Inhaltszusammenfassung zur Seite Nr. 1
Owner’s manual
!"
사용 설명서
DXZ546MP
AM / FM CD / MP3 / WMA PLAYER
•
^jLcj=`aLjmPLtj^=
•
AM/FM CD/MP3/WMA 플레이어
Clarion Co., Ltd.
PE-2623K
2004/1 All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. 280-8009-00
Page 1 03.12.26, 4:44 PM
Inhaltszusammenfassung zur Seite Nr. 2
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, TV tuner connected via the CeNET cable. The CD changer, TV tuner have their own manuals, but no explanations for
Inhaltszusammenfassung zur Seite Nr. 3
English English English Display Items Handling Compact Discs 2. PRECAUTIONS • Do not use compact discs that have large Use only compact discs bearing the or scratches, are misshapen, cracked, etc. Use of : Disc folder indication mark. 1. When the inside of the car is very cold and the 2. Driving on extremely bumpy roads which cause such discs may cause misoperation or damage. player is used soon after switching on the : Scan indication severe vibration may cause the sound to skip. Do not play
Inhaltszusammenfassung zur Seite Nr. 4
English English English 한국어 Major button operations when external equipment is 3.CONTROLS / =/ 컨트롤 4. NOMENCLATURE connected to this unit Note: ●When the CD/DVD changer is [BND] button Source unit / 主机 / 본체 • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). • Switch the band. connected • When the button is pressed and held, switch ∗ For details, see the section “CD changer Names of the Buttons and their Functions seek tuning or ma
Inhaltszusammenfassung zur Seite Nr. 5
English 5. DCP The control panel can be detached to prevent Storing the DCP in the DCP Case theft. When detaching the control panel, store it Hold the DCP, in the orientation as shown in the in the DCP (DETACHABLE CONTROL PANEL) figure below, and put it into the supplied DCP case to prevent scratches. case. (Ensure the DCP is in the correct orienta- We recommend taking the DCP with you when tion.) leaving the car. DCP Removing the DCP 1. Press the [FNC] button for 1 second or longer to switch of
Inhaltszusammenfassung zur Seite Nr. 6
English 6. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [FUNC] [2-ZONE] [ ] [ ],[ ] [ ],[ ] [ ] BAND [ ] ISR [ ] [ ] MUTE DISP [ ] [ ] SCN RDM [ ] RPT Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IECR-6/1.5V) Batteries 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit fac
Inhaltszusammenfassung zur Seite Nr. 7
English Functions of Remote Control Unit Buttons Mode CD changer Radio CD/MP3/WMA TV DVD changer Button [FUNC] Switches among radio, CD/MP3/WMA, CD changer, DVD changer, TV and AUX. Plays the first track. Moves the next disc [BAND] Switches reception Switches reception Top play. in increasing order. band. band. Increases and decreases volume (in all modes). [ ] , [ ] [ ] , [ ] Moves preset Moves tracks up and down. Moves preset channels up and When pressed and held for 1 se
Inhaltszusammenfassung zur Seite Nr. 8
English 7. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Turning the [ROTARY] knob clockwise in- Be sure to lower the volume before switch- creases the volume; turning it counterclockwise ing off the unit power or the ignition key. The decreases the volume. unit remembers its last volume setting. If ∗ The volume level is from 0 (minimum) to 33 (maxi- you switch the power off
Inhaltszusammenfassung zur Seite Nr. 9
English Basic Operations 2. Press the [A-M] button and turning the 3. When the adjustment is complete, press the [ROTARY] knob clockwise adjusts in the + [A-M] button several times until the function direction; tuning it counterclockwise adjusts mode is reached. in the – direction. ●When “B-BOOST 0” selected, you can ad- Adjusting the bass (Gain, just the bass in the range of –3 to 3. Frequency, Q-curve) ●When “IMPACT 0” selected, you can This adjustment can be performed when the Z- adjust the b
Inhaltszusammenfassung zur Seite Nr. 10
English Basic Operations Radio Operations Adjusting the balance Listening to the radio 1. Press the [A-M] button and select “BAL 0”. 1. Press the [FNC] button and select the radio mode. The frequency appears in the display. 2. Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; 2. Press the [BND] button and select the radio turning it counterclockwise emphasizes the band. Each time the button is pressed, the ra- sound from the left speaker. dio reception band chang
Inhaltszusammenfassung zur Seite Nr. 11
English Radio Operations Note: Recalling a preset station • Be careful not to press and hold the [P/A] button A total of 24 preset positions (6-FM1, 6-FM2, 6- for 2 seconds or longer, otherwise the auto store FM3, 6-AM) exists to store individual radio sta- function is engaged and the unit starts storing tions in memory. Pressing the corresponding stations. [DIRECT] button recalls the stored radio fre- quency automatically. Instant station recall (ISR) 1. Press the [BND] button and select the de
