Inhaltszusammenfassung zur Seite Nr. 1
MODEL MC1275
Heavy-Duty Steam Cleaner
Top Innovations, Inc.
6655 Troost Ave.
Kansas City, MO 64131
Tel: (800) 711-6617
(816) 584-9700
www.TopInnovations.com
customerservice@topinnovations.com
Printed in China
by Top Innovations, Inc.
Please read all instructions before use.
V080925
Mail in your warranty registration card.
Inhaltszusammenfassung zur Seite Nr. 2
LETTER FROM THE CEO WARRANTY INFORMATION Before returning any product for any reason, you MUST call or e-mail Top Innovations Dear Valued Customer, Warranty Service at (800) 711-6617 orcustomerservice@topinnovations.com to obtain a Return Authorization Number. Congratulations on purchasing your new MC1275 Heavy-Duty Steam Cleaner. This powerful product places the natural cleaning power of steam in a convenient appliance that is 30-DAY MONEY BACK POLICY perfect for use anywhere around the home
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR HEAVY-DUTY STEAM CLEANER 1. DO NOT overfill unit with water. DO NOT fill Water Reservoir with more than 48 oz. (1,420 ml.) of water. Overfilling may result in burns from spilling water, or possible electrical shock. 2. DO NOT leave your MC1275 unattended when plugg
Inhaltszusammenfassung zur Seite Nr. 4
TROUBLESHOOTING &CUSTOMER SUPPORT IMPORTANT SAFEGUARDS PROBLEM POSSIBLE CAUSE SOLUTION WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one Water spills out from Water Water Reservoir is already full. Do not try to add any more water. way. If the plug does not fit fully in the outlet, contact a licensed Reservoir fill hole when adding electrician to install a proper outlet. DO NOT attempt to modify th
Inhaltszusammenfassung zur Seite Nr. 5
HEAVY-DUTY STEAM CLEANER TROUBLESHOOTING PRODUCT INFORMATION The following features and accessories are included with your Heavy-Duty Steam Cleaner. PROBLEM POSSIBLE CAUSE SOLUTION Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 13 of this manual. Unit fails to steam. Lighted Unit is not plugged in. Plug into electrical outlet. On/Off Switch does not illuminate. Household
Inhaltszusammenfassung zur Seite Nr. 6
HEAVY-DUTY STEAM CLEANER CARE &STORAGE GUIDELINES PRODUCT INFORMATION • The Lighted On/Off Switch (1) provides a clear visual indication of whether the unit is PROPER STORAGE powered on. Preparing your Heavy-Duty Steam Cleaner for storage is quick and simple. When you • The Steam Ready Light (2) indicates when the unit is ready to begin steaming. have finished your steaming tasks, follow the steps listed below. • The Storage Compartment (3) is used for storing small accessories, and houses the
Inhaltszusammenfassung zur Seite Nr. 7
USING THE ASSEMBLING THE HEAVY-DUTY STEAM CLEANER HEAVY-DUTY STEAM CLEANER OPERATING HEAVY-DUTY STEAM CLEANER ATTACHING CARRY HANDLE NOTE: Be sure that Water Reservoir has already been filled and that all desired 1. Insert Carry Handle into Carry Handle hole accessories are connected before following these steps. on top of unit. Please refer to illustration for assistance with proper alignment 1. Plug grounded power cord into a convenient electrical outlet. (FIGURE 1). CAUTION: This unit u
Inhaltszusammenfassung zur Seite Nr. 8
ASSEMBLING THE USING THE HEAVY-DUTY STEAM CLEANER HEAVY-DUTY STEAM CLEANER ATTACHING UTILITY BRUSHES FILLING WATER RESERVOIR WITH WATER WARNING: Do not try to connect accessories while unit is emitting steam. 1. Place Heavy-Duty Steam Cleaner on a flat, level surface. 2. Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam unplugged from electrical outlet. Jet Nozzle, not to m
