Inhaltszusammenfassung zur Seite Nr. 1
The Commercial CD Media Presenter
CP-100 PRO
INSTRUCTION MANUAL
http://www.datavideo-tek.com
COMPATIBLE
Inhaltszusammenfassung zur Seite Nr. 2
The Important Notice of Safety Instruction and Radio & TV Interference 1. Read all of these instructions and save them for later reference. 2. Follow all warnings and instructions marked on the products. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to th
Inhaltszusammenfassung zur Seite Nr. 3
E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance, indicating a need for service. Service, Support and Warranty It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below.
Inhaltszusammenfassung zur Seite Nr. 4
RADIO & TELEVISION INTERFERENCE UNITED STATES The equipment described in this guide generates and uses radio frequency energy. If it is not installed and used in accordance with the instructions in this guide, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfe
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS RADIO & TELEVISION INTERFERENCE 3 INTRODUCTION 5 ACCESSORIES SUPPLIED 6 ADDITIONAL ACCESSORIES FOR REMOTE CONTROL ADAPTOR 7 REAR PANEL 8 FRONT PANEL 9 INFRARED REMOTE CONTROL HANDSET 10 SYSTEM SETUP 14 OPERATION 21 CONNECTING TO A TV MONITOR 22 CONNECTING TO A VIDEO PROJECTOR OR TV/ MONITOR WITH 23 COMPONENT VIDEO 24 WHAT CAN YOU DO WITH THE GREEN GARD? INSTALLING THE GREEN CARD 25 SPECIFICATIONS
Inhaltszusammenfassung zur Seite Nr. 6
Introduction Using inexpensive recordable CD’s (CD-R’s) you may play up to 99 tracks of a video CD or you may present up to nineteen tracks of full motion video and a ‘video attract loop’ that plays continuously until another track is selected. The selected track plays only one time, then the system returns to play the attract loop until another switch is pressed. CP-100 PRO replaces existing VHS or laser disc presentation hardware solutions. Compared to DVD menu driven players, it is
Inhaltszusammenfassung zur Seite Nr. 7
Accessories Supplied Infrared Remote Control Handset 2 x “AAA” Batteries for the Handset Power Supply Power Cord 3 Phono (RCA) to 3 Phono (RCA) Audio/Video Cable 6
Inhaltszusammenfassung zur Seite Nr. 8
Additional Accessories for Remote control Adaptor With the optional Momentary Contact Switch Card, all you do is connect switches and a 9-pin cable to the Remote Adaptor (RMC-60). Momentary Contact Switch Card for connecting up to 20-switches for your own Kiosk interface Kiosk Remote Adapter (RMC-60) D-Sub 9-Pin to 9-Pin cable for connecting Momentary Contact Switch Card to the Remote Adaptor (RMC-60) 7
Inhaltszusammenfassung zur Seite Nr. 9
Rear Panel 7 6 5 1 2 4 3 1. Power Switch To switch the power on and off 2. Main DC Power Cord connecting socket To connect to the main AC power adaptor 3. Component Video Output Component Y.U.V. or R.G.B.video signal output. Although there are multiple outputs you can only use one output at a time. If you use more than one simultaneously the output signal level will be reduced. 4. External Switch Remote Interface Connect an external Datavideo Remote Adaptor (RMC-60). Support
Inhaltszusammenfassung zur Seite Nr. 10
5. Fan For proper cooling allow at least 4 inches /10 cm of clear space behind the exhaust fan of the CP-100 PRO 6. Switch to select Cable or Infrared Remote control Switch to select control mode -. Infrared Mode: Enable the Infrared remote control Handset and disable the cable control of RMC-60 -. Cable mode: Enable the cable control mode to control RMC-60 for Kiosk Keyboard Interface. 7. Audio and Video Outputs To connect left and right audio and composite or S-Video signa
Inhaltszusammenfassung zur Seite Nr. 11
