Inhaltszusammenfassung zur Seite Nr. 1
Highlighted letters in the text of this manual correspond to the illustrations.
PRECAUTIONS
To maintain good performance
• Do not use the unit in places which are extremely hot, cold, dusty or humid. In
particular, do not use or keep the unit in following places.
• in a high humidity area such as a bathroom
XP-R220
• near a heater
• in an area exposed to direct sunlight (e.g., inside a parked car, where it can
COMPACT DISC PLAYER
become extremely hot)
• near sources of strong magnetism, such as
Inhaltszusammenfassung zur Seite Nr. 2
C DC 2.4 V using two commercially available (Ni-Cd 1.2 V 700 mAh) rechargeable batteries AC house current using the supplied AC adaptor Maximum outside dimensions 130 (W) × 30.5 (H) × 130 (D) mm (excluding projecting parts and controls) 1 1 1 (5 /8 × 1 /4 × 5 /8 in.) Weight Approx. 238 g (8.3 oz.) excluding batteries Accessories AC adaptor AC-D603 (1) Stereo headphones (1) AC adaptor AC-D603U Rated input: AC 120 V, 60 Hz The specifications and external appearance of this unit are subject to chan
Inhaltszusammenfassung zur Seite Nr. 3
USING ON RECHARGEABLE BATTERIES → E E12 • Be sure to use size AA Ni-Cd 1.2 V 700 mAh rechargeable batteries, which are commercially available. • Be sure to read the instructions of the purchased rechargeable batteries before use. • When using on rechargeable batteries for the first time, charge them until the battery indicator goes out. • Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is opened. 1 Insert the rechargeable batteries with the 0
Inhaltszusammenfassung zur Seite Nr. 4
y To enter standby mode, press ePLAY/PAUSE to start playback, then press sSTOP/OFF/CHARGE. Adjusting the sound → G Volume Turn the VOL control to adjust the volume. DSL Press DSL repeatedly for more powerful sound and deeper bass. : Deep bass is emphasized. : Deep bass is strongly emphasized. : Normal sound I Signal sound function You can check the operation by beep sound when you press an operation button. The signal sound function is activated when you purchase this unit. To use the signal sou
Inhaltszusammenfassung zur Seite Nr. 5
PLAYBACK → J J Connect the supplied headphones to the PHONES/LINE OUT jack. The amplified speaker system can be connected instead to enjoy the CD sound. 1 Release HOLD. 2 Place a disc. 3 Press ePLAY/PAUSE. Playback starts from the first track. a track number b elapsed playing time Basic operation To stop Press sSTOP/OFF/CHARGE. To pause Press ePLAY/PAUSE. To resume, press it again. 12 To search for the beginning of a track Press r or t. To locate a desired passage Keep r or t pressed. Release th
Inhaltszusammenfassung zur Seite Nr. 6
display changes to . Note • You cannot back to previous track by pressing r during random play. • You cannot select one-track repeat during random play. M Repeat play → M Press PLAY MODE during playback to select repeat play as follows. : one-track repeatB PLAY MODE V : all-track repeat V no repeat play (normal play) PROGRAM PLAY → N Up to 24 tracks can be chosen for program play. N 1 Press ENTER/DISP while in standby mode to display “P-01”. 2 Select the desired track by pressing r and t. a tra
Inhaltszusammenfassung zur Seite Nr. 7
RADIO RECEPTION O Tuning in to a station → O 1 Press BAND TUNER ON repeatedly to select AM or FM. 2 Press TUNING + (t) or - (r) to tune in to a station. After listening, press sSTOP/OFF/CHARGE to turn off the radio. For quick tuning Keep either TUNING + (t) or - (r) pressed for about 1 second. When a station is tuned in to, the frequency stops automatically. However, it does not stop if the broadcast signal is weak. For better reception → P BAND 1 FM: The headphone cord functions as the FM ant
Inhaltszusammenfassung zur Seite Nr. 8
py p S After listening, press sSTOP/OFF/CHARGE to turn off the radio. Changing the presetting 1 Press PRESET CALL UP/DOWN repeatedly to select the preset number you wish to change. 2 Keep ENTER/DISP pressed for 1 or more seconds until the preset number and the frequency flash. 3 While the preset number is flashing, press TUNING + (t) or - (r) to tune in to a station. 4 Press ENTER/DISP to preset the station on the selected preset number. BAND If the flashing stops, repeat the procedure from ste
