Inhaltszusammenfassung zur Seite Nr. 1
TEC Electronic Cash Register
MA-156-1 SERIES
Owner’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operati
Inhaltszusammenfassung zur Seite Nr. 3
EO1-11099 Safety Summary Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off th
Inhaltszusammenfassung zur Seite Nr. 4
EO1-11099 Safety Summary Disconnect Disconnect If foreign objects (metal fragments, When unplugging the power the plug. the plug. water, liquids) enter the machines, cords, be sure to hold and pull on first turn off the power switches and the plug portion. Pulling on the cord disconnect the power cord plugs from portion may cut or expose the inter- the outlet, and then contact your nal wires and cause fire or electric authorized TOSHIBA TEC repre- shock. sentative for assistance. Continue
Inhaltszusammenfassung zur Seite Nr. 5
EO1-11099 TABLE OF CONTENTS Page 1. Introduction .................................................................................................................................... 1 2. Unpacking ....................................................................................................................................... 2 3. Outline of Preparation Procedure Before Operating the ECR ................................................... 3 4. Appearance and Nomenclature ...................
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
EO1-11099 1. Introduction Thank you for choosing the MA-156 series. This instruction manual provides a description of the functions and handling of this register and should be read carefully to ensure optimum performance. Since every consideration has been given to safety and reliability, there is no danger of damaging the machine by incorrect operation. Please refer to this manual whenever you have any questions concerning the machine. This machine has been manufactured under strict quality
Inhaltszusammenfassung zur Seite Nr. 8
EO1-11099 2. Unpacking 5 4 6 3 2 1 1 Journal Take-up Reel (1 pc.) 4 Printer Cover/Drawer Key (2 pcs.) 2 Paper Roll 57 mm x ø50 mm (1 pc.) 5 Owner's Manual (1 pc.) 3 Dry Batteries (SUM-3 1.5V; 3 pcs.) 6 Warranty Registration Card (1 pc.) - 2 -
Inhaltszusammenfassung zur Seite Nr. 9
EO1-11099 3. Outline of Preparation Procedure Before Operating the ECR This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation. 1 Remove the cash register from the carton, referring to Chapter “2. Unpacking” on page 2. And take out all the parts and accessories. 2 Remove the tapes and seals that are holding parts or protecting the register surfaces. 3 Plug the power cord of the register into a wall outlet. Make sure that the outlet voltage matche
Inhaltszusammenfassung zur Seite Nr. 10
EO1-11099 6 Install the Receipt or Journal roll (referring to Chapter "8. Installing the Paper Roll"). 7 Set the time and date correctly, referring to "Setting the Time and Date" in Chapter 9. 8 Set the tax tables, referring to "Tax Table Setting" in Chapter 9. 9 Perform other programming operations, such as pro- gramming of Departments, according to the require- ment of the market and your store (refer to Chapter 9 and thereafter). - 4 -
Inhaltszusammenfassung zur Seite Nr. 11
EO1-11099 4. Appearance and Nomenclature Journal Window Printer Cover Display or Receipt Outlet Power Cord Mode Select Switch Drawer Keyboard External Battery Kit Connector Printer Cover Display (Operator and Customer) The cover for the Receipt or Journal paper holder Used to confirm the entry contents and the status and the printer. of the register. (page 6) Receipt Outlet or Journal Window Mode Select Switch The receipt for the finalized sale is issued. The Mode Select Switch is provided ins
Inhaltszusammenfassung zur Seite Nr. 12
EO1-11099 6. Display Amount Message Descriptor in case Repeat Count of the mode change error s s s ... Department Code Message Descriptor Description 1234567890123456789012 Amount Displays the numeric data, such as amount, quantity, etc. Displays the current time or date when the [X/TIME] key is depressed in the REG mode. 12345678901234 12345678901234 Repeat Count Displays the repeat count of the same item being entered. The count display shows up from the second entry on, and only the last dig
