Inhaltszusammenfassung zur Seite Nr. 1
MCD5060
MARINE CD PLAYER / RECEIVER
Installation and Operation Manual
MCD5060
Inhaltszusammenfassung zur Seite Nr. 2
MCD5060 SAFETY INFORMATION DISC NOTES When Driving Compatible Disc Types Keep the volume level Iow enough to be aware of the road and traffic conditions. Table 1: General Disc Information Protect from Water Do not expose the product directly to water, as this can cause electrical shorts, fire or other Diameter/ damage. Disc Type Logo Playback Time Playable Sides Protect from High Temperatures Audio CD 12 cm single side 74 minutes Exposure to direct sunlight for an extended period of time can pr
Inhaltszusammenfassung zur Seite Nr. 3
MCD5060 6. Follow the wiring diagram carefully and make certain all connections are secure and INSTALLATION insulated with crimp connectors or electrical tape to ensure proper operation. Before You Begin 7. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (vehicle ignition switch must be on). If the unit does not operate, 1. Disconnect Battery recheck all wiring until the problem is corrected. Once proper operation is achieved, turn B
Inhaltszusammenfassung zur Seite Nr. 4
MCD5060 • The DCP can easily be damaged if dropped or subjected to a strong shock. When the DIN Rear Mount (Method B) release button is pressed and the DCP is unlocked, the vehicle's vibrations may cause it This unit has threaded holes in the chassis side panels which may be used with the original to fall. To prevent damage to the DCP, always store it in a protective case after detaching factory mounting brackets of some vehicles to mount the radio to the dashboard. Please it. consult with
Inhaltszusammenfassung zur Seite Nr. 5
MCD5060 WIRING 688A ANTENNA JACK FUSE ANTENNA SOCKET 20-PIN AUDIO/POWER HARNESS (See Figure 1) RCA-TO-RCA CABLE (not supplied) WHITE REAR LINE OUT GREY RED AMP Figure 1: 20 PIN HARNESS PIN CHART 12 3 4 5 6 7 8 9 10 BLUE Power Antenna Connect to power antenna or amplifier, 11 12 13 14 15 16 17 18 19 20 If not used, tape bare end of wire. BLACK Ground PIN WIRE COLOR FUNCTION / LABEL Connect to ground terminal or clean 1 GREY / BLACK RIGHT FRONT SPEAKER ( ) unpainted metal part of chassis. 2 GREY R
Inhaltszusammenfassung zur Seite Nr. 6
RESET MCD5060 Clock Adjustment BASIC OPERATION With the clock displayed, press the D button (18) until the LCD flashes. Press the up >>| (21) button to adjust the hours or the down |<< button (20) to adjust the minutes. 3 7 4 19 22 2 Reset After releasing the control panel, use a pencil or any non-metallic object to press and hold the RESET button for five seconds to reset the main unit. The unit will return to the factory default settings. The MCD5060 reset button should be activated for th
Inhaltszusammenfassung zur Seite Nr. 7
MCD5060 Store a Station TUNER OPERATION Select a band (if needed), then select a station. Hold a preset button (12-17) for three seconds. The preset number will appear in the display. 3 7 4 19 22 2 Recall a Station Select a band (if needed). Press a preset button (12-17) to select the corresponding stored station. Automatically Store / Preset Scan (AS/PS) MCD5060 Automatically Store Select a band (if needed). Press AS/PS (11) on the control panel for more than three seconds to automatically s
Inhaltszusammenfassung zur Seite Nr. 8
MCD5060 CD OPERATION 3 7 4 19 22 2 MCD5060 1 6 5 20 21 12 13 14 15 16 17 10 9 8 11 18 Insert and Eject Disc Insert a disc, label-side up, with the unit turned on. “S-CDP” will display on the LCD for about 2 seconds and the unit will play the first track on the disc. Press the eject button (2) to stop disc play and eject the disc. The unit does not have to be turned on to eject the disc. Controlling Disc Playback Track Select Press the up >>| (21) or down |<< button (20) on the control panel fo
Inhaltszusammenfassung zur Seite Nr. 9
MCD5060 SPECIFICATIONS TROUBLESHOOTING CD Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 70dB Symptom Cause Solution Sampling Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.1Khz No power The vehicle’s ignition is not If the power supply is properly Quantization Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 10
MCD5060 ASA Electronics Corporation www.asaelectronics.com © 2006 ASA Electronics Corporation v.071806 10