Infrared Remote Control Handset 31 1 30 2 29 3 28 4 27 26 5 25 6 24 7 23 8 9 22 10 11 21 12 20 13 19 14 18 15 17 16 1. OSD (On Screen Display) Button On screen display, manually activates the display on/off 2. Eject Button Activates the CD tray to open and close 3. Numerical Keypad Selects specific tracks on a disk 4. UP Arrow Key Navigates “Up” on screen menu items 5. Clear Button Clears entries from the user programmable Play List 6. Image Index To search t
Inhaltszusammenfassung zur Seite Nr. 12
7. Right arrow Key Navigates “Right” on screen menu items 8. Next Button Skips forward to the next track during playback or navigates “down” on the screen menu items 9. ENTER Button Confirm the selected function 10. Down arrow Key Navigates Down on screen menu options 11. Slow Button To playback video in slow motion 12. PBC Button (Playback Control) Offers main manual and playback control options for commercially produced VCD’s 13. F.F. Button Picture searc
Inhaltszusammenfassung zur Seite Nr. 13
19. STOP Button Stops the disk during playback 20. Repeat Button Offers repeat playback options. Press once to repeat a single track, twice to repeat the entire disk or three times to turn the repeat function off 21. A/B Repeat Button Marks start and stop points within a track for repeat play 22. Zoom Button Zoom and out of video image. Zoom is a great feature on the CP-100 PRO. It allows you to magnify the image by hitting zoom on remote. Hit once for 1X,twice for 2X up to 8X
Inhaltszusammenfassung zur Seite Nr. 14
28. Play List Button Calls up a user programmable Play List of up to 12 tracks 29. Setup Button System configuration for “PAL / NTSC, video/audio output format, etc. 30. Power Button To switch the unit from ON to Standby mode or vice versa 31. Mute Button to mute the volume during playback 13
Inhaltszusammenfassung zur Seite Nr. 15
System Setup GENERAL SETUP Press on the “Setup” Button of Remote controller. There will pop up system General setup on TV screen, select the General setup to find more system configuration. TV TYPE Multi ---- Auto-detect the disc video system and output video NTSC/PAL accordingly NTSC -- Output NTSC video PAL ----- Output PAL Video 14
Inhaltszusammenfassung zur Seite Nr. 16
OSD LANG Select the “English” mode on screen display SPDIF OFF --- Disable the digital audio output, Output Stereo Audio ON ---- Enable the digital audio output, Disable Stereo Audio out 15
Inhaltszusammenfassung zur Seite Nr. 17
CAPTIONS ON: Enable Close Caption output OFF: Disable Close Caption output SCR SAVER SCREEN SAVER: No Function on this item 16
Inhaltszusammenfassung zur Seite Nr. 18
VIDEO O/P V/S Video: Select S-Video and Composite video output BETACAM: Select component YUV O/P and disable V/S output M-II: Select M-II video O/P and disable V/S output SMPTE: Select SMPTE Video O/P and disable V/S output RGB: Select RGB video O/P and disable V/S output MAIN PAGE Return to the main page of setup screen, Press on the “Setup” button of remote controller to go back to normal operation 17
Inhaltszusammenfassung zur Seite Nr. 19
MODE SETUP Press on the “Setup” Button of Remote controller. There will pop up system setup menu on TV screen, select the MODE Setup to find more system configuration. PLAY MODE Repeat Playback tracks. DATAVIDEO MODE: Play track one repeatedly (as manual track) until pushing a button (or GPI) and then play track two. When track two is done, play track one repeatedly until pushing another button and so on. KIOSK MODE A: The important features of this mode is that while the
Inhaltszusammenfassung zur Seite Nr. 20
AUTO RUN ON Disk in tray will auto play after system power on 。 OFF Disk in tray will not auto play after system power on 。 JUMP TIME JUMP TIME backward playback 1, 3, 5, 7 SEC Note: Under disk playback mode, press on the Left Arrow Key This is the set up function that allows every press on the left arrow key will go back a pre selected time increment. 19