Inhaltszusammenfassung zur Seite Nr. 13
EO1-11099 7. Keyboard The following shows the key layout on the MA-156 keyboard: FEED VD - % % 78 9 1 5 # PLU TAX CHK 6 4 5 2 6 RA NS X 23 CH 1 ST 3 7 PO TIME C AT/TL 000 4 8 Functions of Each Key KEY FUNCTION Clear Key: Used to clear a wrong entry or operation error. C Multiplication / Time Display Key: Used to enter sale X items by multiplication inside a sale. Also used to display TIME the time outside a sale. Feed Key: Used to feed the receipt or journal paper. FEED Numeric Keys: Used
Inhaltszusammenfassung zur Seite Nr. 14
EO1-11099 KEY FUNCTION Tax Modifier: Used inside a sale to reverse the Tax status of departments, PLUs, Dollar Discount, and Percent TAX Charge/Discount from taxable to non-taxable, or vice versa. Percent Charge or Discount Key: Used to add or subtract a percent rate, preset or manually entered, to or from the % sale or an individual sale item. Whether the key is used as Percent Charge or Percent Discount can be programmed. Subtotal Key: Used to obtain a subtotal (sale total amount ST up to
Inhaltszusammenfassung zur Seite Nr. 15
EO1-11099 8. Installing the Paper Roll WARNING! Care must be taken not to injure yourself with the paper cutter. 1 SET OFF Set the Mode Select Switch to REG positon. REG X Z 2 To remove the Printer Cover, insert the Printer Cover/Drawer Key to the Printer Cover Lock, and then Turn it 90 clock- wise. 3 Cut the paper end to make it sharp. 4 Hold the paper roll so that the paper end will be fed from the bottom. - 9 -
Inhaltszusammenfassung zur Seite Nr. 16
EO1-11099 5 Place the paper roll in the paper pocket. 6 Insert the paper end into the Paper Inlet located on the rear side of the printer, and hold down the [FEED] key on the keyboard until the paper end comes out of the outlet. 7 If the printer is used for journal,fold the top end of the paper and insert the folded end into the slit of the Take-up Reel. Then wind the paper two or three times, set the reel to the holder, and hold down the [FEED] key for a while to tense the paper. If the printe
Inhaltszusammenfassung zur Seite Nr. 17
EO1-11099 8 If the printer is used for journal, simply attach the Printer Cover. The Receipt Outlet is used as Journal Window. If the printer is used for receipts, attach the Printer Cover with the paper end coming out of the Receipt Outlet located on the Printer Cover. 9. Programming The time and date should be adjusted and such data as status of each department, percent rate, etc. should be programmed before starting sale entries. Printing occurs as programming is proceeded. • The programme
Inhaltszusammenfassung zur Seite Nr. 18
EO1-11099 (Available after the Financial Reset (Z) Report is System Option Setting taken.) ST HALC for tender amount of the [CHK] key 1 to 7 (NOTE 1 on the next page) Date Entry Order 0 : Day-Month-Year 1 : Year-Month-Day 2 : Month-Day-Year Time Print 0 : Print 1 : Non-print GT Print Even Number: Non-print Odd Number: Print The First Decimal Place Rounding Process 0 or 1 : Round Off 2 or 3 : Round Up 4 or more : Round Down Credit Balance (NOTE 2 on the next page) 0 : Prohibited
Inhaltszusammenfassung zur Seite Nr. 19
EO1-11099 NOTES: 1. HALC (High Amount Listing Capacity) is used to check excessively high amounts entered by mistake. For example, if "3" is entered, it means 3 digits and the high amount limit is 999 ($9.99). 2. Credit Balance means that amount entries through the [ - ] key will result in over-subtraction of the subtotal amount at the time of the entry through this key. If the status "Allowed" is selected, over-subtraction using the [ - ] key will be allowed. The [VD] key is not subject
Inhaltszusammenfassung zur Seite Nr. 20
EO1-11099 Department Status Setting Repeatable for other department 3 X/TIME TX/M Dept. AL/TL TAX AT/TL Submode No. Depress this key only Status Code: when setting a 0: Itemized department with 1: Single-item taxable status (NOTE below) NOTES: 1. When a department is set to be an "Itemized" department, a sale item entry through that Department Key will not immediately finalize the sale and will allow other item entries until a media key ([AT/TL], [CHK] or [CH]) is operated. When a department i
