Inhaltszusammenfassung zur Seite Nr. 1
Model SS200
Hands-Free Wallpaper Stripper
Please read these instructions carefully before use.
Thank you for purchasing an Earlex Hands-Free Steam Wallpaper Stripper.
In order to obtain the best results, please read these instructions BEFORE commencing any work.
Please also make a special note of the safety rules and
RETAIN FOR FUTURE REFERENCE.
Earlex Ltd. will not accept any responsibility for the use of this product,
if used for any purposes other than those detailed in this manual.
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Page 2 Safety Rules Page 3 What’s Included & Set Up Page 4 Preparation & Operation • Filling • Stripping Page 5 Completion & Storage Page 6 Safety Cut Out Other Uses & Trouble Shooting Page 7 Guarantee Page 8 Other Products in the Earlex Range SAFETY RULES - PLEASE READ CAREFULLY Please ensure that you test the plaster before commencing work. If the wallpaper stripper is left attached to the wall for long periods of time (over 10 seconds) it may loosen damaged or blown plaster. S
Inhaltszusammenfassung zur Seite Nr. 3
WHATS INCLUDED... 2 9 1 F G 4 3 D C E B A 11 6 5 7 8 10 PARTS LIST 1 Boiler 6 V acuum Seal (Spar e Part - HF0061) A Steam T ube 2 Ceiling Waste Water Collection Tank 7 Foam Filter (Spar e Part - HF0063) B Steam Plate V acuum T ube (Spar e Part - HF0021) 8 Spatula (Spar e Part - HF0086) 3 Main Steam Hose 9 Filler Cap (Spar e Part - F13) C V acuum Inlet (Spar e Part - HF0058) 10 V elcr o Straps x 4 D Steam Outlet 4 Ceiling W aste W ater Drainage Hose 11 Hose & Cable Storage Clips E
Inhaltszusammenfassung zur Seite Nr. 4
PREPARATION If the plaster underneath the Paper or Artex is in a poor state of repair, care must be taken. If the plaster is old or cracked, the steam may penetrate, causing the plaster to “blister” or fall out. Check the plaster first and do not continue if this is unsound. 1. In or der to achieve the fastest r esult it is best to gently scor e the wallpaper to be r emoved befor e operating the stripper . 2. If you have heavily embossed paper or painted paper this is essenti
Inhaltszusammenfassung zur Seite Nr. 5
CEILINGS Please note: While using the steam plate on the ceiling the unit will expel a small amount of water out of the base of the unit from the vacuum pump exhaust hose onto the surface below. Ensure that all floor surfaces are protected by dust sheets or plastic. Please ensure that the hose is unclipped from the steam plate handle when working on the ceiling, as shown. This will enable the hose to hang vertically and make sure the steam plate remains in position. 1. If you ar e right
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY CUT-OUT If the unit should cut out when being used, this is because the safety thermal cut-out has operated. W ait 2 minutes and r efill with water . The cut-out will automatically r eset and you should have to wait between eight and fifteen minutes befor e steam is again produced. The cut-out will not protect the element if a part filled unit is tilted during use in a way which enables part of the element to be out of the water for longer tha
Inhaltszusammenfassung zur Seite Nr. 7
GUARANTEE This pr oduct is guaranteed for a period of 2 years against faulty materials and workmanship. The guarantee specifically excludes the use for hir e and r ental purposes. Whilst every possible car e is taken by Earlex to ensur e that our pr oducts leave the factory in good working order, Earlex cannot under any circumstances accept liability for problems or damage caused by use of such pr oducts not in adher ence to the instructions encl
Inhaltszusammenfassung zur Seite Nr. 8
OTHER PRODUCTS IN THE EARLEX RANGE HVLP (High Volume Low Pressure) Spray Stations The Best Way to Paint Ideal for spraying all types of jobs fr om lar ge scale to small detail with equal ease. • Fast and easy • Pr ovides a quality finish with no brush marks • Can spray many types of paint such as var nishes, emulsions, glazes, wood tr eatments and many more CombiVac Workshop Vacuum & Blower WD1000 The 1100W motor pr ovides a powerful suction and blowing facility which is ideal for use ar