Inhaltszusammenfassung zur Seite Nr. 1
ATT
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX8R
KS-FX8R
KS-FX8R
40Wx4
MO
DISP
RND
5
RDS
SSM
°
TP
RPT
PTY
DOLBY B NR DAB
7 8 9 10 11 12
TAPE
SCM CD-CH FM/AM
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.
Pour l’installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................................................... 3 BASIC OPERATIONS ....................................................4 RADIO BASIC OPERATIONS .........................................5 Listening to the radio ...........................................
Inhaltszusammenfassung zur Seite Nr. 3
OTHER MAIN FUNCTIONS .........................................25 Setting the clock ............................................................................ 25 Changing the general settings (PSM) ......................................... 26 Basic Procedure ........................................................................ 26 Canceling Advanced SCM .........................................................28 Selecting the clock display .....................................................
Inhaltszusammenfassung zur Seite Nr. 4
ATT BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly. (See page 25.) 3 2 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. TAPE FM/AM CD-CH ª £ To operate the tuner, see pages 5 – 16. To operate the cassette deck, see pages 17 – 20. To operate the CD changer, see pages 32 – 34. To operate th
Inhaltszusammenfassung zur Seite Nr. 5
RADIO BASIC OPERATIONS Listening to the radio 2 1 1 FM/AM Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station. F1 F2 F3 AM (FM1) (FM2) (FM3) Audio (see page 28) or Selected band (or clock volume level indicator time: see page 28) appears. To search stations 2 of higher Start searching a station. frequencies. When a station is received, searching stops. To search stations of lower frequencies. To stop searching before a station is received
Inhaltszusammenfassung zur Seite Nr. 6
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 2 1 1 FM/AM Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. F1 F2 F3 AM (FM1) (FM2) (FM3) 2 Press and hold both buttons for more than
Inhaltszusammenfassung zur Seite Nr. 7
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 1 Select the FM1 band. FM/AM 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Band/preset number and “MEMO” flash alternately for a while. 4 Repeat the above procedure to store other stations into other preset number
Inhaltszusammenfassung zur Seite Nr. 8
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. MO RND 2 1 1 Select the band (FM1, FM2, FM3 or AM) FM/AM you want. F1 F2 F3 AM (FM1) (FM2) (FM3) 2 Select the number (1 – 6) for the preset station you want. When an FM stereo broadcast is hard to receive: Press MO RND (Monaural/Random/Dolby) while listening to an FM stereo broadcast. The MONO (Monaural) indicator lights up on
Inhaltszusammenfassung zur Seite Nr. 9
RDS OPERATIONS What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a st
Inhaltszusammenfassung zur Seite Nr. 10
Mode 1 The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to “off.” Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to “on.” Switches to another station, within the same netw
Inhaltszusammenfassung zur Seite Nr. 11
Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, tape, CD and other connected components). Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception • When you press TP RDS while listening to an FM station, the TP indicator RDS TP is lit during reception of a TP (Traffic Programme) station and the TA sta
Inhaltszusammenfassung zur Seite Nr. 12
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 2 3 CD-CH FM/AM CD 1,4 1 Press and hold SEL (select) for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 26). 2 Select “PTY STBY (standby)” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 15.) Selected c
Inhaltszusammenfassung zur Seite Nr. 13
To store your favorite programme types 2 3 CD-CH FM/AM CD 1,5 4 1 Press and hold SEL (select) for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 26). 2 Select “PTY SRCH (search)” if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 15.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. 4 Press and hold the number button for more than 2 seconds to store the PTY code select
Inhaltszusammenfassung zur Seite Nr. 14
To search your favorite programme type 1 CD-CH FM/AM CD 2 1 Press and hold PTY (programme type) for PTY more than 1 second while listening to an FM station. The last selected PTY code and preset number appear. 2 Select one of PTY codes stored in preset number buttons (1 to 6). Ex. When “ROCK M” is stored in preset number button 2. PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code you selected, that station is tune
Inhaltszusammenfassung zur Seite Nr. 15
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in another frequency broadcasting the same programme as the original preset station is broadcasting. In case no ot
Inhaltszusammenfassung zur Seite Nr. 16
Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQ), while listening to an FM RDS station. • See also “Changing the general settings (PSM)” on page 26. 1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2. Select “TU DISP (tuner display)” with ¢ or 4. 3. Set to the desired indication (“PS NAME” or “FREQ”) with the con
Inhaltszusammenfassung zur Seite Nr. 17
TAPE OPERATIONS Listening to a tape 1 MO RND 3 1 Open the control panel. 2 1. Insert a cassette into the cassette compartment. The unit turns on and tape play starts automatically. 2. Close the control panel by hand. • When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) Note on One-Touch Operation: When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the unit and starts tape play automaticall
Inhaltszusammenfassung zur Seite Nr. 18
To stop play and eject the cassette Press 0. Tape play stops, the control panel opens, then the cassette automatically ejects from the cassette compartment. If you change the source to FM, AM, CD changer or other connected component, the tape play also stops (without ejecting the cassette this time). • You can also eject the cassette with the unit turned off. To fast-forward and rewind a tape • Press ¢ for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is re
Inhaltszusammenfassung zur Seite Nr. 19
Finding the beginning of a tune Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune. ¢ 4 FM/AM CD CD-CH During playback To locate a tune ahead of the current Specify how many tunes ahead of or tune on the tape before the current tune the tune you want is located. To locate a tune before the current tune on the tape Each time you set the tune, the number changes up to ±9. When the beg
Inhaltszusammenfassung zur Seite Nr. 20
Other convenient tape functions Skipping the blank portions on the tape You can skip blank portions between the tunes. (Blank Skip) When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it. • See also “Changing the general settings (PSM)” on page 26. 1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2. Select “B. SKIP (blank skip)” with ¢ or 4. 3. Select the desi
