletin function is on, the PTY News Timeout setting PTY-code for news bulletin. allows you to set the interval durin
Inhaltszusammenfassung zur Seite Nr. 19
18.Children's programmes 19.Social Affairs Programme Type Display 20.Religion 21.Phone 22.Travel 23.Leisure Programme KDC-PS9060R KDC-8060R/7060R 24.Jazz Music 25.Country Music 26.National Music type number 27.Oldies Music 28.Folk Music 29.Documentary 1 News NEWS Music Speech 2 Current Affairs AFFAIRS (Speech.....1~9,16~23, 29, Music.....10~15, 24~28) 3 Information INFO • You can select the type of programme directly by pressing a 4 Sport SPORT preset button. The buttons are factory-set to the
Inhaltszusammenfassung zur Seite Nr. 20
Disc control features (See page 7) When a unit equipped with an O-N switch is to be connected, Playing CDs please also see the instruction manual of this unit. Playing CDs: Set the O-N switch to "N". "N"-operation will be set. Press the Á(EJECT) button to slide open the faceplate, When a unit that is not equipped with an O-N switch, or the showing the CD (insertion) slot. Holding the CD with the changer switching unit "KCA-S200" is connected, "O"- labeled side facing up, insert it in the slot.