Inhaltszusammenfassung zur Seite Nr. 12
English CD/MP3/WMA Operations 2. Files without MP3/WMA data will not play. MP3/WMA The indication “––:––” appears in the play What is MP3? time display if you attempt to play files with- MP3 is an audio compression method and clas- out MP3/WMA data. sified into audio layer 3 of MPEG standards. ● Logical format (File system) This audio compression method has penetrated 1. When writing MP3/WMA file on a CD-R disc into PC users and become a standard format. or CD-RW disc, please select “ISO9660 lev
Inhaltszusammenfassung zur Seite Nr. 13
English CD/MP3/WMA Operations If there is no disc loaded, the indication “NO Setting Set to CD Set to MP3/WMA Disc DISC ” appears in the title display. Mixed with CD and ∗ The mode changes each time the [FNC] button is Play CD Play MP3/WMA MP3/WMA type tracks pressed. (Modes are not displayed for equipment that is not connected.) CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA 2. After making these settings, remove the disc and then reinsert it. Radio
Inhaltszusammenfassung zur Seite Nr. 14
English CD/MP3/WMA Operations ●CD-TEXT disc 1 User title (disc) ➜ CD-text title (disc) ➜ Artist name ➜ CD-text title (track) ➜ User title (disc)... Root folder ●MP3/WMA disc 2 Folder ➜ File ➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜ Folder... Notes: • If the CD playing is not a CD-text CD or no user 3 title has been input, “NO TITLE” appears in the display. • If MP3/WMA disc is not input TAG, “NO TAG” ap- pears in the display. 4 • For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. •Tag displays give
Inhaltszusammenfassung zur Seite Nr. 15
English CD/MP3/WMA Operations Folder scan play Random play This function allows you to locate and play the This function allows you to play all tracks re- first 10 seconds of the first track of all the fold- corded on a disc in a random order. ers on an MP3/WMA disc. 1. Press the [RDM] button to perform random 1. Press and hold the [SCN] button for 1 sec- play. ond or longer to perform folder scan play. The indication “RDM” lights up in the display The indications “FOLDER” and “SCN” light and “T
Inhaltszusammenfassung zur Seite Nr. 16
English CD/MP3/WMA Operations Different pieces of music heard by plural listeners 3. Press the [DN] button to move to the previ- ous play list. (2-ZONE function) Press the [UP] button to move to the next play list. About the 2-ZONE function Notes: The 2-ZONE function is a function that outputs • The SCN/RPT/RDM functions cannot be used separate sounds from the MAIN zone and SUB while in the play list mode. zone by simultaneously operating two sources in the • The title display changes from folde
Inhaltszusammenfassung zur Seite Nr. 17
English Different pieces of music heard by Operations Common to plural listeners (2-ZONE function) Each Mode 2. Press the [FNC] button to select a source in Turning the screen saver function the control zone. on or off Every time the button is pressed, the follow- This unit is provided with the screen saver func- ings appear in turn. tion which allows you to show various kinds of ●For a source group included in this patterns and characters in the Operation Status unit: indication area of the di
Inhaltszusammenfassung zur Seite Nr. 18
English Operations Common to Each Mode 7. Turn the [ROTARY] knob to select the de- 1. Press and hold the [T] button for 1 second or sired character. longer to switch to the adjustment selection display. 8. Repeat step 5 to 7 to enter up to 30 charac- ters for message. 2. Press the [a] or [d] button to select “DIMMER”. 9. Press and hold the [ ] button for 2 sec- onds or longer to store the message in 3. Turn the [ROTARY] knob clockwise to “ON” memory and cancel input message. or counterclockwise
Inhaltszusammenfassung zur Seite Nr. 19
English Operations Common to Each Mode 2. Press the [a] or [d] button to select 2. Select and play a CD in the CD changer or “AUX SENS”. tune in to a TV station or TUNER for which you want to enter the title. 3. Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from 3. Press the [DISP] button and display the “HIGH”, “MID” or “LOW”. main. 4. Press the [T] button to return to the previous 4. Press the [T] button. mode. 5. Press the [a] or [d] button to move the cursor. Se
Inhaltszusammenfassung zur Seite Nr. 20
English 8. OPERATIONS OF ACCESSORIES CD Changer Operations • If a CD-text CD is not input its disc title or a track CD changer functions title, “NO TITLE” appears in the display. When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a to- Procedure to scroll a title tal of 2 changers. Set “SCROLL” to “ON” or “OFF”. Press the [FNC] button and select the CD (The factory default setting is “ON”. Refer to the changer mode
